Elektromos motorok

Features:1. Most popular model equipped with 1.8 degree step angle.
2. Specially designed and suitable for Printers.
3. Low noise and high quality.
4. Bipolar 4-wire: Black A , Green A-, Red B , Blue B-.
5. It has a quite stable performance during work and will not loss step.
Specifications:Compatible With: for Printer
Type: Stepping Motor.
Model Number: 42BYGH34
Rated Power: 5W
Rated Voltage: 12V
Rated : 0.3NM
3C Rated Voltage Range: DC 36V below
Number of Leads: 4
Wire Color: Black(A ), Green(A-), Red(B ), Blue(B-)
Wire Length: Approx. 1m / 3.3ft
Size: About 42 x 42 x 65mm / 1.7 x 1.7 x 2.6in
Weight: About 247g
ItemCapability
Step Angle1.8°
Maximum Temperature Rise80℃
Environment Temperature-20℃~ 50℃
Insulation Resistance100 MΩMin. ,500VDC
Electric Strength500VAC for 1minute
Maximum Radial Clearance0.02 (450g-load)
Maximum Axial Clearance0.08 (450g-load)
Maximum Radial Pressure75N (20mm from the flange)
Maximum Axial Pressure15N
Package List:1 x 4-lead Stepper Motor for Printer
Warning:Make sure the motor connect to a constant current or chopper drive controller before you test motor. Connecting the motor directly to a power supply will destroy the motor.

Feature:1. Can replace 4: 1 worm gear, provide more torsion or slower output speed
2. The device reduces the chance of reverse drive to almost 0
3. The product is made of bronze worm gear wheel and metal shaft, durable and long service life
4. Simple structure, easy to install and remove
5. High quality and great processing, good accessories for industrial robot
Specification:
Item Type: Worm Gear
Gear Ratio: 20: 1
Material: Bronze worm gear wheel, metal shaft
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Worm Gear Wheel
1 x Shaft
Note:Worm gear wheel mounted on 4.7mm D-shaft diameter, worm gear shasft mounted on 6mm or 4.7mm D-type shaft

DC Brush Motor High Power Low Noise Ball Bearing Motor 12V 60W Miniature Speed
Features:
This is a micro DC motor double ball shaft of low noise.
The shaft is used for car wash pump, sprayer, power tools.
The rated rotation speed is up to 5000r/min,more practical.
Delicate and practical design makes the shaft more durable and strong.
Stable and outstanding performance ,very reliable in use.
Specification:Rated Power: 60W
Type:DC Brush Motor
Rated Voltage: 12V
Rated Current: 2.05A
Rated Speed:5000r/m
Length: 70.5mm / 2.78in
3C Rated Voltage Range:<=DC 36V
Package List:1 x Motor Ball Bearing

Descriptions:
Electric motor gear box is suitable for: , remote control and motorcycles, ATV, karting, child vehicles and other modifications.features high , low noise, and wear-resisting. It is a good choice to replace the broken one.
Features:
Suitable for: , remote control and motorcycles, ATV, karting, child vehicles and other modifications.
electric car rear motor gear box special use part spare part replacement.
Drive motor gearbox for rear-wheel drive( for six plum ).
This gearbox middle gear is metal, and with heat dissipation vane.
This gearbox features high , low noise, and wear-resisting.
Specifications:
Size:Length:Approx. 18.5cm/7.3in
Diameter:Approx. 3.6cm/1.4in
Model(Optional): 6V 20000RPM, 12V 30000RPM
Motor power: 35 W
Weight: 490g, 485g
Package Included:
1 x gearbox
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Descriptions:
Electric motor gear box is suitable for: , remote control and motorcycles, ATV, karting, child vehicles and other modifications.features high , low noise, and wear-resisting. It is a good choice to replace the broken one.
Features:
Suitable for: , remote control and motorcycles, ATV, karting, child vehicles and other modifications.
electric car rear motor gear box special use part spare part replacement.
Drive motor gearbox for rear-wheel drive( for six plum ).
This gearbox middle gear is metal, and with heat dissipation vane.
This gearbox features high , low noise, and wear-resisting.
Specifications:
Size:Length:Approx. 18.5cm/7.3in
Diameter:Approx. 3.6cm/1.4in
Model(Optional): 6V 20000RPM, 12V 30000RPM
Motor power: 35 W
Weight: 490g, 485g
Package Included:
1 x gearbox
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Features:
The NEMA 23 motor mounting plate is designed for easy modular connection of NEMA 23 stepper motors.
You can also combine this plate with the V Slot gantry to form a great belt and pinion system.
High quality material, anti-friction and high temperature resistance.
Level performance enhancement, healthy 3D printing.
Installation is simple but stable, 100% brand new.
Light weight and easy to carry.
Specification:6063 - T6 board
Thickness: 3mm thick
Material: Anodized aluminum
Colour: Black
Size: approx. 9.6 * 5.9 * 0.3cm / 3.8 * 2.3 * 0.1in
Package list:1 * Mounting Plate

Features:
This is a great electric motor gearbox used for children's .
The middle gear is made of metal which is more sturdy and durable.
It will make quite low noise and more wear-resistant.
There are many types for different voltage and that you can choose as need.
It will be a great replacement part for your broken or old ones.
Specifications:
Type(Optional): 6V12000RPM, 12V23000RPM, 12V18000RPM, 12V8000RPM,
6V10000RPM, 6V8000RPM, 12V20000RPM, 6V15000RPM
Hole Inner Diameter: 1.2cm/0.5in
Quantity: 1
Weight: 483g~515g(approx.)
Package Includes:
1 x Electric Motor Gearbox

