Elektromos motorok

From 30 to 400RPM Gear Motor 7-speed Parts Hot from 30 to 400RPM Long Shaft 2018
Features:
*DC6V mini metal gear motor, designed to produce high torque
*Used to reduce speed in a series of gears, which in turn creates more torque.
*Full metal gears would ensure a longer service life, high torque and less noise.
*There are seven reduction gear motors of different speed for you to choose: 30RPM, 60RPM, 100RPM, 150RPM, 200RPM, 300RPM, 400RPM
*Used in many devices in your home.
Specifications:
*Material: Metal
*Color: As Pictures Show
*Voltage: DC 6V
*Speed: 30RPM, 60RPM, 100RPM, 150RPM, 200RPM, 300RPM, 400RPM (Optional)
*Output Shaft Length: 55mm/2.16 inches (Approx.)
*Output Shaft Diameter: M3
Package Contents:
1*Gear Motor
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

From 30 to 400RPM Gear Motor 7-speed Parts Hot from 30 to 400RPM Long Shaft 2018
Features:
*DC6V mini metal gear motor, designed to produce high torque
*Used to reduce speed in a series of gears, which in turn creates more torque.
*Full metal gears would ensure a longer service life, high torque and less noise.
*There are seven reduction gear motors of different speed for you to choose: 30RPM, 60RPM, 100RPM, 150RPM, 200RPM, 300RPM, 400RPM
*Used in many devices in your home.
Specifications:
*Material: Metal
*Color: As Pictures Show
*Voltage: DC 6V
*Speed: 30RPM, 60RPM, 100RPM, 150RPM, 200RPM, 300RPM, 400RPM (Optional)
*Output Shaft Length: 55mm/2.16 inches (Approx.)
*Output Shaft Diameter: M3
Package Contents:
1*Gear Motor
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

DC-6V Mini Metal Gear Motor From 30-400RPM Long Shaft Screw Thread Kits M3x55mm
Features:
*DC6V mini metal gear motor, designed to produce high torque
*Used to reduce speed in a series of gears, which in turn creates more torque.
*Full metal gears would ensure a longer service life, high torque and less noise.
*There are seven reduction gear motors of different speed for you to choose: 30RPM, 60RPM, 100RPM, 150RPM, 200RPM, 300RPM, 400RPM
*Used in many devices in your home.
Specifications:
*Material: Metal
*Color: As Pictures Show
*Voltage: DC 6V
*Speed: 30RPM, 60RPM, 100RPM, 150RPM, 200RPM, 300RPM, 400RPM (Optional)
*Output Shaft Length: 55mm/2.16 inches (Approx.)
*Output Shaft Diameter: M3
Package Contents:
1*Gear Motor
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

DC-6V Mini Metal Gear Motor From 30-400RPM Long Shaft Screw Thread Kits M3x55mm
Features:
*DC6V mini metal gear motor, designed to produce high torque
*Used to reduce speed in a series of gears, which in turn creates more torque.
*Full metal gears would ensure a longer service life, high torque and less noise.
*There are seven reduction gear motors of different speed for you to choose: 30RPM, 60RPM, 100RPM, 150RPM, 200RPM, 300RPM, 400RPM
*Used in many devices in your home.
Specifications:
*Material: Metal
*Color: As Pictures Show
*Voltage: DC 6V
*Speed: 30RPM, 60RPM, 100RPM, 150RPM, 200RPM, 300RPM, 400RPM (Optional)
*Output Shaft Length: 55mm/2.16 inches (Approx.)
*Output Shaft Diameter: M3
Package Contents:
1*Gear Motor
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

DC-6V Mini Metal Gear Motor From 30-400RPM Long Shaft Screw Thread Kits M3x55mm
Features:
*DC6V mini metal gear motor, designed to produce high torque
*Used to reduce speed in a series of gears, which in turn creates more torque.
*Full metal gears would ensure a longer service life, high torque and less noise.
*There are seven reduction gear motors of different speed for you to choose: 30RPM, 60RPM, 100RPM, 150RPM, 200RPM, 300RPM, 400RPM
*Used in many devices in your home.
Specifications:
*Material: Metal
*Color: As Pictures Show
*Voltage: DC 6V
*Speed: 30RPM, 60RPM, 100RPM, 150RPM, 200RPM, 300RPM, 400RPM (Optional)
*Output Shaft Length: 55mm/2.16 inches (Approx.)
*Output Shaft Diameter: M3
Package Contents:
1*Gear Motor
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

