Szelepek és elosztók

Feature:1. Safe to use, button valve is with aluminum alloy shell, which withstands pressure and explosion.
2. With low failure rate for long service life, the mechanical valve supports mechanical structure.
3. Mechanical valve can be widely applicated in various pneumatic systems for thread connection form.
4. After many inspections before leaving the factory, the air valve's quality is guaranteed, you can use it with confidence.
5. In two-position three-way, button valve can also work as a switch valve, easy to use in the practical life.
Specification:
Item Type: Valve
Nominal Pressure: 0 ~ 0.8Mpa
Product Alias: Switch valve, button valve, mechanical valve
Scope of Application: Widely applicated in various pneumatic systems
Material: Aluminum alloy
Connection Form: Thread
Working Temperature: -10--60 ℃
Type: Three-way
Diameter: Approx. 6mm / 0.2in
Pipe Diameter: G1 / 4 inch
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Valve

Feature:1. Adopts stainless steel 304 material of good rust resistant and high stability.
2. Water, oil, gas and other media can be used, and it is widely used.
3. Accurate thread,long term use without slippery or stuck,good sealing and not easily leaking.
4. Widely used in pneumatic equipment to deliver compressed air to maintain the operation of pneumatic tools.
5. There are 7 kinds of ball valve of different connection pipe diameter.
Specification:
Item Type:Straight in Ball Valve
Material:Stainless Steel
Type:(Connection Pipe Outer Diameter x Inner Diameter)
6 x 4mm/8 x 5mm/8 x 6mm/10 x 6.5mm/10 x 8mm/12 x 10mm/12 x 8mm(Optional)
Package List:1 x Valve

Working Method: Short-term quota system (intermittent periodic duty-type)

Features:
This electric solenoid valve is N/C normally type, suitable for water supply.
Durable, practical and stable.
Moisture-proof and anti-corrosion.
The electric solenoid valve is made of high quality plastic and brass material, with long serving life.
It is a good choice to replace the bad work solenoid valve for machine.
Specifications:Material: Plastic Brass
Rated voltage: DC 12V
Thread: DN20
Environmental Temperature: 0-40°C
Applicable media: (0-55°C) Water
Operation mode: Normally
Working pressure: 0.02-0.8Mpa
Size: Approx. 7 x 6.5cm / 2.75 x 2.5inch
Weight: Approx. 213g
Package Included:1 x Dual Head Electric Solenoid Valve

Feature:1. Transparent voltage universal indicator plug can be used for water pressure solenoid valve coil.
2. Waterproof and dustproof plug is easy to use in the practical life, which makes itself getting great popularity.
3. Durable, transparent plug with light without wire supports exquisite craftsmanship, light and practical.
4. Adopts PA socket material and PC shell material, such plug supports wiring method of screw crimp.
5. Protection level is IP67 after plugging and tightening. This kind of plug is improved for more durability.
Specification:
Item Type: Plug
Fixing Method: Center screw 0.4Nm
Wiring Method: Screw crimp
Protection Level: IP67 after plugging and tightening
Mechanical Life: ≥50 insertion and removal cycle
Working Voltage: DC24V / 12v (optional)
Rated Current (40 ℃) 10A
Socket Material: PA
Shell Material: PC
Color: Transparent
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
5 x Plug
5 x Screw
5 x Dust-Proof Pad
5 x Apron

1/2" AC 220V N/C Brass Electric Solenoid Magnetic Valve for Water Flow Control
Features:
No power consumption, having direct stability of water adjust.
Brass brass casting structure is and reliable hard-wearing, anti-corrosion and precise.
Pressure regulating valve (steady flow valve) function similar to water flowswitch.
This solenoid valve not just can keep the constant current steady flow, but also prevent the dry burning and monitoring the flow.
Easy to install and maintain.
Specification:Valve Body: Brass
Thread Size: 1/2"
Weight: 212g
Size: Approx. 6 * 6.4cm / 2.4 * 2.5inch
Operating Altitude: ≤2500m / 8202ft
Operating Temperature: 0 - 40℃
Operating Humidity: <95% (at 25℃)
Type: Guide (One-way) Solenoid Valve
Rated Voltage: AC 220V
Operating Mode: Short-time Quota System
Insulation Grade: E
Fluid: Water
Fluid: Temperature: 0℃ - 55℃
Water Pressure: 0.02 - 0.8MPa
Water Flow Features:Water Pressure (Mpa): 0.02, 0.1, 0.3, 0.8
Flow (L/min): > 5 > 11 >18 > 32
Lifespan: >100,000 Times
Package Includes:1 x Water Valve(not include battery)

Features:
100% brand new and high quality
Mainly used for induction cleaner, prepaid water saving system, garden irrigation, etc
Compact size, beautiful appearance, stable performance
The solenoid valve is made of high quality brass material, great wear-resisting performance, durable in use
Suitable for battery power supply environment, saving electricity and saving water
Specifications:
Working voltage: DC 4.5V
Working mode: positive pulse open valve, negative pulse off
Pulse width: 30ms
Working pressure: 0.02-1Mpa
Medium temperature: 1-80℃
Service life: 300,000 times
Size: 5.5 x 5cm / 2.17 x 1.97in
Weight: 130g
Wiring method: red: " ", : " -"
Package included:
1x Solenoid Valve

The swing check valve is mainly used for the one-way flow of the medium in the pipeline, which only allows the medium to flow in one direction to prevent the medium from backflow.
Features:
1. Made of high quality stainless steel, sturdy and durable for long term use.
2. With good resistance to corrosion and high pressure.
3. Good sealing capability prevents the fluid from leaking.
4. 3/4inch standardized thread, suitable for most pipeline system.
5. Applicable for water, steam, oils, nitric acid, urea and more.
6. Mainly used in the pipelines of petroleum, chemical, pharmacy, fertilizer, electricity.
Specification:
Material : 304 Stainless Steel
Thread: DN20 3/4"
Flow Direction: One Way
Color: Silver
Size (L*H): 7.5*6cm / 2.95*2.36n
Weight: Approx. 284g/10.0oz
Package list:
1 * Swing Check Valve
Note:
1. Due to the difference between monitors and light effect, the pictures may not reflect the actual color of the item.
2. Please allow slight error due to manual measurement. Thanks for your understanding.