This Spindle Motor Clamp adopts all-sandblasting process, the appearance is beautiful, doesn't need the second spray plastic treatment. Elaborate design, not easy slide wire, and easy to remove. Seismic capability, with long service life.
Features:
All-sandblasting process, the appearance is beautiful, doesn't need the second spray plastic treatment.
Elaborate design, not easy slide wire, and easy to remove.
Aluminum clamper, with higher , not easy to deform.
Seismic capability, with long service life.
Unique slot design, easy to lock, high - , non-slip teeth.
Specification:Material: Aluminum
Inner diameter : 52mm / 2.05in
Product features: sandblasting treatment, anti-skid design
Weight: Approx. 354g
Package list:1 x Spindle Motor Clamp
4 x Screws

Motore brushless modello piatto facile da installare utilizzare motore brushless
Features:
· Brushless motor for RC fixed-wing airplane model.
· Support 3S, 4S&up to 2kg thrust (4S).
· 1000KV, 1400KV optional for different requirements.
· Convenient use - easy to install&simple operation.
· Long lifespan - high class material&tested&qualified.
Specifications:
Product name: Brushless Motor 2814 for Fixed-wing RC Plane Model
KV: 1400KV
Support: 3S, 4S
MAX thrust: 2020g (4S)
Weight: Approx 115g/4.1oz
Size: Approx 2.8*2.8*1.4cm/1.1*1.1*0.6inch (L * W * H)
Motor
Propeller Blade
Voltage(V)
MAX Current
MAX Thrust
2814-1400KV
HY 1060
12.4V(3S)
30A
1430g
14.8V(4S)
38A
1900g
HY 1160
12.4V(3S)
34A
1570g
14.8V(4S)
43A
2020g
Package list:
1 * Motor
1 * Motor Base
1 * Bag of Accessories
Note:
Max 2kg thrust(4S), but a single accelerator should not exceed maximum 10 seconds.
The motor is equipped with cross, only need to lock 2 screws.
Properly weld motor 4.0mm banana plug, recommend use 50A ESC or higher.

Ball Bearing SCS30LUU Ball Bearing 56mm Aluminum Linear Linear Sliding Linear
Features:1. 100% brand new and high quality
2. The is of oxidation treatment, beautiful and corrosion resistant
3. Made of aluminum alloy material, bearing capacity
4. Prevent dust from entering and extend service life
5. Suitable for high speed silent high equipment
Specification:Condition: 100% Brand New
Model: SCS30LUU
Height: 56 (mm)
Inner Diameter: 30 (mm)
Uses: Transmission
Lubricant : Oil Lubrication
Oil Lubrication Method: Drip Lubrication
Weight: Approx. 1355g / 47.8oz
Package List:1 * Linear Ball Bearing

Feature:1. Pure copper coil has excellent electric conductivity, making the power output of the motor stable and .
2. Metal gearbox delivers stable transmission, large and wear resistance.
3. Hall encoder has three layers of high density molecular coating to effectively prevent dust, longer service life.
4. Simple structure, easy to install and use.
5. Applicable to smart home appliance, medical equipment, smart robot, industrial area, etc.
Specification:
Item Type: DC Geared Motor
Rated Voltage: DC 24V
Rated Current: 0.17A
Rated Power: 37W
Speed: 330RPM
Maximum : 0.7kg.cm
Cable Length: 23.7cm/9.33in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Motor

B10
Features:
100% brand new and high quality.
Made of sturdy metal, the spindle is durable and has good performance.
Spindle is processed with grinding machine for high precision of 0.005mm.
Convenient to use, chuck capacity is 0.6-6mm.
Great part to DIY drill press, table grinder, table saws and so on.
Specifications:
Model: ZJZ01012
Rated Speed: 7000rpm
Max. Speed Temperature Rise: 60℃
Dynamic Balance: 0.1mg
Max. Speed Noise: 2db
Cone Hole Runout: 0.001mm
Precision: 0.005mm
Chuck Capacity: 0.6-6mm
Weight: 325g(approx.)
JTO
Features:
100% brand new and high quality.
Made of sturdy metal, the spindle is durable and has good performance.
Spindle is processed with grinding machine for high precision of 0.005mm.
Convenient to use, chuck capacity is 0.3-4mm.
Great part to DIY drill press, table grinder, table saws and so on.
Specifications:
Model: ZJZ01012
Rated Speed: 7000rpm
Max. Speed Temperature Rise: 60℃
Dynamic Balance: 0.1mg
Max. Speed Noise: 2db
Cone Hole Runout: 0.001mm
Precision: 0.005mm
Chuck Capacity: 0.3-4mm
Weight: 312g(approx.)
Package Includes:
1 x Spindle
Note: Please allow small size error due to manual measurement. Thanks for your understanding.

Feature:1. The circuit board and stepper motor are installed and debugged, and plug and play.
2. High- printing does not lose steps, low heat, high efficiency, and more stable.
3. With SMT32 chip, the frequency is higher and the processing is faster. The structure is simple and easy to install.
4. For MKS SERVO42B -loop motor is a product independently developed by the maker base to meet market demand.
5. The -loop motor feeds back the rotation angle of the stepping motor to the drive circuit to detect whether each step of the step is gone, just to prevent lost steps.
6. The loop motor is feedback. If there is a lost step, the -loop motor will be replenished by the feedback.
7. Suitable for printer manufacturers with high precision in mass production.
Specification:
Item Type: Printer Accessories
Input Voltage: 12V- 24V
Peak Output Current: 10 2A
Loop Feedback Frequency: 6kHz
Accuracy: Above 0.1125 Degrees
Subdivision Steps: 16, 32, 64, 128, 256 (Default is 16 Subdivisions)
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:
1 x Stepper Motor
1 x 6pin Long Line
1 x 6pin Short Line
1 x Module

