Famegmunkáló kellékek

Screwdriver extensions Steel Black 105° Angle Driver Adapter New Useful
Features:
*100% brand new and high quality
*Extend all kinds of screwdriver bits,screwdriver head conversion uses.Fast fastening,greatly improve work efficiency
*For use in hand-held drivers or power drills, this 1/4 inch female by 1/4 inch male magnetic bit holder
*Very helpful to remove or tighten a large number of screws after you've started or loosened them
*Use with charging screwdriver or power drill. The maximum torque of this 105 degree Angle Driver adapter is 10N and it is only for right angle head.
*NOT FOR impact drill.
*Please adjust the torque to a minimum when using the electric screwdriver. Do not rely on it to tighten the screws if the hand drill is used.
Specifications:
*Material: Stainless Steel Chrome Vanadium Steel
*Color: Black
*Holder length: 60mm/100mm/150mm
*Hex shank: 6.35mm( 1/4" )
*Fit for: 1/4" shank dirver bit
Package Contents:
3*1/4" Hex shaft screwdriver extensions
1*105° Angle Driver Adapter
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Iron Diamond Drill Bits Diamond Drill Bits 3-42mm Silver Drill holes Hot
Features:
*100% brand new and high quality
*Made of high-quality materials, durable
*Other Features: With a smooth nickel-plated surface, the resistance of the drill is reduced to a minimum, so that precise holes can be easily drilled in seconds.
*The diamond drill bit drills the hole diagonally to make a circular braid, and then keep the drill straight. Water lubrication is required when drilling.
*Suitable for drilling holes in glass, tile bottles, brick jars, fiberglass ceramic tiles, slate marble, granite pumice (especially glass and ceramic tiles).
*Each diamond hole saw is smooth and precise polished, which reduces the cutting resistance and drilling pressure, and uses water lubrication.
*Please start drilling at a 45 degree angle and align the hole form at a 90 degree angle
*Simple operation and convenient use.
*Work better with an electric drill. (not included)
Specification:
*Material: Iron, Nickel Plated, Diamond Coating
*Color: Silver (as shown in the picture)
*Size: 3/4/5/6/8/10/12/14/16/18/20/22/25/26/42mm (as pictures show)
*Quantity: 15
Package Content:
15* Diamond-Coated Hole Saw Bits
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Multifunctional Drill Bits Ceramic Wall Glass Wood Punching Hole Working Tool
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Uses: Widely used in ceramic tile, glass, brick wall, wood, etc.
*The surface is of painted and full grinding processing with anti-rust treatment which is smooth to drill.
*Single threaded U-type chip discharge groove make it smoother to drill.
*The design of triangular handle make it more fastening to clamp and not easy to slip.
Specifications:
*Material: Hard Alloy
*Color: Orange(As Pictures Show)
*Tool Holder Type: Triangle Handle
*Cooling Type: Outer C
*Optional Style:
4-10mm(5pcs)4mm 5 mm6mm 8mm 1 0mm
6-12mm(5pcs)6mm,6mm 8 mm10 mm12mm
3-12mm(7pcs)3mm 4mm 5mm 6 mm 8mm 10 mm12mm
*Handle Diameter: 2.5-9mm
*Chip Groove Length: 40-75mm
*Blade Diameter: 3-12mm
*Blade Length: 80-120mm
*Optional Quantity: 5/7pcs
Package Contents(Optional):
Package Contents1#:5Pcs 4/5/6/8/10mm Drills
Package Contents2#:5Pcs 6/6/8/10/12mm Drills
Package Contents3#:7Pcs 3/4/5/6/8/10/12mm Drills
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

1* 4-32mm Spiral Step Cone Drill Bit Hole Cutter High Speed Steel Tools Replace
Features:
*Professional Step Drill design for precision drilling different size holes from 5mm up to 35mm or 4mm up to 32mmin diameter, optimum speed and accuracy.you can achieve one-time processing of large holes, no need to replace the drill bit and positioning hole.
*High Quality Material: Made of high quality HSS.
*Easy To Drilling: Mark hole locations and Two-fluted design makes drilling faster and smoother. Surface depth gauges make drilling precise.
*Lasered Etched: Sizes are laser etched into the metal so they will not wear out even after repeated use, make precise drilling easy.
*No need for a pilot hole.
*Titanium coated to reduce friction and run cooler.
*Automatically deburr holes as you drill.
*High speed steel, durable.
*Widely used to cut holes in a variety of material like steel, wood, thin iron, aluminum alloy, insulation boards, PVC sheet, ect
Specifications:
*Colour : Silver/Black(as picture shown)
*Material : High Speed Steel
*Shank: Triangle round handle
*Scop : thin iron plate,aluminum,insulation panels,PVC panels 4mm thickness within the timber.
*Size:4-32mm(4、6、8、10、12、14、16、18、20、22、24、26、28、30、32mm)
Package Contents:
1*Drill Bit
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

ER16 Collet Chuck Holder Lathe Tool Screwdrivers Stainless Steel Silver 1 * MTB1
Features:
*100% brand new and high quality
*Made of high-quality materials, durable
* Through fine grinding inside and outside the product, the surface is smooth and shiny.
*The accuracy of the body is 0.005 to 0.01.
*High strength and hardness.
*Used for clamping locks, screwdrivers, milling cutters, reamers, etc.
*Suitable for ordinary lathes, boring machines, milling machines, drilling machines, instead of ordinary chucks, divided into threaded holes after drawing.
Specifications:
*Material: Stainless steel
*Color: silver
*Size: about 24 * 90 mm
*Thread diameter: about 16 mm
*Shank thread diameter: about 6 mm
*ER16 clamping range: 1.0 to 10.0 mm
Package Contents:
1 * MTB1-ER16 Collet Chuck Holder
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