Brass Valve Heavy-duty Male And Female Threaded Valve 1-inch BSP DN25 Water Pipe
Features:
Valve is made of brass for rust protection and long service life.
Ball valve is durable, performing well after many cycles, and reliable, closing securely even after long periods of disuse.
Ball valve's ease of operation, repair, and versatility lend it to extensive industrial use.
Handle lies flat in alignment with the flow when open and perpendicular when for easy visual confirmation of valve's status.
This high quality ball valve would be excellent choices for shutoff and control applications.
Specification:
Material: Brass
Type: Male and female thread
Nominal Diameter: DN25 (1"BSP)
Suitable Fluid: Water
Pressure: Normal pressure
Temperature: Normal temperature
Flow Direction: Dual-direction
Weight: 280g / 9.9oz (approx.)
Package list:1 * Ball Valve

Features:
This is a normally close type electric solenoid valve, power on to open it and power off to close it.
Connect to DC 12V voltage and rated current is 300mA to ensure a stable performance.
The high quality brass valve body would hold a pressure up to 0.8Mpa.
Suitable for use with pipelines in water applications, and water temperature is 0℃~55℃.
There is an arrow sign on valve showing flow direction, please follow the sign to connect pipes.
Specifications:
Valve Body: Brass
Type: Normally closed
Rated Voltage: DC 12V
Rated Current: 300mA
Fluid: Water
Water Temperature: 0℃~55℃
Water Pressure: 0.02MPa~0.8MPa
Thread Size: G3/4
Lifespan: >100,000 times
Operating Temperature: 0℃~40℃
Operating Humidity: <95% (at 25℃)
Altitude: ≤2500m
Weight: 236g(approx.)
Package Includes:
1 x Solenoid Valve
Note: Please allow small size error due to manual measurement. Thanks for your understanding.

Features:
1. Suitable for air , it can help to save electric energy of the air .
2. A direct replacement for an old or broken one.
3. Made of high quality materials with long mechanical life.
4. Easy to install and convenient to use.
5. The pressure switch can work stable at the pressure of 75~120psi.
Specification:
Condition: 100% Brand New
Item Type: Pressure Switch
Model: FBANG-four holes
Type: Mechanical pressure switch
Rated Voltage: 220 (V)
Rated Current: 10 (A)
Mechanical Life: 500 million times
Working Pressure: 5.5~8kg/c㎡ (75~120psi)
Interface: /4"
Package List:
1 x Pressure Switch

Feature:1. Polishing treatment inside and outside to meet the requirements.
2. , seamless, automatic emptying of the craft fluid channel, for steam to meet cleaning in place needs.
3. Made of SUS304 and 316L, it can meet the special requirements of various media in the field of food and bio-pharmaceutical.
4. Widely used in food and beverage, dairy, beer brewing, bioengineering, pharmaceutical and fine chemical industries.
5. High- sanitary grade pipeline, mirror-polished inside the three layers, easy to disinfect, deodorant, easy to remove and wash.
6. It adopts no dead angle processing to the medium has no residue and easy to clean.
Specification:
Condition: 100% Brand New
Item Type: Check Valve
Material: Stainless Steel 304
Fluid Working Pressure: 1.6 Mpa, 229PSI
Quality Level: Sanitary Level
Size: 1-1 / 2in
Ferrule Outer Diameter: Approx. 50.5mm / 2in
Working Principle:H81F sanitary quick-release check valve When the medium flows into the valve body as indicated by the of the valve body, the pressure of the medium acts on the valve flap to generate upward thrust. When the medium thrust is greater than the gravity of the valve flap, the valve opens. When the force of the medium pressure acting on the valve flap plus the force of the valve flap itself is greater than the force exerted on the valve flap by the pre-valve pressure, the valve is to prevent the medium from flowing backward.
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:1 x Check Valve

Features:
1. 100% brand new and high quality.
2. Made of high quality plastic material, durable with long service life.
3. Moisture-proof and anti-corrosion.
4. Designed with thread connector, easy to install.
5. Suitable for household appliances, industrial equipment, medical equipment, etc.
Specifications:
Rated Voltage: AC 220V
Frequency: 50Hz
Water Inlet: G3/4 (26mm)
Water Outlet Diameter: 12mm
Applicable Fluid: Water
Flow Direction: One-way
Working Pressure: 0.8MPa
Flow: ≥25L/min
Working Temperature: 0-85℃
Weight: Approx. 253g
Package List:
1 x Solenoid Valve