Feature:
1. Close loop motor can be easy to install and adjust parameters, which makes motherboards work in high performance.
2. Supports low heat generation, high efficiency and stability, such electric motor can be used with confidence.
3. This kind of motherboard motor is suitable for MKS / SKR motherboards with high practicality.
4. Adopts 12V‑24V input voltage and 2A output current, such close loop motor adopts 6kHz rated frequency.
5. With alloy material, stepper motor's installation is simple, which not requires particularly complicated operations.
Specification:
Item Type: Close loop motor
Input Voltage: 12V-24V
Output Current: 2A
Material: Alloy
Rated Frequency: 6kHz
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x Motor
1 x Motherboard Adapter
1 x Cable
1 x LED Display
1 x Connecting Cable

Feature:1. Made of high quality 40cr alloy steel material, which can withstand pressure and explosion
2. Using strict quality control and quality assurance to guarantee a long service life
3. High accuracy ER32‑UM chuck allow you to choose according to your needs
4. Using excellent workmanship to bring a , which will not hurt your hands in operate
5. This collet chuck toolholder is suitable for milling and lathe accessories
Specification:
Item Type: CNC toolholder
Model: BT30-ER32-100
Clamping Range: Approx. 2 ~ 20mm / 0.1 ~ 0.8in(ER32)
Length of L Part: Approx. 100mm / 3.9in
Material: 40cr alloy steel
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x CNC Toolholder

Descriptions:
This Motor Mount Clamp adopt all-sandblasting process, the appearance is beautiful, need not the second spray plastic treatment. Elaborate design, not easy slide wire, and easy to remove. Seismic capability, with long service life.
Features:
All-sandblasting process, the appearance is beautiful, need not the second spray plastic treatment.
Elaborate design, not easy slide wire, and easy to remove.
Cast aluminum clamper, with higher , not easy to deform.
Seismic capability, with long service life.
Unique slot design, easy to lock, high - , non-slip teeth
Specification:
Inner diameter : 80mm/100mm
Power supply voltage: no
Rated voltage: AC single phase and DC 50V and below
Material: cast aluminum
Product features: sandblasting treatment, anti-skid design
Weight:1027g, 1490g
Package Included:
1 x Spindle Motor Clamp
3 x screws

Features:
Easy to install - Integrates the powerful features of the Mega2560 Ramps1.4 kit, greatly reducing wiring problems, making connections more convenient and more stable.
Easy to use - Motherboard supports LCD2004 and LCD12864, no need to use adapter, motherboard power supply.
Good compatibility - The firmware can use the same configuration as ramps1.4. The marlin firmware running in the Mega2560 ramps 1.4 kit can run directly on the mainboard.
Wide voltage input range, short circuit protection - Useing DC-DC step-down design and regenerative fuse for short circuit protection, which improves the MEGA2560 board's severe heating problem and allows any power supply of 10V-30V.
Supports up to 5 motor drives - Supports A4988 / DRV8825 / TMC2100 drives, motor drive circuits are not integrated on the board. You can replace any stepper motor drive you need to make it easier to operate.
Rich expansion port - Motherboard reserves SERVO, UART, IIC extension, so you can use it to achieve automatic leveling, control touch screen intelligent controller, control wireless module and interrupt detection.
Wide applicability - widely used in 3D printers, such as for Kossel/Prusa i3/corexy, etc.
Specification:Main control chip: ATMEGA256016AU
Input power: 10V~30V
Standby current: 35mA ± 5mA
Stepper motor driver: 5 channels maximum
Hot bed output control: 1 channel
Heating output control: 2 channels
Undercurrent output control: 3 channels
This is an integrated motherboard that integrates the power of the Mega2560 Ramps1.4 with more advanced features; the streamlined interface effectively avoids the unnecessary hassle and power consumption of the Ramps 1.4 Mega2560. It is a feature-rich, all-in-one electronic solution for Mendel/Prusa and other CNC equipment.
Package list:1 * Mainboard
1 * USB Cable

Feature:1. This product is a small brush motor, made of premium aluminum material.
2. With metal belt pulley, strong, durable for long time use.
3. The motor length of 100mm is 68mm in diameter, the shaft length is 28mm, the shaft diameter is 8mm, the distance between the 2 fixed holes of the motor is 36mm, and the sprocket wheel is the 9 teeth sprocket wheel of the 25H model.
4. The shaft diameter: 8mm (single milling slot 1mm).
5. Suitable for electric scooter, electric bicycle, etc.
Specification:
Condition: 100% Brand New
Item Type: Brushed Motor
Model: MY6812
Material: aluminum
Color: as picture shown
Rated power: 120W (kW)
Rated voltage: 12 (V)
Main application: scooter, electric vehicle
Rated voltage range of 3C: below 36V DC
Rated current: <8, 5A
Rated speed (RPM) : 2500±5%
Maximum speed (RPM) : 3500±5%
No-load current: < 0.9A
Rated torque: 0.56 nm
Transmission: belt pulley, metal
Shaft diameter: 8mm (single milling slot 1mm)
Efficiency: > 68%
Motor length: 100mm/3.9inch
Motor diameter: 68mm/2.7inch
Shaft diameter: 8mm/0.3inch
Motor fixed holes distance: 36mm/1.4inch
Sprocket: 25H 9 teeth sprocket
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:1 x Brushed Motor

Features:
1. 100% brand new and high quality
2. Made of auminum alloy material, durable to use.
3. Small body and stable performance.
4. High speed and can provide enough power
5. Suitable for multi-purpose micro-machine tools
Specification:
Condition: 100% Brand New
Model: Z004MTS
Material: Auminum Alloy
Voltage: 12V
Current: 5A
Power: 60W
Speed: 12800rpm
Weight: Approx. 800g / 28.2oz
Package List:
1 * Motor Gearbox