ER16 Collet Chuck Holder MT1 Morse Screwdrivers Stainless Steel 1 * MTB1
Features:
*100% brand new and high quality
*Made of high-quality materials, durable
* Through fine grinding inside and outside the product, the surface is smooth and shiny.
*The accuracy of the body is 0.005 to 0.01.
*High strength and hardness.
*Used for clamping locks, screwdrivers, milling cutters, reamers, etc.
*Suitable for ordinary lathes, boring machines, milling machines, drilling machines, instead of ordinary chucks, divided into threaded holes after drawing.
Specifications:
*Material: Stainless steel
*Color: silver
*Size: about 24 * 90 mm
*Thread diameter: about 16 mm
*Shank thread diameter: about 6 mm
*ER16 clamping range: 1.0 to 10.0 mm
Package Contents:
1 * MTB1-ER16 Collet Chuck Holder
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

ER16 Collet Chuck Holder Morse Lathe Tool Stainless Steel Silver Taper
Features:
*100% brand new and high quality
*Made of high-quality materials, durable
* Through fine grinding inside and outside the product, the surface is smooth and shiny.
*The accuracy of the body is 0.005 to 0.01.
*High strength and hardness.
*Used for clamping locks, screwdrivers, milling cutters, reamers, etc.
*Suitable for ordinary lathes, boring machines, milling machines, drilling machines, instead of ordinary chucks, divided into threaded holes after drawing.
Specifications:
*Material: Stainless steel
*Color: silver
*Size: about 24 * 90 mm
*Thread diameter: about 16 mm
*Shank thread diameter: about 6 mm
*ER16 clamping range: 1.0 to 10.0 mm
Package Contents:
1 * MTB1-ER16 Collet Chuck Holder
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

MTB1-ER16 Collet Chuck Holder MT1 Morse Taper M6 For CNC Milling Lathe Tools 1x
Features:
*100% brand new and high quality
*Made of high-quality materials, durable
* Through fine grinding inside and outside the product, the surface is smooth and shiny.
*The accuracy of the body is 0.005 to 0.01.
*High strength and hardness.
*Used for clamping locks, screwdrivers, milling cutters, reamers, etc.
*Suitable for ordinary lathes, boring machines, milling machines, drilling machines, instead of ordinary chucks, divided into threaded holes after drawing.
Specifications:
*Material: Stainless steel
*Color: silver
*Size: about 24 * 90 mm
*Thread diameter: about 16 mm
*Shank thread diameter: about 6 mm
*ER16 clamping range: 1.0 to 10.0 mm
Package Contents:
1 * MTB1-ER16 Collet Chuck Holder
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Collet Chuck Holder MT1 Morse Lathe Tool Screwdrivers Stainless Steel Taper
Features:
*100% brand new and high quality
*Made of high-quality materials, durable
* Through fine grinding inside and outside the product, the surface is smooth and shiny.
*The accuracy of the body is 0.005 to 0.01.
*High strength and hardness.
*Used for clamping locks, screwdrivers, milling cutters, reamers, etc.
*Suitable for ordinary lathes, boring machines, milling machines, drilling machines, instead of ordinary chucks, divided into threaded holes after drawing.
Specifications:
*Material: Stainless steel
*Color: silver
*Size: about 24 * 90 mm
*Thread diameter: about 16 mm
*Shank thread diameter: about 6 mm
*ER16 clamping range: 1.0 to 10.0 mm
Package Contents:
1 * MTB1-ER16 Collet Chuck Holder
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Silver Collet Chuck Holder 1 * MTB1 ER16 MT1 Morse Milling M6 Lathe Tool
Features:
*100% brand new and high quality
*Made of high-quality materials, durable
* Through fine grinding inside and outside the product, the surface is smooth and shiny.
*The accuracy of the body is 0.005 to 0.01.
*High strength and hardness.
*Used for clamping locks, screwdrivers, milling cutters, reamers, etc.
*Suitable for ordinary lathes, boring machines, milling machines, drilling machines, instead of ordinary chucks, divided into threaded holes after drawing.
Specifications:
*Material: Stainless steel
*Color: silver
*Size: about 24 * 90 mm
*Thread diameter: about 16 mm
*Shank thread diameter: about 6 mm
*ER16 clamping range: 1.0 to 10.0 mm
Package Contents:
1 * MTB1-ER16 Collet Chuck Holder
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

6pcs Hexagon Hex Shank Thread Taps Spiral Drill Bits Set Tools High Quality
Features:
*100% brand new and high quality
*The drill bit with high hardness is anti-rust and durable.
*With the self-centering design, there is no need for auxiliary center drilling or center punching.
*It can greatly reduce the processing steps, save time and improve work efficiency.
*This bit is suitable for drilling, typing and cutting on soft metals and aluminum plates.
Specifications:
*Item Name: Drill Bit
*Material: High Speed Steel
*Quantity: 6Pc
*Features: Anti Rust, High Hardness, Durable
*Size Details
Style 1: 4.8cm x 0.63cm x 0.3cm/1.89" x 0.25" x 0.12" (Approx.)
Style 2: 5cm x 0.63cm x 0.4cm/1.97" x 0.25" x 0.16" (Approx.)
Style 3: 5.2cm x 0.63cm x 0.5cm/2.05" x 0.25" x 0.20" (Approx.)
Style 4: 5.5cm x 0.63cm x 0.6cm/2.17" x 0.25" x 0.24" (Approx.)
Style 5: 6.3cm x 0.63cm x 0.8cm/2.48" x 0.25" x 0.31" (Approx.)
Style 6: 7.1cm x 0.63cm x 1cm/2.80" x 0.25" x 0.39" (Approx.)
Package Contents:
6pcs x Drill Bit
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