Lightweight Pneumatic Solenoid Valve Solenoid Valve Fuel Oil for Air Water Gas
Features:
1. 100% brand new and high quality.
2. Direct-acting normally 2/2-way solenoid valve, quick and sensitive to change.
3. Compact structure, small size, light weight, it is convenient to assembly and disassembly.
4. Made of brass material, electromagnetic coil heat resistance grade is B.
5. The coil protection level is IP65, and the power connection mode is lead-out type and junction box type.
Specification:
Condition: 100% Brand New
Withstand Voltage: 1MPA, 10KG kg
Fluid Temperature: -5℃ -80℃
Weight: Approx. 285g / 10.1oz
Package List:
1 * Valve

Mechanical Hand Valve Two-Position Three-Way G1/4-Inch Accessory Industrial
Feature:1. With aluminum alloy shell, hand valve can withstand pressure and explosion, which is safe to use.
2. mechanical structure design supports low failure rate and long service life.
3. Widely used in various pneumatic systems, mechanical valve is with thread connection form.
4. In two-position three-way, button valve can also work as a switch valve, easy to use in the practical life.
5. After many inspections before leaving the factory, the air valve's quality is guaranteed, you can use it with confidence.
Specification:
Item Type: Valve
Nominal Pressure: 0 ~ 0.8Mpa
Product Alias: Switch valve, button valve, mechanical valve
Scope of Application: Widely used in various pneumatic systems
Material: Aluminum alloy
Connection Form: Thread
Working Temperature: -10--60℃
Type: Three-way
Diameter: Approx. 6mm / 0.2in
Pipe Diameter: G1 / 4 inch
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Valve

2 Position Aluminum Alloy XQ250622 Hand Valve 5 Way Pneumatic Systems Pull Lever
Feature:1. The aluminum alloy shell is pressure and explosion proof, safe to use
2. Accuracy mechanical structure design, low failure rate and long service life
3. Reasonable structure and design, great choice for you
4. The connecting port diameter is G1/4in which is simple to connect
5. Widely used in various pneumatic systems
Specification:
Item Type: Hand Pull Lever Valve
Nominal Pressure: 0 ~ 0.8Mpa
Scope of Application: Widely used in various pneumatic systems
Material: Aluminum alloy
Connection Form: Thread
Working Temperature: -10-60 degrees Celsius
Type: 5-Ways
Size: 6mm
Connecting Port Diameter: G1/4"
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Hand Pull Lever Valve

Feature:1. High-quality hand valve, stable and reliable performance.
2. Low friction resistance, low pneumatic pressure and long service life.
3. With hand lever, can be controlled manually to deal with some special situations.
4. thread connection form, tight connection, no leakage.
5. Made of high quality materials, anti-corrosion, heat resisting, rustproof and extending the service life.
Specification:
Item Type: Hand Pull Valve
Model TSV98322-M
Nominal pressure 0 ~ 0.8Mpa
Nominal diameter G1/4in
Working Mode: Direct acting
Material: Aluminum alloy
Connection Form: Thread
Pressure Environment: Atmospheric pressure
Working Temperature: Normal temperature
Type: 2-position 3-way
Flow Direction: Commutation
Form: Diaphragm valve
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Hand Pull Valve

Features:
Direct acting normally close 2 position 2 way Electric Solenoid Valve, direction and high sensitivity.
Compact structure, small size, light weight, easy to assemble and dismantle;
Valve body is made of brass material, electromagnetic coil heat resistance grade is B, and with standard seals.
Suitable for a variety of working media, such as water, air.
The coil protection grade is IP65.
Specifications:
Valve material: Brass
Type: Normally Close Type
Connector size: /4" (12mm)
Temperature resistance: 100℃
Voltage: 110VAC
Suitable Medium: Water, Air
Size: 7.5 x 4.2cm / 2.95 x 1.65in
Weight: 316g
Package included:
1 x Electric Solenoid Valve
Note:
1. The outlet water of the solenoid valve cannot reflux, and the check valve shall be installed if want to achieve backflow effect (check valve not included)
2 .The two wires are same, no distinction between positive and negative.

Features:
Valve bodies are made of brass for rust protection and long service life.
Ball valves are durable, performing well after many cycles, and reliable, closing securely even after long periods of disuse.
This high quality ball valves would be excellent choices for shutoff and control applications.
It has minimal flow resistance, and the closing piece can withstand the high pressure difference during closing.
The valve can realize fast opening and closing, compact structure, small size and light weight.
Specification:
Material: Brass
Nominal Diameter: DN32 (1-1/4BSP)
Pressure: 1.6MPa
Liquid: Water, oil, gas
Quantity: 1
Weight: 408g / 14.4oz (approx.)
Package list:
1 * Ball Valve
Note: Ball valve is the control part of the pipeline system that can quickly cut off and turn on fluid. Choosing the corresponding ball valve and it shall be regulated, installed and maintained correctly. It is widely used in water supply, gas, HVAC, oil pipe and other systems.

This three-piece ball valve is mainly used in the pipeline to control and regulate media, which is suitable for water, oil, non-corrosive liquid and non-flammable gas.
Features:
1. With simple structure, small volume and light weight, convenient for maintenance.
2. Easy operation, quick opening and closing and good sealing performance.
3. The sealing surface between the ball and valve is isolated from the media so that the passing medium will not cause its erosion.
4. The flow direction of the medium is not restricted by the installation direction.
5. Small fluid resistance ensures fast flow .
6. Widely used to control and regulate media such as water, oil, non-corrosive liquid and non-flammable gas.
Specification:
Material: 304 Stainless Steel
Operating Pressure: 1000psi (WOG)
Operating Temperature: -20 ~ 200℃
Hole Diameter: 24mm/0.94in
Package Weight: Approx. 482g/17.0oz
Package list:
1 * Ball Valve