DC-6V Mini Metal Gear Motor From 30-400RPM Long Shaft Screw Thread Kits M3x55mm
Features:
*DC6V mini metal gear motor, designed to produce high torque
*Used to reduce speed in a series of gears, which in turn creates more torque.
*Full metal gears would ensure a longer service life, high torque and less noise.
*There are seven reduction gear motors of different speed for you to choose: 30RPM, 60RPM, 100RPM, 150RPM, 200RPM, 300RPM, 400RPM
*Used in many devices in your home.
Specifications:
*Material: Metal
*Color: As Pictures Show
*Voltage: DC 6V
*Speed: 30RPM, 60RPM, 100RPM, 150RPM, 200RPM, 300RPM, 400RPM (Optional)
*Output Shaft Length: 55mm/2.16 inches (Approx.)
*Output Shaft Diameter: M3
Package Contents:
1*Gear Motor
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

DC6V 30RPM Mini Metal Gear Motor Long Shaft Screw Thread M3x55mm DIY TOY
Features:
*DC6V mini metal gear motor, designed to produce high torque
*Used to reduce speed in a series of gears, which in turn creates more torque.
*Full metal gears would ensure a longer service life, high torque and less noise.
*There are seven reduction gear motors of different speed for you to choose: 30RPM, 60RPM, 100RPM, 150RPM, 200RPM, 300RPM, 400RPM
*Used in many devices in your home.
Specifications:
*Material: Metal
*Color: As Pictures Show
*Voltage: DC 6V
*Speed: 30RPM, 60RPM, 100RPM, 150RPM, 200RPM, 300RPM, 400RPM (Optional)
*Output Shaft Length: 55mm/2.16 inches (Approx.)
*Output Shaft Diameter: M3
Package Contents:
1*Gear Motor
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

DC6V 30RPM Mini Metal Gear Motor Long Shaft Screw Thread M3x55mm DIY TOY
Features:
*DC6V mini metal gear motor, designed to produce high torque
*Used to reduce speed in a series of gears, which in turn creates more torque.
*Full metal gears would ensure a longer service life, high torque and less noise.
*There are seven reduction gear motors of different speed for you to choose: 30RPM, 60RPM, 100RPM, 150RPM, 200RPM, 300RPM, 400RPM
*Used in many devices in your home.
Specifications:
*Material: Metal
*Color: As Pictures Show
*Voltage: DC 6V
*Speed: 30RPM, 60RPM, 100RPM, 150RPM, 200RPM, 300RPM, 400RPM (Optional)
*Output Shaft Length: 55mm/2.16 inches (Approx.)
*Output Shaft Diameter: M3
Package Contents:
1*Gear Motor
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

DC6V 30RPM Mini Metal Gear Motor Long Shaft Screw Thread M3x55mm DIY TOY
Features:
*DC6V mini metal gear motor, designed to produce high torque
*Used to reduce speed in a series of gears, which in turn creates more torque.
*Full metal gears would ensure a longer service life, high torque and less noise.
*There are seven reduction gear motors of different speed for you to choose: 30RPM, 60RPM, 100RPM, 150RPM, 200RPM, 300RPM, 400RPM
*Used in many devices in your home.
Specifications:
*Material: Metal
*Color: As Pictures Show
*Voltage: DC 6V
*Speed: 30RPM, 60RPM, 100RPM, 150RPM, 200RPM, 300RPM, 400RPM (Optional)
*Output Shaft Length: 55mm/2.16 inches (Approx.)
*Output Shaft Diameter: M3
Package Contents:
1*Gear Motor
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