HSS M1-8 Tap Wrench & 7 M1.1-M2.5 Hand Screw Taps Set Machine Repair Tool Kit
Details:
*100% brand new and high quality
*Made of HSS makes it with the highest durability
*Beautifully precise ratcheting action for high quality work
*Easy to carry, it can be operated freely in a small space
*Perfect for auto repair and machinery
*Color: Silver (As Pictures Show)
*Matrerial: HSS
*Tap Wrench: M1-8, Total Length: Approx. 140mm/ 5.51 inch
*Screw Tap Size:
M1.1*0.25
M1.2*0.25
M1.4*0.3
M1.6*0.35
M1.8*0.35
M2.0*0.4
M2.5*0.45
Package Contents:
1*M1-8 Tap Wrench
7*Screw Tap
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

5 Flute Drill Bit HSS Countersink Set Carpentry Tool 90 degree Nice 2019
Features:
Single flute edge chamfer 90 degree.
Heat treated & tempered high-carbon steel with Titanium Nitrate coating for superior cutting power.
Use on steel, aluminum & other metals, plastic or wood.
Enlarge or countersink holes, deburr edges.
Specification:
Material: HSS Drill 4241
Black Chamfer Drill Body Material: Steel #45
Dimension:
3mm(Dia) x 60mm(L)
4mm (Dia)x 75mm(L)
5mm(Dia) x 85mm(L)
6mm (Dia)x 93mm(L)
7mm(Dia) x 10mm(L)
8mm (Dia)x 11mm(L)
10mm(Dia) x 12mm(L)
Package Contents:
7 * Woodworking Chamfer
1 * L-wrench
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Rotary tools Router Bits Supplies 10pcs Carbide Single Flute Industrial
Details:
*100% brand new and high quality
*Suitable Materials: Nylon, Resin, ABS, Acrylic, PVC, MDF, hardwood and other three-dimensional sculpture, surface machining, ect.
*For: 3D relief sculpturing, cutting, engraving, slotting, milling,ect.
*Shank diameter (SD): 3.175mm(approx)
*Cutting edge diameter (CED): 3.175mm(approx)
*Cutting edge length (CEL): 17mm (approx)
*Total Length: 40mm(approx)
*Material: Carbide
*Quantity: 10pcs
*Color: As Pictures Show
Package Contents:
10*Router Bits
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Details:
*100% brand new and high quality
*Suitable Materials: Nylon, Resin, ABS, Acrylic, PVC, MDF, hardwood and other three-dimensional sculpture, surface machining, ect.
*For: 3D relief sculpturing, cutting, engraving, slotting, milling,ect.
*Shank diameter (SD): 3.175mm(approx)
*Cutting edge diameter (CED): 3.175mm(approx)
*Cutting edge length (CEL): 17mm (approx)
*Total Length: 40mm(approx)
*Material: Carbide
*Quantity: 10pcs
*Color: As Pictures Show
Package Contents:
10*Router Bits
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Burr Tungsten Carbide Steel Grinding Machine Rotary Bevel Gear Cutting Bit 10
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Hardmetal burrs used in pneumatic or electric tools, speed is 6000-40000 rpm, must clamp tool
* From right to left direction of cutting uniform movement, not like the use of wheel for reciprocating cutting
* Be careful not to overexert (pressure is generally not more than 4kg)
* Tungsten steel Solid Carbide Burrs for DIY enthusiast or hobby and craft fan, and give your rotary tool even more functionality with this set of burrs
Specifications:
* Material:Cemented carbide
* Color:As Pictures Show
* Size:10x6cm/3.94x2.36"(Approx.)
* Quantily:10pcs
Package Contents:
10*Drill Bits Set
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Angle Driver Screwdriver Adapter Drill Chuck Keyless Converter Durable
Details:
*100% brand new and high quality
*Color: Black (As Pictures Show)
*Angle Driver Screwdriver:
Material: Metal
Size: 5.9 * 3 cm (Approx.)
Angle: 105 degrees
One side has the classicĂ  Hex End Tips, which must be fixed to the tip of the screwdriver, Ratchet or any utilzzi instrument and split Hex inserts. The other side has the the same size Cavity, to accommodate the classic tips by Screwdriver.
There is only the possibility of putting in chuck inserts to unscrew and tighten screws or ad hexagonal socket tips, instead you can not put the tips to cylindrical shank.
The bearings allow for smooth rotation and, once fixed the axle on the head screwdriver, head can be rotated depending on the most comfortable working position.
*Drill Chuck:
Clamping Range: 0.3-6.5mm (Approx.)
Driver Shank: 1/4" hex shank
Keyless drill chuck for mini power drill, electric grinder.
0.3-6.5mm clamping capacity, easily clamp different size of drill bits.
Easily locks onto and releases drill bits.
Allows hex drive power drill to use conventional drill bits.
Package Contents:
1*Angle Driver Screwdriver
1*Drill Chuck
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