Features:
Made of high quality 304 stainless steel material, this gate valve is sturdy and durable.
The internal fluid path of valve body is straight through which allows fluid to flow in a straight line and the flow resistance is small.
It's easier to open and close, because the movement direction of the gate is perpendicular to the flow direction, whether on or off.
It is suitable for water, oil, gas, steam, etc.
Widely used in mechanical equipment, chemical equipment, industrial equipment, water supply and drainage equipment, pharmaceutical equipment, petrochemical equipment, etc.
Specification:
Material: 304 stainless steel
Nominal Diameter: DN20 (G3/4)
Ambient Pressure: Normal pressure
Flow Direction: Two directions
Operating Temperature: Normal temperature
Weight: Approx.404g/14.3oz
Package list:1 * Gate Valve

Features:
1. 100% brand new and high quality.
2. Direct-acting normally closed 2/2-way solenoid valve, quick and sensitive to change.
3. Compact structure, small size, light weight, it is convenient to assembly and disassembly.
4. Made of brass material, electromagnetic coil heat resistance grade is B.
5. The coil protection level is IP65, and the power connection mode is lead-out type and junction box type.
Specification:
Condition: 100% Brand New
Withstand Voltage: 1MPA, 10KG kg
Fluid Temperature: -5℃ -80℃
Weight: Approx. 473g / 16.7oz
Package List:
1 * Valve

Features:
1. 100% brand new and high quality.
2. Made of high quality brass material, durable to use.
3. Adopt rolling process, good sealing
4. It is anti-aging and corrosion resistant
5. Water pressure regulator is installed on horizontal pipes generally.
Specification:
Condition: 100% Brand New
Model: 905
Material: Brass
Connection Form: Thread
Applicable Temperature: -10℃ -120℃
Working Pressure: 1.6Mpa
Structural Form: Piston Type
Weight: Approx. 446g / 15.7oz
Package List:
1 * Regulating Valve

Features:
Made of high quality brass, high hardness and corrosion resistance.
Electromagnetic valve reverse quickly and sensitively.
Low energy consumption, high flow.
Keep constant current steady flow as well as preventing the dry burning and monitoring the flow.
Designed to control automatically the liquid, air and gas, perfect for electrically driven pneumatic power control.
Specification:Material: Brass
Weight: Approx. 1305g/46oz
Color: Gold
Flow Pore: 25MM
CV: 23
Pipe Joint Thread: /4
Working Pressure: 0.05~0.7Mpa
Diaphragm Form: NBR
Temperature: -10~80℃
Minimum Excitation Time: 0.05s
Voltage: DC12V, DC24V, AC110V, AC220V (Optional)
Applicable Fluid: Air, Water, Light Oil
Size: 9.8*7.5*12cm/3.9*3*4.7inch
Package List:1 x Electromagnetic Valve
Note:1. Please allow slight error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Features:
The motorized ball valve is mainly used for controlling water system of heating ventilation air conditioning.
Made of high quality brass material, the valve is sturdy and durable.
The three wire motorized ball valves offers a unique level of control.
The ball valve is convenient to use and has a stable performance.
Widely used in heating, air conditioning systems, floor heating systems, solar water heater and other systems.
Specification:
Valve Material: Brass
Motor Type: Synchronous motor
Max. Pressure Difference: 1MPa
Nominal Pressure: 1.6MPa
Power: 6W
Suitable Fluid: Cold/hot water or 60% ethyl
Liquid Temperature: 2~95℃
Nominal Diameter: DN25 ()
Voltage: AC220V
Weight: Approx.669g/23.6oz
Package list:1 * Motorized Ball Valve

Features:
This electric solenoid valve is N/C (normally type), suitable for water drain.
Durable, practical and stable.
Moisture-proof and anti-corrosion.
The electric solenoid valve is made of high quality plastic and brass material, with long serving life .
With 1 inlet and 4 out port, convenient to use, improve work efficiency greatly.
Specifications:Material: Plastic Brass
Rated voltage: DC 12V
Pattern: 1 in 4 out
Inlet thread: DN20
Outlet external diameter: 12mm
Outlet inner diameter: 8mm
Applicable media: Water
Connection form: external thread
Inlet working pressure: 0.02-0.8Mpa
Outlet working pressure: Non-pressure
Size: Approx. 11.5 x 10cm / 4.53 x 3.94inch
Weight: Approx. 442g
Package Included:1 x Electric Solenoid Valve

Descriptions:
This product consists of a ball valve and an actuator, the actuator is driven by a synchronous motor and has a built-in limit switch that allows the valve to be de-energized when or . Can be used in air conditioning system and plumbing systems.
Features:
This motorized ball valve is mainly adopted of brass forging, reliable and durable.
Low noise, running noise less than 40dB.
Ball valve and actuator for nut connection Installation, quick disassembly.
Precision structure, close tightly, no leakage.
Can be used in air conditioning system and plumbing systems.
Specifications:Body material: brass
Working temperature: normal temperature
Working medium: water, oil, air
Nominal pressure: 1.6MPa
Connection: thread
Nominal diameter: 20(mm)
Connector: /4 DN20
Weight: 508g
Wiring diagram:
Package Included:
1 x motorized ball valve with cable

Features:
for engraver printer machine, suitable for NEJE 1000mW engraver only.
Long time use, carving time will last much longer than other head and more stable.
1000mW blue-violet light , higher , support more types of materials.
Can be carved items included hardwood, plastic, bamboo, rubber, leather, cut paper and so on.
Note that is dangerous, it is necessary to use protective to avoid eyes injuries.
Specifications:
Material: Metal
Wavelength: 405nm
Power: 1000mW
Light Color: Blue-violet light
Input Voltage: 5V
Input Current: 300mA
Quantity: 1
Package Includes:
1 x