Features:
Made of high quality aluminum alloy, high strength, durable and reliable.
Compact size, no scratch, superior performance.
Not easy to rust, wear-resistance and corrosion-resistance.
High dimensional, more stable.
Mounting screws are included, easy to use.
Specification:Material: Aluminum Alloy
Weight: 927g/32.7oz
Diameter: 80mm/3.1inch
Package List:1* CNC Motor Bracket
4* Screws

Feature:1. This product is small DC brush motor.
2. Made of high quality aluminium material, good performance, stable, long service time.
3. With metal belt pulley, fine workmanship, sturdy and durable.
4. Motor length is 100mm, diameter is 68mm, shaft length is 28mm, shaft diameter is 8mm, 2 fixed hole spacing of motor is 36mm, sprocket is 25H type, 9 tooth sprocket.
5. Suitable for electric scooters, electric bicycles, etc.
Specification:
Item type: DC Brush Motor
Model: ZY6812
Material: aluminium
Color: black
Weight: Approx. 1368g
Rated power: 120W (kW)
Rated voltage: 12 (V)
Rated speed: 3500 (rpm)
Main scope of application: electric scooter, electric bike
3C rated voltage range: below DC 36V
Rated current: <8.5A
Rated speed (rpm): 2500 ± 5%
Maximum speed (rpm): 3500 ± 5%
No-load current: <0.9A
Rated torque: 0.56 torque
Transmission: belt pulley, metal
Axial diameter: Approx. 8mm/0.3in(one side milling groove: Approx. 1mm/0.04in)
Efficiency: > 68%
Motor length: Approx.100 mm/ 3.9 inches
Motor diameter: Approx. 68 mm/ 2.7 in
Axial diameter: Approx. 8 mm/ 0.3 in
Motor fixed hole distance: Approx. 36mm/ 1.4in
Sprocket: 25H 9 teeth sprocket
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Motor

Features:1. Its is 500mN.m.
2. Made of superior materials, which are eco-friendly and durable for long term use.
3. High performance ensures better work efficiency.
4. With fine workmanship, it has compact structure and long service life.
5. Motor with unique provides operation and strong power.
Specification:Condition: 100% Brand New
Material: Stainless Steel
Color: Silver
Diameter: Approx. 52mm / 2.05inch
Weight: Approx. 881g
Working Voltage: 12-48VDC
Power: 400W: 3000-12000r/min (12V-3000rpm, 24V-6000rpm, 36V-9000rpm, 48V-12000rpm): 500mN.m
Insulation Resistance: >2 megohms
Insulation Dielectric Strength: 400V
Package List:1 * Spindle Motor

Feature:1. High efficiency, low noise, high torques, low temperature rise and long mileage.
2. Effectively reduce current, enhance battery life and reduce impact on battery
3. Suitable for most of electric scooters.
4. High quality material, provide good usage experience.
5. Professional manufacturing, stable performance and high reliability.
Specification:
Condition: 100% Brand New
Item Type: Footless High Speed Motor
Material: metal
Color: As picture shown
Product Size: Approx. 12x10cm/4.7x3.9in
Weight: Approx. 1765g
Rated speed / RPM: 2700
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Footless High Speed Motor

200Kpps YKD2405M 57 Step Motor for Construction Machinery Engineering Vehicles
Features:
1. A new generation of 32-bit digital signal processing control technology, high cost performance, good stability, excellent noise and vibration performance
2. With 16-speed equal-angle constant torsion subdivision, up to 200 subdivisions
3. The current control is smooth and precise, and the motor heat is small.
4. The highest impulse response frequency can 200Kpps
5. When the step pulse stops for more than 200ms, the motor current is halved.
6. Excellent smoothness in low frequency subdivision
7. Opto-isolated differential signal input and strong anti-interference ability
8. The effective value of the drive current is adjustable below 4A.
9. Mainly used in dispensing machines, engraving machines, equipment, labeling machines, electronic equipment, advertising equipment and other automation equipment.
Specification:
Condition: 100% Brand new
Voltage Range: DC20-50V
Package List:
1 x Step Drive Motor

Motore passo-passo 2 fasi Nema 17 1.8 ° 0.65N.M con Driver Pulse Control 12-24V
Feature:1. Stepper motor and its driver integration, stepper motor set.
2. Compact and lightweight designed for efficient automation.
3. Integrated designed, no required for external motor cable, encoder cable, driver.
4. Achieve simplified system structure, save space and reduce interference.
5. Low vibration, low noise, low temperature rise, long service life.
Specification:
Item Type: Stepper Motor
Step Angle: 1.8°
Holding Torsion: 0.65N.M
Driving Voltage: DC 12-24V
Current Range: 0.5-2.2A
Phase Number: 2 Phase
The Highest Segment: 12800 Steps / Turn
Control Method: Pulse Control
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x Stepper Motor
1 x Signal Line
Note:
1. When the driver is powered on, the indicator PWR is on. When the drive is powered off or the drive is faulty, the light is off.
2. Do not reverse the power supply. Do not exceed the input voltage of DC24V.
3. When installing the motor, it is strictly forbidden to strike the motor shaft and the back cover to avoid damage to the encoder.
4. The input control signal voltage is 5V. When it is higher than 5V, the current limiting resistor needs to be connected. When the control signal voltage is 24V, it is necessary to connect 2.2K 1/4 resistors in series.