PH2 Screwdriver Bits 100mm S2 10 pieces Power Tool Accessories Precision
Features:
*100% brand new and high quality.
*Made of high quality material, durable and practical to use.
*100% brand new and high quality.
*Made of high quality material, durable and practical to use.
*Professional-grade power tool accessory for Phillips head fasteners.
*Heat-treated and tempered S2 tool steel absorbs shock, reisist twisting and cam-out for superior tool life. Blades have special non-slip grooves for better grip on screw face.
*It is useful to operate electronic device, perfect for electrician, mechanic and repair work.
Specifications:
*Material: S2 - Alloy Tool Steel
*Color:As pictures show
*Optional Size: 100mm(Approx.)
*Shank Style: Hex
*Magnetic: yes
*Screwdriver Bit Type:PH2
Package Contents:
10* 100mm PH2 Screwdriver Bits
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Black Spiral Drill Bit Bedding Plants 18'' Planting Yard Earth Bulb Carbon Steel
Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*The spiral drill bit is your good helper for Garden Auger.
*Suitable for planting tulips, iris, bulbs, bedding plants, and seedlings.
*The high quality as well as the efficent operation make you dig deep holes in your dirt or even under sidewalks smoothly.
*Fit for any electric or cordless drill that can accommodate a 3/8" bit.
*Material: Carbon Steel
*Type:Spiral Drill Bit
*Color:Black(As shown)
*Size(about):Diameter 40mm,Length 450mm
Pakage Includes:
1*Spiral Hole Drill Bit
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

10 X Tungsten Carbide Drill Bits Set For Ceramic Tile Concrete Glass Wood 6-12mm
Features:
*100% brand new and high quality
*High Hardness and Durable: Made of high-quality alloy material,high hardness and wear resistance, can be used for a long time.
*Useful: A spiral shaft increases stock removal to leave cleanly drilled holes, also brings fast drilling dust to remove, and 3-flats shank allows drill bit easy plug and to be held tightly.
*Multi Sizes: 10pcs in 4 different sizes, to meet different depths and widths of the hole. Suitable for most bench drill, electric drill, and drilling machine with drilling function.
*Widely Use: Suited to brick, block, stone, light concrete, ceramic, hardwood board, glass, marble materials, etc.
Specifications:
*Materials:carbide alloy
*Color:Black
*Shape:Triangular shape handle
*Size:6~12mm
3mm,4mm,5mm,6mm,8mm,10mm,12mm
*Quantity:1pcs 3mm, 1pcs 4mm, 1pcs 5mm, 4pcs6mm ,1pcs 8mm, 1pcs 10mm,1pcs12mm
Package Contents:
10pcs x Drill Bits
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Steel Spiral Hole Drill Bit Green 18inch Garden Yard Earth Bulb Newest
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Suitable for planting tulips, iris, bulbs, bedding plants, and seedlings.
*The high quality as well as the efficent operation make you dig deep holes in your dirt or even under sidewalks smoothly.
*Fit for any electric or cordless drill that can accommodate a 3/8" bit.
Specifications:
*Material:Q235 cold rolled steel
*Size:4*45cm/18inch(Approx.)
*Color:Green (As Pictures Show)
Package Contents:
1*Spiral Hole Drill Bit
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Features:
*100% brand new and high quality.
*Alloy head material with stronger hardness.
*Triangular handle design, operation more stable.
*Fine grinding of the drill body, big slot design, conducive to chip removal, no damage to the tile wall.
*Can be installed in the hand drill,electric drill,bench drill.
*Widely used in ceramic tile, glass, brick wall, wood, etc..
Specifications:
*Material: Carbide Alloy
*Color: Blue Silver (As Pictures Show)
*Specifications: 6/6/6/6/8/8/10/10/12/12mm(Approx)
*Size: As Pictures Show
*Quantity: 10Pcs/Set
Package Contents:
10 * Triangle Drill Bits
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

10 pieces Screwdriver Bits 10* Power Tool Accessories Precision Hex Shank
Features:
*100% brand new and high quality.
*Made of high quality material, durable and practical to use.
*100% brand new and high quality.
*Made of high quality material, durable and practical to use.
*Professional-grade power tool accessory for Phillips head fasteners.
*Heat-treated and tempered S2 tool steel absorbs shock, reisist twisting and cam-out for superior tool life. Blades have special non-slip grooves for better grip on screw face.
*It is useful to operate electronic device, perfect for electrician, mechanic and repair work.
Specifications:
*Material: S2 - Alloy Tool Steel
*Color:As pictures show
*Optional Size: 100mm(Approx.)
*Shank Style: Hex
*Magnetic: yes
*Screwdriver Bit Type:PH2
Package Contents:
10* 100mm PH2 Screwdriver Bits
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Cone Drill Bits Spiral Metal Cutter Hole Titanium Nitride Coated Accessory
Features:
*Professional Step Drill design for precision drilling different size holes from 5mm up to 35mm or 4mm up to 32mmin diameter, optimum speed and accuracy.you can achieve one-time processing of large holes, no need to replace the drill bit and positioning hole.
*High Quality Material: Made of high quality HSS.
*Easy To Drilling: Mark hole locations and Two-fluted design makes drilling faster and smoother. Surface depth gauges make drilling precise.
*Lasered Etched: Sizes are laser etched into the metal so they will not wear out even after repeated use, make precise drilling easy.
*No need for a pilot hole.
*Titanium coated to reduce friction and run cooler.
*Automatically deburr holes as you drill.
*High speed steel, durable.
*Widely used to cut holes in a variety of material like steel, wood, thin iron, aluminum alloy, insulation boards, PVC sheet, ect
Specifications:
*Colour : Silver/Black(as picture shown)
*Material : High Speed Steel
*Shank: Triangle round handle
*Scop : thin iron plate,aluminum,insulation panels,PVC panels 4mm thickness within the timber.
*Size:4-32mm(4、6、8、10、12、14、16、18、20、22、24、26、28、30、32mm)
Package Contents:
1*Drill Bit
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Milling Machine Mill Cutter Cutter Bit Silver 10Pcs HSS CNC Shank 4 Flute
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Flutes solid carbide coated end mills
*New condition with no chips or usage, unflawed.
*Suit for: Hardness of metal for below 30 degrees
*4 Flute End Mill Cutter
Specifications:
*Material:HSS
*Color:Silver(As Pictures Show)
*Size:(Approx.)
Cutting Diameter :1/8''
Cutting Depth:12mm
Shank Diameter:1/4''
*Quantity: 10pcs
Package Contents:
10 pcs 1/8x1/4" 4 Flute End Mill Cutter
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Milling Machine Mill Cutter Cutter Bit HSS 1/8" 4 Flute Endmill Quality
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Flutes solid carbide coated end mills
*New condition with no chips or usage, unflawed.
*Suit for: Hardness of metal for below 30 degrees
*4 Flute End Mill Cutter
Specifications:
*Material:HSS
*Color:Silver(As Pictures Show)
*Size:(Approx.)
Cutting Diameter :1/8''
Cutting Depth:12mm
Shank Diameter:1/4''
*Quantity: 10pcs
Package Contents:
10 pcs 1/8x1/4" 4 Flute End Mill Cutter
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