Description:
If your central heating or irrigation sprinkler system isn't working correctly, it could be down to the solenoid valve. Repair a faulty valve with this 24V DC replacement which is suitable for use with pipelines in water, air, gas and low viscosity non-corrosive fluid applications.
Features:
This is a normally close type electric solenoid valve, power on to open it and power off to close it.
Connect to DC 24V voltage and the suggested input current is more than 2A to a stable performance.
The high quality brass valve body would hold a press up to 1Mpa and liquid temperature from -5℃ to 80℃.
Suitable for use with pipelines in water, air, gas and low viscosity non-corrosive fluid applications.
This solenoid valve is designed to installed indoors horizontally in a dry environment. If used outdoors, the coil part should be well protected from water.
Better for intermittent short time work, single continuous power on time is better to be less than 30 minutes.
Specifications:
Valve Body: Brass
Input Voltage: DC24V
Input Current: >2A
Power: 16W
Type: NC(Normally Close)
Pressure: 0-1.0Mpa
Thread Size: 3/4" BSPP (DN20)
Flow Orifice: 20mm
Material: NBR
Liquid Temperature: -5~80℃
Suitable for: Non-corrosive oil, water, gas, etc
Package Includes:
1 x Solenoid Valve

Features:
The motorized ball valve is mainly used for controlling water system of heating ventilation air conditioning.
Made of high quality brass material, the valve is sturdy and durable.
The three wire motorized ball valves offers a unique level of control, specifically, it offers two point control.
For more complicated system, automated systems, the 3 wire two points of control system is a good choice.
The ball valve is convenient to use and has a stable performance.
Specifications:Valve Material: Brass
Type: 2-Way 3-Wire 2-Point Control
Voltage: 220V AC (50/60Hz)
Power: 6W
Working Fluid: Water, air, oil
Working Pressure: 1.6mPa
Thread Size: /4 (DN20)
Operating Temperature: 2℃ to 95℃
Wiring Method:(Dual-color): N(COM)
BR(Brown): L(Valve Close)
BL(Blue): L(Valve Open)
Weight: 542g(approx.)
Package Included:1 x Motorized Ball Valve

Features:
It consists of actuators and brass valves. Generally suitable for hvac fan coil and hvac end hot and cold water system control
The product occupies little external space, can be installed close to the wall.
Low working noise, flexible wiring and convenient
Ball valve and actuator for nut connection Installation, quick disassembly.
This motorized ball valve is mainly adopted of brass forging, reliable and durable.
Specifications:
Body material: brass
Voltage: DC12v
Port: DN15 /2
Nominal size:10 mm/0.39in
Internal thread: 20mm/0.79in
Sealing material: polybasic disodium
Operating temperature: normal temperature
Valve performance characteristics: 90 degree rotation
Working medium: water
Nominal pressure:1.6Mpa
Connection: thread
Weight: 450g
Wiring method:
Blue wire: open valve, brown wire: close valve, dual colors wire: Neutral wire
Package includes:
1 x Brass ball valve

Features:
Valve bodies are made of brass for rust protection and long service life.
Ball valves are durable, performing well after many cycles, and reliable, closing securely even after long periods of disuse.
This high quality ball valves would be excellent choices for shutoff and control applications.
It has minimal flow resistance, and the closing piece can withstand the high pressure difference during closing.
The valve can realize fast opening and closing, compact structure, small size and light weight.
Specification:
Material: Brass
Nominal Diameter: DN40 (1-1/2"BSP)
Pressure: 1.6MPa
Liquid: Water, oil, gas
Quantity: 1
Weight: 659g / 23.2oz (approx.)
Package list:
1 * Ball Valve
Note: Ball valve is the control part of the pipeline system that can quickly cut off and turn on fluid. Choosing the corresponding ball valve and it shall be regulated, installed and maintained correctly. It is widely used in water supply, gas, HVAC, oil pipe and other systems.

Description:This electric ball valve is made of high quality brass, durable for use. This 2 way 3-wire ball valve can be rotated 90 degrees. DN15 and DN25 two model for you to choose.
Features:
Made of high quality brass with durable performance.
Highly energy saving, long life design.
Suitable for medium of water, gas, oil.
This 2 way 3-wire ball valve can rotate 90 degrees.
DN15 and DN25 two models for you to choose.
Specifications:Valve material: brass
Operation temperature: normal
Rotation: 90 degree
Medium: water, gas, oil
Operation pressure: 1.6mpa
Connection: thread
Power Supply: AC 220V
Control method: 2 Way 3-Wire
Model(Optional): DN15, DN25
Weight: 447g(DN15), 608g(DN25)
Size: 12*7*6cm / 4.7*2.8*2.4inch, 13*7*6.3cm / 5.1*2.8*2.5inch
Quantity: 1pc
Package Included:1 x Ball Valve

Descriptions:
This product consists of a ball valve and an actuator, the actuator is driven by a synchronous motor and has a built-in limit switch that allows the valve to be de-energized when or . Can be used in air conditioning system and plumbing systems.
Features:
This motorized ball valve is mainly adopted of brass forging, reliable and durable.
Low noise, running noise less than 40dB.
Ball valve and actuator for nut connection Installation, quick disassembly.
Precision structure, close tightly, no leakage.
Can be used in air conditioning system and plumbing systems.
Specifications:Body material: brass
Working temperature: normal temperature
Working medium: water, oil, air
Nominal pressure: 1.6MPa
Connection: thread
Nominal diameter: 17 (mm)
Internal thread: 25mm
Connector: /4 DN20
Weight: 455g
Wiring diagram:
Package Included:
1 x motorized ball valve with cable