DC6V 30RPM Mini Metal Gear Motor Long Shaft Screw Thread M3x55mm DIY TOY
Features:
*DC6V mini metal gear motor, designed to produce high torque
*Used to reduce speed in a series of gears, which in turn creates more torque.
*Full metal gears would ensure a longer service life, high torque and less noise.
*There are seven reduction gear motors of different speed for you to choose: 30RPM, 60RPM, 100RPM, 150RPM, 200RPM, 300RPM, 400RPM
*Used in many devices in your home.
Specifications:
*Material: Metal
*Color: As Pictures Show
*Voltage: DC 6V
*Speed: 30RPM, 60RPM, 100RPM, 150RPM, 200RPM, 300RPM, 400RPM (Optional)
*Output Shaft Length: 55mm/2.16 inches (Approx.)
*Output Shaft Diameter: M3
Package Contents:
1*Gear Motor
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Strong Magnetic DC Dual Shaft Gear Motor For Electronic Products Robot Toy Car
Item Details:
*Strong Magnetic DC Dual Shaft Gear Motor for Toy Car
*Suitable for scientific electronic products, robot electric body, bubble gun toy gun body, 4WD toy car, toy plane class, class products such as vibration electric toy products etc.
*With strong magnetic, anti interference
*Durable and reliable to use
*100% brand new and high quality
*Color: As Pictures Show
*Voltage 6V, no-load current: ≤200mA, no-load speed: 200±10% rpm
*Voltage: 3V, no-load current: ≤150mA, no-load speed: 90±10% rpm
Package Contents:
1*Gear Motor
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

50cm*300cm Mini Metal Micro Gear Motor 30~400RPM Long Shaft Screw Thread DC 6V
Features:
*DC6V mini metal gear motor, designed to produce high torque
*Used to reduce speed in a series of gears, which in turn creates more torque.
*Full metal gears would ensure a longer service life, high torque and less noise.
*There are seven reduction gear motors of different speed for you to choose: 30RPM, 60RPM, 100RPM, 150RPM, 200RPM, 300RPM, 400RPM
*Used in many devices in your home.
Specifications:
*Material: Metal
*Color: As Pictures Show
*Voltage: DC 6V
*Speed: 30RPM, 60RPM, 100RPM, 150RPM, 200RPM, 300RPM, 400RPM (Optional)
*Output Shaft Length: 55mm/2.16 inches (Approx.)
*Output Shaft Diameter: M3
Package Contents:
1*Gear Motor
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

50cm*300cm Mini Metal Micro Gear Motor 30~400RPM Long Shaft Screw Thread DC 6V
Features:
*DC6V mini metal gear motor, designed to produce high torque
*Used to reduce speed in a series of gears, which in turn creates more torque.
*Full metal gears would ensure a longer service life, high torque and less noise.
*There are seven reduction gear motors of different speed for you to choose: 30RPM, 60RPM, 100RPM, 150RPM, 200RPM, 300RPM, 400RPM
*Used in many devices in your home.
Specifications:
*Material: Metal
*Color: As Pictures Show
*Voltage: DC 6V
*Speed: 30RPM, 60RPM, 100RPM, 150RPM, 200RPM, 300RPM, 400RPM (Optional)
*Output Shaft Length: 55mm/2.16 inches (Approx.)
*Output Shaft Diameter: M3
Package Contents:
1*Gear Motor
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

50cm*300cm Mini Metal Micro Gear Motor 30~400RPM Long Shaft Screw Thread DC 6V
Features:
*DC6V mini metal gear motor, designed to produce high torque
*Used to reduce speed in a series of gears, which in turn creates more torque.
*Full metal gears would ensure a longer service life, high torque and less noise.
*There are seven reduction gear motors of different speed for you to choose: 30RPM, 60RPM, 100RPM, 150RPM, 200RPM, 300RPM, 400RPM
*Used in many devices in your home.
Specifications:
*Material: Metal
*Color: As Pictures Show
*Voltage: DC 6V
*Speed: 30RPM, 60RPM, 100RPM, 150RPM, 200RPM, 300RPM, 400RPM (Optional)
*Output Shaft Length: 55mm/2.16 inches (Approx.)
*Output Shaft Diameter: M3
Package Contents:
1*Gear Motor
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