SDS Chuck Quick-change chuck Electric hammer Impact drill Parts Hot sale Hot
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*SDS quick chuck, easy and quick installation
*Suitable for round shank impact drill, easy to install, safe and reliable
Specifications:
Name: Quick-change chuck for impact drill
*Material: Metal plastic
*Color:As Pictures Show
*Size:As Pictures Show
*Quantity: 1 pc
Fast middle ferrule:
Adapted models: GBH2-24DF, GBH2-24DFR, GBH2-26DFR, GBH2-28DFV
Quick change short / long chuck:Adapted models: GBH2-24DF, GBH2-24DFR, GBH2-26DFR, GBH2-28DFV, GBH2-28DFR, GBH2-32DFR, GBH36 VF-L1
Package Contents:
1* Fast middle ferrule / Impact drill quick change chuck
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

SDS Chuck Quick-change chuck Electric hammer Impact drill Parts Hot sale Hot
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*SDS quick chuck, easy and quick installation
*Suitable for round shank impact drill, easy to install, safe and reliable
Specifications:
Name: Quick-change chuck for impact drill
*Material: Metal plastic
*Color:As Pictures Show
*Size:As Pictures Show
*Quantity: 1 pc
Fast middle ferrule:
Adapted models: GBH2-24DF, GBH2-24DFR, GBH2-26DFR, GBH2-28DFV
Quick change short / long chuck:Adapted models: GBH2-24DF, GBH2-24DFR, GBH2-26DFR, GBH2-28DFV, GBH2-28DFR, GBH2-32DFR, GBH36 VF-L1
Package Contents:
1* Fast middle ferrule / Impact drill quick change chuck
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

SDS Chuck Quick-change chuck Electric hammer Impact drill Parts Hot sale Hot
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*SDS quick chuck, easy and quick installation
*Suitable for round shank impact drill, easy to install, safe and reliable
Specifications:
Name: Quick-change chuck for impact drill
*Material: Metal plastic
*Color:As Pictures Show
*Size:As Pictures Show
*Quantity: 1 pc
Fast middle ferrule:
Adapted models: GBH2-24DF, GBH2-24DFR, GBH2-26DFR, GBH2-28DFV
Quick change short / long chuck:Adapted models: GBH2-24DF, GBH2-24DFR, GBH2-26DFR, GBH2-28DFV, GBH2-28DFR, GBH2-32DFR, GBH36 VF-L1
Package Contents:
1* Fast middle ferrule / Impact drill quick change chuck
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

5/7Pcs Multifunctional Drill Bits Ceramic Wall Glass Wood Punching Hole Tool
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Uses: Widely used in ceramic tile, glass, brick wall, wood, etc.
*The surface is of painted and full grinding processing with anti-rust treatment which is smooth to drill.
*Single threaded U-type chip discharge groove make it smoother to drill.
*The design of triangular handle make it more fastening to clamp and not easy to slip.
Specifications:
*Material: Hard Alloy
*Color: Orange(As Pictures Show)
*Tool Holder Type: Triangle Handle
*Cooling Type: Outer C
*Optional Style:
4-10mm(5pcs)4mm 5 mm6mm 8mm 1 0mm
6-12mm(5pcs)6mm,6mm 8 mm10 mm12mm
3-12mm(7pcs)3mm 4mm 5mm 6 mm 8mm 10 mm12mm
*Handle Diameter: 2.5-9mm
*Chip Groove Length: 40-75mm
*Blade Diameter: 3-12mm
*Blade Length: 80-120mm
*Optional Quantity: 5/7pcs
Package Contents(Optional):
Package Contents1#:5Pcs 4/5/6/8/10mm Drills
Package Contents2#:5Pcs 6/6/8/10/12mm Drills
Package Contents3#:7Pcs 3/4/5/6/8/10/12mm Drills
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