Features:
It consists of actuators and brass valves. Generally suitable for hvac fan coil and hvac end hot and cold water system control
The product occupies little external space, can be installed close to the wall.
Low working noise, flexible wiring and convenient
Ball valve and actuator for nut connection Installation, quick disassembly.
This motorized ball valve is mainly adopted of brass forging, reliable and durable.
Specifications:
Body material: brass
Voltage: DC12V
Port: DN20 /4
Nominal size:17mm/0.67in
Internal thread: 25mm/0.98in
Sealing material: polybasic disodium
Operating temperature: normal temperature
Valve performance characteristics: 90 degree rotation
Working medium: water
Nominal pressure: 1.6Mpa
Connection: thread
Weight: 512g
Wiring method:
Blue wire: open valve, brown wire: close valve, dual colors wire: Neutral wire
Package includes:
1 x Brass ball valve

Features:
The motorized ball valve is mainly used for controlling water system of heating ventilation air conditioning.
Made of high quality brass material, the valve is sturdy and durable.
The three wire motorized ball valves offers a unique level of control.
The ball valve is convenient to use and has a stable performance.
Widely used in heating, air conditioning systems, floor heating systems, solar water heater and other systems.
Specification:
Valve Material: Brass
Motor Type: Synchronous motor
Max. Pressure Difference: 1MPa
Nominal Pressure: 1.6MPa
Power: 6W
Suitable Fluid: Cold/hot water or 60% ethyl
Liquid Temperature: 2~95℃
Nominal Diameter: DN20 (/4)
Voltage: AC220V
Weight: Approx.587g/20.7oz
Package list:1 * Motorized Ball Valve

Description:
If your central heating or irrigation sprinkler system isn't working correctly, it could be down to the solenoid valve. Repair a faulty valve with this 220V AC replacement which is suitable for use with pipelines in water, air, gas and low viscosity non-corrosive fluid applications.
Features:
This is a normally close type electric solenoid valve, power on to open it and power off to close it.
The high quality zinc alloy valve body would hold a press up to 0.8Mpa and liquid temperature from -5℃ to 100℃.
Suitable for use with pipelines in water, air, gas and low viscosity non-corrosive fluid applications.
This solenoid valve is designed to installed indoors horizontally in a dry environment. If used outdoors, the coil part should be well protected from water.
Better for intermittent short time work, single continuous power on time is better to be less than 30 minutes.
There is an sign on valve showing flow direction, please follow the sign to connect pipes.
Specifications:
Valve Body: Zinc alloy
Input Voltage: AC220V
Power: 16W
Type: NC(Normally Close)
Pressure: 0-0.8Mpa
Thread Size: 3/4" BSPP (DN20)
Flow Orifice: 20mm
Liquid Temperature: -5℃~100℃
Suitable for: Non-corrosive oil, water, gas, etc
Package Includes:
1 x Solenoid Valve

Features:
This single-phase asynchronous motor controller can be used for 24V, 36V, 90V DC motors.
The controller uses high quality electronic circuit and integrated components for durability.
It has small size, high precision, wide controlling range, low power consumption and long service life.
It is used with single-phase asynchronous motor to realize feedback constant and stepless regulation.
Widely used for governing device drivers of packaging, printing, electronics, instrument meter, clothing machinery, machinery and other industries.
Specifications:
Input Voltage: AC 110V
Control Motor Power: 0.02W~400W
Output Voltage: DC 24V~90V
Size: 11.2*10*6cm/4.4*3.9*2.3in
Package Includes:
1 x Controller

Features:
Valve is made of stainless steel for rust protection and long service life.
Ball valve is durable, performing well after many cycles, and reliable, closing securely even after long periods of disuse.
Ball valve's ease of operation, repair, and versatility lend it to extensive industrial use.
Three-way type, simple to install and convenient to use.
This high quality ball valve would be excellent choices for shutoff and control applications.
Specifications:
Material: Stainless steel 304
Type: Three-way T-type
Nominal Diameter: DN20 (3/4")
Nominal Pressure: PN1.6, 2.5, 4.0, 6.4MPa
Strength Testing Pressure: PT2.4,3.8,6.0,9.6MPa
Low Pressure Hermetic Testing Pressure: 0.6MPa
Suitable Fluid: Q11F-(16-64) water, oil, steam;Q11F-(16-64)P Nitric Acid;Q11F-(16-64)R Acetic Acid
Suitable Temperature: -20℃~200℃
Size: 8.5*6.2cm/3.3*2.4in
Quantity: 1
Weight: 653g(approx.)
Package Includes:
1 x Ball Valve

Features:
This is a check valve that allows water to flow through it in only one direction.
Made of high quality brass material, this check valve is durable and sturdy.
It is normally used for water, nominal pressure is 232psi.
DN50 standard internal female thread is great for many connections.
Convenient to use and easy to install.
Specification:Material: Brass
Color: Yellow
Connection Form: Thread
Structure Form: Swing type
Nominal Diameter: DN50
Thread: BSP 2"
Suitable Fluid: Water
Pressure: 232PSI
Flow Direction: One-way
Operating Temperature: Normal temperature
Size: Approx. 8.3 x 10cm / 3.2 x 3.9inch
Weight: Approx. 676g / 23.8oz
Package List:
1 x Check Valve
Note: Please allow small size error due to manual measurement. Thanks for your understanding.