Features:
100% brand new aftermarket replacement Reduction Motor.
Adopted metal gear materials, wear-resistant and long service life.
Using high-quality materials with great glossiness, simple and generous.
Reliable characteristics and stable running.
It is suitabe for most type of bike.
Specification:Condition: 100% Brand New
Material: Metal
Color: As Picture Shown
No Load Current: 2.5A
Rated Output Power: 250W
Rated : 3000rpm
Rated : 0.80N.m
Rated Current: 13.4A
Efficiency: 78%
Reduction Ratio: 9.78:1
Package Size: 15 * 15 * 15cm/5.9 * 5.9 * 5.9in
Package Weight: Approx. 2454g/86.6oz
Package List:1 * Reduction Motor

Descriptions:
The worm gear reducer is designed and manufactured according to the technical quality standard of Q/MD1-2000. In accord with the national standard worm wheel parameters based on GB10085-88, the worm gear and worm reducer absorb domestic and foreign advanced technology, unique and novel box structure, the beautiful appearance is made of high quality aluminum alloy die casting.
Features:
Compact mechanical structure, small and efficient.
Good heat exchange performance, quick heat dissipation.
Easy to install, flexible, superior performance, easy maintenance.
With larger transmission ratio, large torque, high load capacity.
Stable operation, small noise and durable.
Strong applicability, safety and reliability.
It is widely used in metallurgy, mining, transportation, water conservancy, chemical industry, food, beverage, textile, tobacco, packaging, environmental protection and other industries and fields.
Specifications:
Type: worm gear reducer.
Purpose: speed reducer
Model: NMRV40
Input speed :1400 RPM (RPM)
Rated power: 0.09-15 KW
Allowable torque: 2.6-1760N.M
Size: as the picture
Weight:2242g
Package Included:
1 x worm gear reduce
4 x screw
4 x spring washers
4 x nut
1 x vent cap

Motore passo-passo digitale NEMA 23 controllo vettoriale anello chiuso DC 24-48V
Features:
1. Advanced 32-bit motor control dedicated digital signal processing chip and vector closed-loop control technology
2. The default work is in closed loop mode, no loss of step, and also supports working in open loop mode.
3. Improve the output torsion and running speed of the motor
4. The current level is adjusted according to the load intelligently, which reduces the temperature rise of the motor, locks the current, and does not change the maximal current.
5. Adapt to various mechanical load conditions, no need to adjust the gain parameters
6. The position command smoothing filter can be set, the motor runs smoother, the vibration is lighter, and the acceleration and deceleration dynamic performance is higher.
7. 0-speed static capability without vibration after positioning
8. Support single and double pulse input, pulse response frequency up to 200KHZ
9. Support 15 fixed subdivisions and support software to set arbitrary subdivisions
10. Position and speed controlled by communication mode
11. Support monitoring of motor running state, including speed, position deviation, bus voltage, operating voltage, etc.
12. With overcurrent, overvoltage, position over tolerance protection
13. Suitable for all kinds of small and medium-sized automation equipment, such as industrial robots, CNC machine tools, engraving machines and automatic assembly equipment, etc.
Specification:
Condition: 100% Brand new
Item Type: Stepping Motor
Power Supply: DC24-48V (recommended power supply 36V)
Output Current: 6A
Pulse Frequency: 0-200KHz
Encoder Line Number: 1000
Package List:
1 x Stepping Motor

Integrated Servo Motor IHSS42-24-07 Integrated Servo Motor 24V 0.7Nm
Features:
2 in 1 motor and driver, saving space.
Full loop, precise position and speed control for demanding application requirements.
High resolution encoder provides precise positional accuracy.
Double pulse control, and precise.
Stable performance, low heat, high efficiency.
Specification:
Model: iHSS42-24-07
Rated voltage: 24V
Current: 1.2A
Number of Phase: 2 phase
: 0.7NM
Encoder line: 1000 lines
Package list:
1 * Integrated Servo Motor

Features:
The worm gear motor with self-locking, even if in the absence of electricity in the motor, the output shaft is not to move, that is self-locking
This motor is adopted of pure copper wire coil, with low heat and low loss.
The motor is made of metal gear, wear-resisting, avoid tooth breaking, so with long serving life.
Easy installation, flexible and easy, superior performance, easy maintenance
Worm gear motors widely used in , a door opener, mini winches and other
Specification:
Model: 5D90GN-RV30
Number of poles: 8
Rated power: 90W
Rated voltage: 24 (V): 1800rpm
Current: 4A
Reduction ratio(Optional):5k, 7.5k,10k,15k, 20k, 25k, 30k, , 50k, 60k, 80k
Size: as the picture shows
Weight: Approx.2635g/92.9oz
Wiring method: red:" ", :"-"
Motor characteristics Voltage Power unload parameter load parameter
5D90-24
current moment of force current
V W RPM A RPM kgf.cm A
24 90 2200 1.75 185 3.4 12
Allowable moment of force on gearbox
Model Reduction ratio
5 7.5 10 15 20 25 30 40 50 60 80
output shaft r/min 440 293 220 146 110 88 73 55 44 36 27
NRV30 moment of force
N.m 1.27 1.9 2.38 3.44 4.3 6.19 6.88 10.31 12.89 13.83 18.44
kgf.cm 13 19 24 35 44 63 70 105 132 141 188
Package list:
1 x Worm Gear Motor
4 x screw kit
Note: If the reduction ratio is different, the output shaft is different.
Motor 1800/ Reduction ratio=output shaft

Feature:1. Pure copper motor with long-lasting service time.
2. High efficiency, low noise, high torques, low temperature rise, long driving mileage.
3. Easy to use, high quality motor, simple usage.
4. High quality material, provide good usage experience.
5. Professional manufacturing, stable performance and high reliability.
Specification:
Condition: 100% Brand New
Item Type: Geared Motor
Material: metal
Color: As picture shown
Weight: Approx. 2688g
Rated speed: 2950 rpm
Reduction ratio: 8.9
Pure copper wire, high-quality carbon brush bracket, high-quality carbon brush, thickened wire, more mute, more durable
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Motor