7x Impact Socket Adapter & Reducer Extension Set 1/4 3/8 1/2 Home Maintenance
Details:
*100% brand new and high quality
*Color: Black (As Pictures Show)
*Material: Alloy
*Size: 72.1*12.8mm (Approx.)
*Suitable for 1/4 inch quick change chuck systems or directly on the drill chuck./time any electric / cordless drill on a power nut driver. / Accessible for fast driving of nuts, bolts and fasteners, etc. / spring loaded ball bearing on head secures sockets
*Provides versatility and convenience no matter which tool you choose to use. Great for DIY, home maintenance, and most general repairs, not for industrial work. A great addition tool to any toolbox set
*Suitable for all types of ratchet, ratchet wrenches, socket wrenches, torque wrenches, handles, etc.
Package Contents:
4*Reducer sockets
3*Extension rods
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Wood Drill Bit Hole Cutter Hex Shank 11 steps 92mm Handle Step Practical
Details:
*100% brand new and high quality
*M35 cobalt-containing step drill (HSS Co) is a high hardness of ladder drills, mainly used in high hardness steel punch, such as stainless steel, hardened steel, meet many customers by common HSS4241 step drill work could not be completed, the real opponent of stainless steel. M35 step drill holes of the stainless steel sheet.
*Spiral Groove Size: 6-24mm
*Number of steps are 11, each step length is 5mm (Approx.)
*Handle Diameter: 6.35mm (Approx.)
*Handle Length: 92mm (Approx.)
*Partial Triangular cone length: 62mm (Approx.)
Package Contents:
1*Step Drill Bit
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Set Reducer sockets Driver DIY Kit Rods Alloy Black Workshop Hex Drill
Details:
*100% brand new and high quality
*Color: Black (As Pictures Show)
*Material: Alloy
*Size: 72.1*12.8mm (Approx.)
*Suitable for 1/4 inch quick change chuck systems or directly on the drill chuck./time any electric / cordless drill on a power nut driver. / Accessible for fast driving of nuts, bolts and fasteners, etc. / spring loaded ball bearing on head secures sockets
*Provides versatility and convenience no matter which tool you choose to use. Great for DIY, home maintenance, and most general repairs, not for industrial work. A great addition tool to any toolbox set
*Suitable for all types of ratchet, ratchet wrenches, socket wrenches, torque wrenches, handles, etc.
Package Contents:
4*Reducer sockets
3*Extension rods
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Set Reducer sockets Driver DIY Kit Bar Rods Alloy Black Hex Shank Drill
Details:
*100% brand new and high quality
*Color: Black (As Pictures Show)
*Material: Alloy
*Size: 72.1*12.8mm (Approx.)
*Suitable for 1/4 inch quick change chuck systems or directly on the drill chuck./time any electric / cordless drill on a power nut driver. / Accessible for fast driving of nuts, bolts and fasteners, etc. / spring loaded ball bearing on head secures sockets
*Provides versatility and convenience no matter which tool you choose to use. Great for DIY, home maintenance, and most general repairs, not for industrial work. A great addition tool to any toolbox set
*Suitable for all types of ratchet, ratchet wrenches, socket wrenches, torque wrenches, handles, etc.
Package Contents:
4*Reducer sockets
3*Extension rods
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

92mm Handle Drill Bit HSS-Co Wood Hole Tool Hex Shank High hardness Step
Details:
*100% brand new and high quality
*M35 cobalt-containing step drill (HSS Co) is a high hardness of ladder drills, mainly used in high hardness steel punch, such as stainless steel, hardened steel, meet many customers by common HSS4241 step drill work could not be completed, the real opponent of stainless steel. M35 step drill holes of the stainless steel sheet.
*Spiral Groove Size: 6-24mm
*Number of steps are 11, each step length is 5mm (Approx.)
*Handle Diameter: 6.35mm (Approx.)
*Handle Length: 92mm (Approx.)
*Partial Triangular cone length: 62mm (Approx.)
Package Contents:
1*Step Drill Bit
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