Features:
1. Made of high quality aluminum alloy material, durable and long service life.
2. Smooth and burr-free and accurate specifications
3. This is 2 position 5 way foot pressure control valve with stable performance
4. The pipe diameter is G1/4in, easy to install and remove
5. Advanced production process guarantees a continuous and stable life
Specification:
Condition: 100% Brand new
Working Medium: Compressed air
Maximum Working Pressure: 0.8Mpa
Working Temperature: 0~70℃
Pipe Diameter: G1/4in
Main Accessories Material(body): Aluminum alloy
Package List:
1 x Valve

WiFi Smart Water Gas Handle Valve Controller Supports
for Alexa Google Home/Tuya
Feature:1. It is a novel design product with short range, low cost, low power consumption and high reliability.
2. Smart WiFi valves are compatible with for Amazon Alexa and for Google Home assistant, and it can allow you to turn off/on the water valve by voice.
3. It is fully compatible with wireless networks, you can remotely control the valve via your smartphone.
4. It can support timing and detect the leakage condition, which can your life.
5. No pipe is required, and it is easy to install, convenient to use and operate.
6. The mobile app synchronizes the control water valve on or off. The WiFi smart water valve with local distribution function. If you perform an on/off valve during connection to WiFi, the valve can perform scheduled synchronization tasks without WiFi connection.
7. In order to avoid a power failure, it cann't ba used. There is a manual clutch at the bottom of the device, which allows you to move the lever to close or open the valve.
8. Compatible with water pipe ball valve, electrical switch, manual control, natural gas / liquid / faucet. It is suitable for controlling water valve, gas valve, filling tank, farm irrigation equipment.
Specification:
Condition: 100% Brand New
Item Type: Water Valve Controller
Color: Black
Wireless Protocol: WiFi 2.4GHz
Wireless Range: Maximum 30m/98.4ft (Outdoor)
Valve Pressure:1.6MPA
Valve Specifications: Approx. 1/2in, 3/4in, 1in, 1.25in
Valve Opening Time: 5-10s
Valve Closing Time: 5-10s
Valve-Closing Time: 5-10s
Torque: 30-60kg.cm
Application: for iOS/for Android
Power:DC 12V 1A
Application Valve Type: Handle Valve

Package List:
1 x WiFi Smart Water Valve Controller
1 x Power Supply
1 x Pipe Clamp
1 x Instruction Manual

WiFi Smart Water Gas Handle Valve Controller Supports
for Alexa Google Home/Tuya
Feature:1. It is a novel design product with short range, low cost, low power consumption and high reliability.
2. Smart WiFi valves are compatible with for Amazon Alexa and for Google Home assistant, and it can allow you to turn off/on the water valve by voice.
3. It is fully compatible with wireless networks, you can remotely control the valve via your smartphone.
4. It can support timing and detect the leakage condition, which can your life.
5. No pipe is required, and it is easy to install, convenient to use and operate.
6. The mobile app synchronizes the control water valve on or off. The WiFi smart water valve with local distribution function. If you perform an on/off valve during connection to WiFi, the valve can perform scheduled synchronization tasks without WiFi connection.
7. In order to avoid a power failure, it cann't ba used. There is a manual clutch at the bottom of the device, which allows you to move the lever to close or open the valve.
8. Compatible with water pipe ball valve, electrical switch, manual control, natural gas / liquid / faucet. It is suitable for controlling water valve, gas valve, filling tank, farm irrigation equipment.
Specification:
Condition: 100% Brand New
Item Type: Water Valve Controller
Color: Black
Wireless Protocol: WiFi 2.4GHz
Wireless Range: Maximum 30m/98.4ft (Outdoor)
Valve Pressure:1.6MPA
Valve Specifications: Approx. 1/2in, 3/4in, 1in, 1.25in
Valve Opening Time: 5-10s
Valve Closing Time: 5-10s
Valve-Closing Time: 5-10s
Torque: 30-60kg.cm
Application: for iOS/for Android
Power:DC 12V 1A
Application Valve Type: Handle Valve

Package List:
1 x WiFi Smart Water Valve Controller
1 x Power Supply
1 x Pipe Clamp
1 x Instruction Manual

Sanitary Valve Sanitary Valve Valve For Water Oil 1.5 Inch Lever Type 304
Features:
Made of high quality stainless steel, this valve is durable and rust-resistant.
The pull style handle allows you to set the valve in different positions simply by pulling and turning.
Convenient to use, simply rotate the handle to open or close valve.
It can also be used to control the flow quantity of water.
Sanitary valve is widely food, beer, dairy, beer, pharmaceutical and chemical industries
Specification:
Condition: 100% Brand New
Item Type: Sanitary Valve
Material: Stainless Steel
Diameter: Approx. 38mm / 1.5in
Pressure Environment: 1.6MPA
Temperature Rating (specification): 15°F through 200°F
Suitable for Medium: Water, Oil
Scope of Application: For food, beer, dairy, beer, pharmaceutical and chemical industries
Package List:
1 x Sanitary Valve
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