Feature:1. Pure copper motor with long-lasting service time.
2. High efficiency, low noise, high torques, low temperature rise, long driving mileage.
3. Easy to use, high quality motor, simple usage.
4. High quality material, provide good usage experience.
5. Professional manufacturing, stable performance and high reliability.
Specification:
Condition: 100% Brand New
Item Type: Geared Motor
Material: metal
Color: As picture shown
Weight: Approx. 2676g
Rated speed: 2950 rpm
Reduction ratio: 8.9
Pure copper wire, high-quality carbon brush bracket, high-quality carbon brush, thickened wire, more mute, more durable
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Motor

Features:
1. High accuracy positioning, no losing step.
2. 100% rated output torque.
3. Variable current drive technology, high current efficiency.
4. Low vibration, low noise, smooth and stable running at low speed.
5. Compact integrated size, saving mounting space.
6. User defined micro steps.
7. Over current, over voltage and over position protection functions.
8. Application for various automation equipment such as CNC, printing, textile machine, etc.
Specification:
Model: IHSS60-36-30-31
Input voltage: 20-50VDC (36V typical value)
Output shaft diameter: 8mm
Torque: 3Nm
Maximum pulse frequency: 200K
Default communication rate: 57.6Kbps
Continuous current: 4A
Package weight: Approx. 1611g/56.8oz
Package List:
1 * 57 Stepper Motor
1 * Stepper Motor Driver

750W 7N·M 200〜4000rpm Servomotore Brushless per macchina da cucire Industriale
Feature:1. Adopts split design, which is convenient for users to install and simple.
2. Efficient energy-saving, quick start and stop, there is no idle energy consumption phenomenon, saves 60% - 75% energy than the same power mechanical motor.
3. The motor has the function of automatic needle stop. It can set the automatic needle stop position to improve sewing efficiency.
4. The utility model has the advantages of simple structure, small size and light weight, and is one third of the weight of the motor of the same power mechanical motor.
5. Brushless design, long-term use without replacing any parts, maintenance-free, long life, stable performance, safety and reliability.
6. The motor speed is continuously adjustable and the output torsion is large, which can meet the needs of various sewing equipment.
7. Low noise, less heat, less interference to other external electronic equipment during operation.
Specification:
Item Type:Item Type:Sewing Machine Motor
Material:Metal
Power:750W
Rotation Speed:200~4000rpm
Maximum Torsion: 7N·M
Frequency: 50/60Hz
Current: 0-3A
Application:Industrial, household, high-head, double-needle, flat sewing machine, seaming, electric sewing machines are available.
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:
1 x Motor
1 x Motor Control Box
1 x Pedal
1 Pair of Pedal Connection Rod
3 x Installation Bolt
3 x Hex Nut
3 x Flat Washer
3 x Spring Washer
3 x Line Pressing Fasteners
1 Pair of Self Tapping Screw
2 x Small Self Tapping Screw
1 x Users Manual

Feature:1. The DC motor is equipped with a reduction box, which can meet your needs according to the reduction ratio.
2. This motor runs stably, the output speed is stable, and it can provide a stable source of power.
3. The motor body is made of stainless steel, which is not easy to be damaged by corrosion.
4. With great workmanship, this motor can perfect replacement for the old one.
5. Small size, easy to carry and store, convenient to use and with good performance.
Specification:
Item Type: Worm Gear Motor
Material: Stainless steel
Power: 90W
Current: 11A, 5.5A
Speed: 2200 r/min
Size: Approx. 56mm / 2.2in
92mm / 3.6in
80mm / 3.1in
90mm / 3.5in
10mm / 0.4in
122mm / 4.8in
71mm / 2.8in
100mm / 3.9in
Motor Speed(r/min) Reduction Ratio Output Speed(r/min)
22005440
22007.5293.3333333
220010220
220015146.6666667
220020110
22002588
22003073.33333333
22004055
22005044
22006036.66666667
22008027.5
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x Motor
1 x Worm Gear Reducer
1 x Rubber Band
1 x Accessory Package

Feature:1. The DC motor is equipped with a reduction box, which can meet your needs according to the reduction ratio.
2. This motor runs stably, the output speed is stable, and it can provide a stable source of power.
3. The motor body is made of stainless steel, which is not easy to be damaged by corrosion.
4. With great workmanship, this motor can perfect replacement for the old one.
5. Small size, easy to carry and store, convenient to use and with good performance.
Specification:
Item Type: Worm Gear Motor
Material: Stainless steel
Power: 90W
Current: 11A, 5.5A
Speed: 2200 r/min
Size: Approx. 56mm / 2.2in
92mm / 3.6in
80mm / 3.1in
90mm / 3.5in
10mm / 0.4in
122mm / 4.8in
71mm / 2.8in
100mm / 3.9in
Motor Speed(r/min) Reduction Ratio Output Speed(r/min)
22005440
22007.5293.3333333
220010220
220015146.6666667
220020110
22002588
22003073.33333333
22004055
22005044
22006036.66666667
22008027.5
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x Motor
1 x Worm Gear Reducer
1 x Rubber Band
1 x Accessory Package