HSS-Co Drill Bit Steel Spiral Cone Step 6-24mm Cutter Tool High hardness
Details:
*100% brand new and high quality
*M35 cobalt-containing step drill (HSS Co) is a high hardness of ladder drills, mainly used in high hardness steel punch, such as stainless steel, hardened steel, meet many customers by common HSS4241 step drill work could not be completed, the real opponent of stainless steel. M35 step drill holes of the stainless steel sheet.
*Spiral Groove Size: 6-24mm
*Number of steps are 11, each step length is 5mm (Approx.)
*Handle Diameter: 6.35mm (Approx.)
*Handle Length: 92mm (Approx.)
*Partial Triangular cone length: 62mm (Approx.)
Package Contents:
1*Step Drill Bit
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Wood Drill Bit Hole Cutter 11 steps High hardness 92mm Handle Practical
Details:
*100% brand new and high quality
*M35 cobalt-containing step drill (HSS Co) is a high hardness of ladder drills, mainly used in high hardness steel punch, such as stainless steel, hardened steel, meet many customers by common HSS4241 step drill work could not be completed, the real opponent of stainless steel. M35 step drill holes of the stainless steel sheet.
*Spiral Groove Size: 6-24mm
*Number of steps are 11, each step length is 5mm (Approx.)
*Handle Diameter: 6.35mm (Approx.)
*Handle Length: 92mm (Approx.)
*Partial Triangular cone length: 62mm (Approx.)
Package Contents:
1*Step Drill Bit
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Corner Shank Angle Driver Adapter Drill Bit Steel Black New High Quality
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*105 degree right angle extension piece 1/4" hex driver bit drill bracket attachment
*Better drive screws and holes in tight spaces.
*Can be connected to the drill and hand wrench, this is a wrench that can be extended to places where the drill cannot reach.
Specification:
*Material: Chrome Vanadium Steel
*Short: 5.5cm * 3.2cm / 2.2 * 1.3in(Approx.)
*Long: 13.8cm * 3.2cm / 5.4 * 1.3in(Approx.)
*Hex Handle Diameter: 6.35 mm (1/4 inch)(Approx.)
*Color: Black (As pictures show)
Package Contents:
2* 105° Angle Driver Adapter
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Ceramic Drill Bits Tools Multifunctional Drill Bits Glass High quality
Features:
*100% brand new and high quality
* Made of carbide, durable
*The surface is painted, fully ground, anti-rust treatment, and the drilling is smooth
*Single thread U-shaped chip flute, smoother drilling
*The design of the triangle handle makes clamping more firm and not easy to slip
*Widely used in ceramic tiles, brick walls, wood, etc.
*Can be used for hand drill, bench drill, etc.
Specifications:
*Color: As Pictures Show
*Material: Carbide
*Cutter holder type: Triangle handle
*Category: Reamer
*Size:3/4/5/6/6/8/10/12mm
*Quantity: 8pcs
Package Contents:
8*Drill Bits(3/4/5/6/6/8/10/12mm)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Set Pocket Hole Jig W/ Dowel Drill Pin Carpenter Tool Equipment Wrench
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Solid aluminum pocket clamp, no rust or damage, long service life
* Drilling size is small and easy to carry
* Easy to adjust-Easily switch between pairs of 6/8 / 10mm drill drive adapters for any wood type, position and angle.
* Product use-Used with fixtures and drills (not included) to create or repair invisible wooden seams.
Specification:
* Product Name: Pocket Hole Jig
* Material: Aluminum Alloy Iron
* Color: Blue Black(As pictures show)
* Drill Sleeve Size: 6mm / 8mm / 10mm; Pocket Hole Jig: 68 * 38 * 20mm(Approx.)
Package Contents:
1 * Pocket Hole Jig
6 * Drill Adapters
3 * Augers
3 * Spacer Rings
1 * Wrench
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Drill Bit Cutter Diamond Glass Tile Marble Fiberglass Cutting Equipment
Details:
*100% brand new and high quality.
*Suitable for use in drill hole on glass, Fish tank, ceramic, porcelain, tile, limestone, slate, marble, granite, stone, and fiberglass etc.
*Material: Carborundum, iron base
*Size: 45mm, 50mm, 55mm, 60mm (Approx.)
*Quantity: 4pcs
*Color: As Pictures Show
Package Contents:
4*Drill Bit
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Item Details:
100% brand new and high quality
Extend all kinds of screwdriver bits,screwdriver head conversion uses.Fast fastening,greatly improve work efficiency
For use in hand-held drivers or power drills, this 1/4 inch female by 1/4 inch male magnetic bit holder
Very helpful to remove or tighten a large number of screws after you've started or loosened them
Suitable for drill,screwdriver,batch head and other to transfer.has a hardened and tempered steel shaft with a quick-release chuck
NOT FOR impact drill.
Please adjust the torque to a minimum when using the electric screwdriver. Do not rely on it to tighten the screws if the hand drill is used. Finally, you must tighten the angle driver adapter manually, or the gear will be broken off.
Product Details:
Material: Chrome Vanadium Steel
Color: Black
Length: Small:6cm, Medium:10cm, Large:15cm
Hex shank: 6.35mm( 1/4" )
Fir for: 1/4" shank dirver bit
Package included:
3 * 1/4" Hex shaft screwdriver extensions
1 * 105° Angle Driver Adapter
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Features:
*100% brand new and high quality
*The flute countersink drill bit set is made from standard high speed steel and super hard titanium coated bits
* The automatic center punch is made of pure brass
*Center hole punch creating a starting point that prevents screws and drills from wandering. Countersink drill holes into wood and soft metals countersunk screws and fixings
* Great for wooden planks, plastic, particle board, plywood, aluminum board etc
*Center punch can adjustable cap regulates striking force. Countersinking is a two-step process: pilot hole first, followed by the countersink. It's effective, but time consuming.
*A wide variety of combination countersinks do both tasks at the same time
Specification:
Material: high speed steel
Colour: As Picture Shown
*Size:
Countersink Drill Bit : 6/8/9/10/12/16/19mm
Center Punch: 130mm
Package Includes:
1 x 6mm Drill
1 x 8mm Drill
1 x 9mm Drill
1 x 10mm Drill
1 x 12mm Drill
1 x 16mm Drill
1 x 19mm Drill
1 x Automatic Center Punch
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

5PACK Countersink Drill Bit Set Quick Change Screw Hole Woodworking Chamfer Tool
Features:
*100% brand new and high quality
*Specially designed steel counterbore or counterbore guide hole.
*The depth of the counter bushing can be adjusted using an Allen wrench.
*The standard hexagon handle can be replaced quickly.
*Drills and countersunk heads are used for wood screws, no need to replace the drill bit.
*Just loosen and tighten the fixing screws, you can adjust the drilling length of screws of various lengths.
Specifiction:
*Material: YG8 alloy blade on the head, 45# carbon steel valve body, plastic sprayed surface
*Color: Orange Silver (As Pictures Show)
*Blade diameter: 8mm/10mm
*Size: 2.8mmX8mm, 3mmX8mm, 3mmX10mm, 3.2mmX10mm, 3.5mmX10mm
*Usage: Used for countersinking and opening holes in wood and aluminum alloy screws
*Quantity: 5pcs
Packaging Content:
5pcs countersink drill bits
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