This product is composed of a brass valve and an actuator, the actuator is driven by a synchronous motor and has a built-in limit switch that will de-energize the valve when it is opened or . It is applicable for the fan coil and water control system of air conditioner.
Features:
1. Forged by high quality brass, the ball valve is durable and reliable.
2. Built-in actuator de-energize the valve when it is opened or , safe and energy-saving.
3. The product occupies little external space and can be installed close to the wall.
4. structure, tight close, no leakage.
5. Mainly used for the fan coil and water control system of air conditioner.
Specification:
Valve Material: Brass
Power Supply: DC 12V
Power: 6W
Thread: DN32 -1/4"
Suitable Medium: Cold water, hot water or 60% ethanol
Medium Temperature: 2~95℃
Nominal Pressure: 1.6MPa
Allowable Pressure Difference: 1MPa
Wiring Method:
Double Color Wire(SR): Neutral line,
Blue Wire (BL): Open valve,
Brown Wire (BR): Close valve
Weight: 795g/28.0oz
Package list:
1 * Motorized Ball Valve

Valves QA61F‑DN20‑25C 200℃ Ball Valve for Commercial Plumbing Irrigation
Feature:1. One‑piece molding without burrs, smoothly and smoothly installation.
2. Use 20# steel pipe, coated with anti‑corrosion paint, anti‑corrosion and oxidation resistance.
3. Low temperature resistance, large diameter and large flow rate, greatly improving the scope of application.
4. Great workmanship, perfect replacement for the old one, has a long service life.
5. Convenient to use and with good performance, with small size, easy to carry and store.
Specification:
Item Type: Ball Valve
Material: 20# steel pipe
Model: QA61F-DN20-25C
Color: Blue
Caliber: DN20
Medium: Water, steam
Applicable Temperature: 200℃
Pressure: 2.5Mpa
L: Approx. 230mm / 9.1in
D: Approx. 20mm / 0.8in
D1(A/B): Approx. 26.9mm / 1.1in/25mm / 1in
D2: Approx. 48.3mm / 1.9in
H: Approx. 130mm / 5.1in
B: Approx. 170mm / 6.7in
H1: Approx. 48mm / 1.9in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Ball Valve

This product is composed of a brass valve and an actuator, the actuator is driven by a synchronous motor and has a built-in limit switch that will de-energize the valve when it is opened or , safe and energy-saving. It is applicable for the fan coil and water control system of air conditioner.
Features:
1. Forged by high quality brass, the ball valve is durable and reliable.
2. Built-in actuator de-energize the valve when it is opened or , safe and energy-saving.
3. The product occupies little external space and can be installed close to the wall.
4. structure, tight close, no leakage.
5. Mainly used for the fan coil and water control system of air conditioner.
Specification:
Valve Material: Brass
Power Supply: AC 220V
Power: 6W
Thread: DN40 -1/2"
Suitable Medium: Cold water, hot water or 60% ethanol
Medium Temperature: 2~95℃
Nominal Pressure: 1.6MPa
Allowable Pressure Difference: 1MPa
Wiring Method:
Double Color Wire(SR): Neutral line,
Blue Wire (BL): Open valve,
Brown Wire (BR): Close valve
Weight: 1018g/35.9oz
Package list:
1 * Motorized Ball Valve

Descriptions:
This product consists of a ball valve and an actuator, the actuator is driven by a synchronous motor and has a built-in limit switch that allows the valve to be de-energized when fully closed or fully closed. Can be used in air conditioning system and plumbing systems.
Features:
This motorized ball valve is mainly adopted of brass forging, reliable and durable.
Low noise, running noise less than 40dB.
Ball valve and actuator for nut connection Installation, quick disassembly.
Precision structure, close tightly, no leakage.
Can be used in air conditioning system and plumbing systems.
Specifications:Body material: brass
Working temperature: normal temperature
Working medium: water, oil, air
Nominal pressure: 1.6MPa
Connection: thread
Size: G1-1/2" DN40
Weight: 958g
Wiring diagram:
Package Included:
1 x motorized ball valve with cable

This product is composed of a brass valve and an actuator, the actuator is driven by a synchronous motor and has a built-in limit switch that will de-energize the valve when it is opened or . It is applicable for the fan coil and water control system of air conditioner.
Features:
1. Forged by high quality brass, the ball valve is durable and reliable.
2. Built-in actuator de-energize the valve when it is opened or , safe and energy-saving.
3. The product occupies little external space and can be installed close to the wall.
4. structure, tight close, no leakage.
5. Mainly used for the fan coil and water control system of air conditioner.
Specification:
Valve Material: Brass
Power Supply: DC 24V
Power: 6W
Thread: DN40 -1/2"
Suitable Medium: Cold water, hot water or 60% ethanol
Medium Temperature: 2~95℃
Nominal Pressure: 1.6MPa
Allowable Pressure Difference: 1MPa
Wiring Method:
Double Color Wire(SR): Neutral line,
Blue Wire (BL): Open valve,
Brown Wire (BR): Close valve
Weight: 928g/32.7oz
Package list:
1 * Motorized Ball Valve

Feature:1. The is , beautiful and practical, which is suitable for most conical fermentation tanks.
2. Adopts double O-ring, with good sealing performance, no leakage.
3. Perfect fermenter accessories, easy to install and replace, can directly replace old or damaged parts.
4. This product is made of high quality 304 stainless steel. It is durable, corrosion-resistant and can be used for a long time.
5. Exquisite workmanship, stable performance, high security, can be used at ease.
Specification:
Condition: 100% Brand New
Item Type: Fermenter Accessory
Material: Stainless Steel
Weight: Approx. 414g / 14.6oz
Top Hole Diameter: Approx. 3.8cm / 1.5in
Total Length: Approx. 21cm / 8.3in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Fermenter Accessory
Note:
1.Please allow 0-1 inch error due to manual measurement. Thanks for your understanding.
2.Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.