Product Description
1.8 Degree 42mm NEMA17 2 Phase 4-wire Stepper Motor For 3D Printer or CNC
Features:
100% brand new and high quality
2 phase NEMA17 42mm 4-wire stepper motor
Fits for 3D printers, monitor equipment, medical machinery, textile machinery,
packaging machinery, stage lighting and so on .
Wiring: Black Green A , A- red and Blue B , B-,.
Adapter Drive JK0220 (drive voltage DC12V 36V, AC12V 24V, current range 0.3A 2.0A).
Specifications
Model: JK42HS40-1704
phase : 2
Material: Metal
Color: As picture shows
Size: 42*42*40 mm
Rated voltage: 12-24V
Power: 5W
Current: 1.7A
Rated Speed: 0-1500 RPM
Rated torque: 0.42 NM
Step angel:1.8°
Temp. rise: max 80 ℃
Ambient temp.: -20 ℃ -50 ℃
Insulation resistance:100MΩmin.(500V DC)
Dielectric strength: 500VAC for 1 minute
Shaft Radial Play: 0.02Max. (450g-load)
Shaft Axial Play: 0.08Max. (450g-load)
Max. radial force: 28N (20mm from the flange)
Max. axial force: 10N
Electrical specification
Motor length: 40 (L) mm,34(L)mm,48(L)mm
Rated current:1.68A
Resistence per phase:1.5Ω
Inductance per phase:2.3mH
Holding torque:4.2 kg.cm
# of leads No.: 4
Detent torque:150 g.cm
Rotor interia: 54 g.cm
Mass:0.40kg
Package included:
1X 2 Phase 4-Wire Stepper Motor

Product Description
1.8 Degree 42mm NEMA17 2 Phase 4-wire Stepper Motor For 3D Printer or CNC
Features:
100% brand new and high quality
2 phase NEMA17 42mm 4-wire stepper motor
Fits for 3D printers, monitor equipment, medical machinery, textile machinery,
packaging machinery, stage lighting and so on .
Wiring: Black Green A , A- red and Blue B , B-,.
Adapter Drive JK0220 (drive voltage DC12V 36V, AC12V 24V, current range 0.3A 2.0A).
Specifications
Model: JK42HS40-1704
phase : 2
Material: Metal
Color: As picture shows
Size: 42*42*40 mm
Rated voltage: 12-24V
Power: 5W
Current: 1.7A
Rated Speed: 0-1500 RPM
Rated torque: 0.42 NM
Step angel:1.8°
Temp. rise: max 80 ℃
Ambient temp.: -20 ℃ -50 ℃
Insulation resistance:100MΩmin.(500V DC)
Dielectric strength: 500VAC for 1 minute
Shaft Radial Play: 0.02Max. (450g-load)
Shaft Axial Play: 0.08Max. (450g-load)
Max. radial force: 28N (20mm from the flange)
Max. axial force: 10N
Electrical specification
Motor length: 40 (L) mm,34(L)mm,48(L)mm
Rated current:1.68A
Resistence per phase:1.5Ω
Inductance per phase:2.3mH
Holding torque:4.2 kg.cm
# of leads No.: 4
Detent torque:150 g.cm
Rotor interia: 54 g.cm
Mass:0.40kg
Package included:
1X 2 Phase 4-Wire Stepper Motor

Product Description
1.8 Degree 42mm NEMA17 2 Phase 4-wire Stepper Motor For 3D Printer or CNC
Features:
100% brand new and high quality
2 phase NEMA17 42mm 4-wire stepper motor
Fits for 3D printers, monitor equipment, medical machinery, textile machinery,
packaging machinery, stage lighting and so on .
Wiring: Black Green A , A- red and Blue B , B-,.
Adapter Drive JK0220 (drive voltage DC12V 36V, AC12V 24V, current range 0.3A 2.0A).
Specifications
Model: JK42HS40-1704
phase : 2
Material: Metal
Color: As picture shows
Size: 42*42*40 mm
Rated voltage: 12-24V
Power: 5W
Current: 1.7A
Rated Speed: 0-1500 RPM
Rated torque: 0.42 NM
Step angel:1.8°
Temp. rise: max 80 ℃
Ambient temp.: -20 ℃ -50 ℃
Insulation resistance:100MΩmin.(500V DC)
Dielectric strength: 500VAC for 1 minute
Shaft Radial Play: 0.02Max. (450g-load)
Shaft Axial Play: 0.08Max. (450g-load)
Max. radial force: 28N (20mm from the flange)
Max. axial force: 10N
Electrical specification
Motor length: 40 (L) mm,34(L)mm,48(L)mm
Rated current:1.68A
Resistence per phase:1.5Ω
Inductance per phase:2.3mH
Holding torque:4.2 kg.cm
# of leads No.: 4
Detent torque:150 g.cm
Rotor interia: 54 g.cm
Mass:0.40kg
Package included:
1X 2 Phase 4-Wire Stepper Motor

Cables Extension Terminal Cables 500mm 800mm 1000mm Replacement Accessory
Item Details:
* XH2.54 4pin-6pin Stepper Motor Connector Cables Extension Cable For 3D Printer
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* It is easy to use and install.
* Long service life. Precise design will ensure its practicality in high performance work.
* For 3D printer production line HX2.54 4-pin-6 pin white terminal cable for stepper motor.
* Color: As pictures show
* Connector: 4pin-6pin
* Optional Cable Length: 500mm, 800mm, 1000mm, 1500mm
Package Contents:
1*HX2.54 4pin-6pin Terminal Cables For Stepper Motors
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Cables Extension Terminal Cables 500mm 800mm 1000mm Replacement Accessory
Item Details:
* XH2.54 4pin-6pin Stepper Motor Connector Cables Extension Cable For 3D Printer
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* It is easy to use and install.
* Long service life. Precise design will ensure its practicality in high performance work.
* For 3D printer production line HX2.54 4-pin-6 pin white terminal cable for stepper motor.
* Color: As pictures show
* Connector: 4pin-6pin
* Optional Cable Length: 500mm, 800mm, 1000mm, 1500mm
Package Contents:
1*HX2.54 4pin-6pin Terminal Cables For Stepper Motors
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Cables Extension Terminal Cables 500mm 800mm 1000mm Replacement Accessory
Item Details:
* XH2.54 4pin-6pin Stepper Motor Connector Cables Extension Cable For 3D Printer
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* It is easy to use and install.
* Long service life. Precise design will ensure its practicality in high performance work.
* For 3D printer production line HX2.54 4-pin-6 pin white terminal cable for stepper motor.
* Color: As pictures show
* Connector: 4pin-6pin
* Optional Cable Length: 500mm, 800mm, 1000mm, 1500mm
Package Contents:
1*HX2.54 4pin-6pin Terminal Cables For Stepper Motors
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