90° End Mill 6Pcs Cutter Kit Accessories Round Handle 3 Flute High Quality
Details:
100% Brand new and high quality.
90° Three edge chamfering cutter
Flutes: Three edge chamfering
Material: HSS
Quantity: 6pcs
Shank: Round handle
Specification: 6.3mm/ 8.3mm /10.4mm / 12.4mm / 16.5mm / 20.5mm
Specification: head diameter * shank diameter * length
6.3MM: 6.3mm*5mm*37mm
8.3MM: 8.3mm*6mm*40mm
10.4MM: 10.4mm*6mm*39mm
12.4MM: 12.4mm*10mm*46mm
16.5MM: 16.5mm*10mm*47mm
20.5MM: 20.mm*10mm*47mm
Package Contents:
6pcs/Set 3 flute 90° HSS Chamfer Cutter Mill Drill kit
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

7Pcs/set Socket Adapter Reducer Tools W/ Colorful Extension Bars Kit For Sale
Features:
*7Pcs/set Black Socket Adapter Reducer Tools Colorful Extension Bars Kit
*100% brand new and high quality
*The ideal tool for mechanician, engineers, carpenters or bricklayers
*Allows you to mix and match unit sizes for sockets, ratchet handles, extension bars and other accessories
*General Usage: This 3 piece Hex Shank Bit Driver Extension Bar Set is designed and 4 piece converter SE plated adapters to meet a variety of needs. Fits snugly and securely in your drill chuck or hand held driver. Consisting of your most common bit sizes 1/4 quot;, 3/8 quot;, and 1/3 quot; changing shank sizes. Provides versatility and convenience no matter which tool you chose to use. Great for the DIY, household maintenance, and most general repairs, not for industrial work. A great tool addition to any tool.
Specifications:
*Color: As Pictures Show
*Material: CR-V
*Surface treatment: Nickel Plated
*Extension bar size: 1/4 (6.35mm), 3/8 (9.53mm), 1/2 (12.7mm)
*Size (Approx.):
1/4 to 3/8-length: 24mm
1/2 to 3/8-length: 36mm
3/8 to 1/2-length: 36mm
3/8 to 1/4-length: 26mm
*Height: 24mm, 36mm, 36mm, 26mm (Approx)
Package Contents:
4*Socket Adapters
3*Extension Bars
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Drill Chuck Pack Parts Bits Rotary Set Working Gadget Accessory Useful
Features:
*100% brand new and high quality.
*Three-jaw locking, high concentricity.
*Non-slip handle.
*Suitable for manual drilling of small holes in wood, bodhi, skeleton, amber, olive core, walnut, plastic and other materials.
*High strength and hardness.
*Easy to use.
*Durable in use.
Specifications:
*Clamping Range: 0.6-6mm(Approx.)
*10pcs Drills Size: 1mm, 1.5mm, 2mm, 2.5mm, 3mm (2pcs of each)(Approx.)
*Quantity:
1xHand Drill with chuck
10xDrills
Package Contents:
1xHand Drill with chuck
10xDrills
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Features:
Single flute edge chamfer 90 degree.
Heat treated & tempered high-carbon steel with Titanium Nitrate coating for superior cutting power.
Use on steel, aluminum & other metals, plastic or wood.
Enlarge or countersink holes, deburr edges.
Specification:
Material: HSS Drill 4241
Black Chamfer Drill Body Material: Steel #45
Dimension:
3mm(Dia) x 60mm(L)
4mm (Dia)x 75mm(L)
5mm(Dia) x 85mm(L)
6mm (Dia)x 93mm(L)
7mm(Dia) x 10mm(L)
8mm (Dia)x 11mm(L)
10mm(Dia) x 12mm(L)
Package Contents:
7 * Woodworking Chamfer
1 * L-wrench
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

5 Flute Drill Bit Countersink Set 3 4 5 6 7 8 10mm Carpentry Nice 2019
Features:
Single flute edge chamfer 90 degree.
Heat treated & tempered high-carbon steel with Titanium Nitrate coating for superior cutting power.
Use on steel, aluminum & other metals, plastic or wood.
Enlarge or countersink holes, deburr edges.
Specification:
Material: HSS Drill 4241
Black Chamfer Drill Body Material: Steel #45
Dimension:
3mm(Dia) x 60mm(L)
4mm (Dia)x 75mm(L)
5mm(Dia) x 85mm(L)
6mm (Dia)x 93mm(L)
7mm(Dia) x 10mm(L)
8mm (Dia)x 11mm(L)
10mm(Dia) x 12mm(L)
Package Contents:
7 * Woodworking Chamfer
1 * L-wrench
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

7 Pcs Drill Bit Wood 5-Flute HSS Countersink Set 3/4/5/6/7/8/10mm Carpentry Tool
Features:
Single flute edge chamfer 90 degree.
Heat treated & tempered high-carbon steel with Titanium Nitrate coating for superior cutting power.
Use on steel, aluminum & other metals, plastic or wood.
Enlarge or countersink holes, deburr edges.
Specification:
Material: HSS Drill 4241
Black Chamfer Drill Body Material: Steel #45
Dimension:
3mm(Dia) x 60mm(L)
4mm (Dia)x 75mm(L)
5mm(Dia) x 85mm(L)
6mm (Dia)x 93mm(L)
7mm(Dia) x 10mm(L)
8mm (Dia)x 11mm(L)
10mm(Dia) x 12mm(L)
Package Contents:
7 * Woodworking Chamfer
1 * L-wrench
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.