1pc For 3D Printer Connector Line HX2.54 4-6pin Terminal Cable For Stepper Motor
Item Details:
* XH2.54 4pin-6pin Stepper Motor Connector Cables Extension Cable For 3D Printer
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* It is easy to use and install.
* Long service life. Precise design will ensure its practicality in high performance work.
* For 3D printer production line HX2.54 4-pin-6 pin white terminal cable for stepper motor.
* Color: As pictures show
* Connector: 4pin-6pin
* Optional Cable Length: 500mm, 800mm, 1000mm, 1500mm
Package Contents:
1*HX2.54 4pin-6pin Terminal Cables For Stepper Motors
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

1pc For 3D Printer Connector Line HX2.54 4-6pin Terminal Cable For Stepper Motor
Item Details:
* XH2.54 4pin-6pin Stepper Motor Connector Cables Extension Cable For 3D Printer
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* It is easy to use and install.
* Long service life. Precise design will ensure its practicality in high performance work.
* For 3D printer production line HX2.54 4-pin-6 pin white terminal cable for stepper motor.
* Color: As pictures show
* Connector: 4pin-6pin
* Optional Cable Length: 500mm, 800mm, 1000mm, 1500mm
Package Contents:
1*HX2.54 4pin-6pin Terminal Cables For Stepper Motors
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

1pc For 3D Printer Connector Line HX2.54 4-6pin Terminal Cable For Stepper Motor
Item Details:
* XH2.54 4pin-6pin Stepper Motor Connector Cables Extension Cable For 3D Printer
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* It is easy to use and install.
* Long service life. Precise design will ensure its practicality in high performance work.
* For 3D printer production line HX2.54 4-pin-6 pin white terminal cable for stepper motor.
* Color: As pictures show
* Connector: 4pin-6pin
* Optional Cable Length: 500mm, 800mm, 1000mm, 1500mm
Package Contents:
1*HX2.54 4pin-6pin Terminal Cables For Stepper Motors
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

1pcs 50cm/80cm/100cm/150cm Stepper Motor Connector Cables Wires For 3D Printer
Item Details:
* XH2.54 4pin-6pin Stepper Motor Connector Cables Extension Cable For 3D Printer
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* It is easy to use and install.
* Long service life. Precise design will ensure its practicality in high performance work.
* For 3D printer production line HX2.54 4-pin-6 pin white terminal cable for stepper motor.
* Color: As pictures show
* Connector: 4pin-6pin
* Optional Cable Length: 500mm, 800mm, 1000mm, 1500mm
Package Contents:
1*HX2.54 4pin-6pin Terminal Cables For Stepper Motors
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

1pcs 50cm/80cm/100cm/150cm Stepper Motor Connector Cables Wires For 3D Printer
Item Details:
* XH2.54 4pin-6pin Stepper Motor Connector Cables Extension Cable For 3D Printer
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* It is easy to use and install.
* Long service life. Precise design will ensure its practicality in high performance work.
* For 3D printer production line HX2.54 4-pin-6 pin white terminal cable for stepper motor.
* Color: As pictures show
* Connector: 4pin-6pin
* Optional Cable Length: 500mm, 800mm, 1000mm, 1500mm
Package Contents:
1*HX2.54 4pin-6pin Terminal Cables For Stepper Motors
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

1pcs 50cm/80cm/100cm/150cm Stepper Motor Connector Cables Wires For 3D Printer
Item Details:
* XH2.54 4pin-6pin Stepper Motor Connector Cables Extension Cable For 3D Printer
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* It is easy to use and install.
* Long service life. Precise design will ensure its practicality in high performance work.
* For 3D printer production line HX2.54 4-pin-6 pin white terminal cable for stepper motor.
* Color: As pictures show
* Connector: 4pin-6pin
* Optional Cable Length: 500mm, 800mm, 1000mm, 1500mm
Package Contents:
1*HX2.54 4pin-6pin Terminal Cables For Stepper Motors
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Cables Extension Terminal Cables 1000mm 1500mm XH2.54 4pin-6pin Durable
Item Details:
* XH2.54 4pin-6pin Stepper Motor Connector Cables Extension Cable For 3D Printer
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* It is easy to use and install.
* Long service life. Precise design will ensure its practicality in high performance work.
* For 3D printer production line HX2.54 4-pin-6 pin white terminal cable for stepper motor.
* Color: As pictures show
* Connector: 4pin-6pin
* Optional Cable Length: 500mm, 800mm, 1000mm, 1500mm
Package Contents:
1*HX2.54 4pin-6pin Terminal Cables For Stepper Motors
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Cables Extension Terminal Cables 1000mm 1500mm XH2.54 4pin-6pin Durable
Item Details:
* XH2.54 4pin-6pin Stepper Motor Connector Cables Extension Cable For 3D Printer
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* It is easy to use and install.
* Long service life. Precise design will ensure its practicality in high performance work.
* For 3D printer production line HX2.54 4-pin-6 pin white terminal cable for stepper motor.
* Color: As pictures show
* Connector: 4pin-6pin
* Optional Cable Length: 500mm, 800mm, 1000mm, 1500mm
Package Contents:
1*HX2.54 4pin-6pin Terminal Cables For Stepper Motors
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.