50cm*300cm Mini Metal Micro Gear Motor 30~400RPM Long Shaft Screw Thread DC 6V
Features:
*DC6V mini metal gear motor, designed to produce high torque
*Used to reduce speed in a series of gears, which in turn creates more torque.
*Full metal gears would ensure a longer service life, high torque and less noise.
*There are seven reduction gear motors of different speed for you to choose: 30RPM, 60RPM, 100RPM, 150RPM, 200RPM, 300RPM, 400RPM
*Used in many devices in your home.
Specifications:
*Material: Metal
*Color: As Pictures Show
*Voltage: DC 6V
*Speed: 30RPM, 60RPM, 100RPM, 150RPM, 200RPM, 300RPM, 400RPM (Optional)
*Output Shaft Length: 55mm/2.16 inches (Approx.)
*Output Shaft Diameter: M3
Package Contents:
1*Gear Motor
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

0.19A Motor 29.9mN.m for MABUCHI RS-365SH-2080 Brush DC12V 12800RPM Brand New
Detail:
*DC12V 12800RPM Motor, high performance and reliable.
*High stability, low noise.
*Easy to install and use.
*Item Condition:100% Brand New
*Color: As Pictures Show
*Rated Voltage: DC12V
*No-load Speed:12800RPM
*No-load Current: 0.19A
*Stalling Torque: 29.9mN.m(305g.cm)
*Efficiency Current: 0.83A(Max.)
Package Contents:
1*Motor
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Features:
*DC6V mini metal gear motor, designed to produce high torque
*Used to reduce speed in a series of gears, which in turn creates more torque.
*Full metal gears would ensure a longer service life, high torque and less noise.
*There are seven reduction gear motors of different speed for you to choose: 30RPM, 60RPM, 100RPM, 150RPM, 200RPM, 300RPM, 400RPM
*Used in many devices in your home.
Specifications:
*Material: Metal
*Color: As Pictures Show
*Voltage: DC 6V
*Speed: 30RPM, 60RPM, 100RPM, 150RPM, 200RPM, 300RPM, 400RPM (Optional)
*Output Shaft Length: 55mm/2.16 inches (Approx.)
*Output Shaft Diameter: M3
Package Contents:
1*Gear Motor
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Features:
*DC6V mini metal gear motor, designed to produce high torque
*Used to reduce speed in a series of gears, which in turn creates more torque.
*Full metal gears would ensure a longer service life, high torque and less noise.
*There are seven reduction gear motors of different speed for you to choose: 30RPM, 60RPM, 100RPM, 150RPM, 200RPM, 300RPM, 400RPM
*Used in many devices in your home.
Specifications:
*Material: Metal
*Color: As Pictures Show
*Voltage: DC 6V
*Speed: 30RPM, 60RPM, 100RPM, 150RPM, 200RPM, 300RPM, 400RPM (Optional)
*Output Shaft Length: 55mm/2.16 inches (Approx.)
*Output Shaft Diameter: M3
Package Contents:
1*Gear Motor
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Features:
*DC6V mini metal gear motor, designed to produce high torque
*Used to reduce speed in a series of gears, which in turn creates more torque.
*Full metal gears would ensure a longer service life, high torque and less noise.
*There are seven reduction gear motors of different speed for you to choose: 30RPM, 60RPM, 100RPM, 150RPM, 200RPM, 300RPM, 400RPM
*Used in many devices in your home.
Specifications:
*Material: Metal
*Color: As Pictures Show
*Voltage: DC 6V
*Speed: 30RPM, 60RPM, 100RPM, 150RPM, 200RPM, 300RPM, 400RPM (Optional)
*Output Shaft Length: 55mm/2.16 inches (Approx.)
*Output Shaft Diameter: M3
Package Contents:
1*Gear Motor
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Features:
*DC6V mini metal gear motor, designed to produce high torque
*Used to reduce speed in a series of gears, which in turn creates more torque.
*Full metal gears would ensure a longer service life, high torque and less noise.
*There are seven reduction gear motors of different speed for you to choose: 30RPM, 60RPM, 100RPM, 150RPM, 200RPM, 300RPM, 400RPM
*Used in many devices in your home.
Specifications:
*Material: Metal
*Color: As Pictures Show
*Voltage: DC 6V
*Speed: 30RPM, 60RPM, 100RPM, 150RPM, 200RPM, 300RPM, 400RPM (Optional)
*Output Shaft Length: 55mm/2.16 inches (Approx.)
*Output Shaft Diameter: M3
Package Contents:
1*Gear Motor
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

6mm Precision miniature Micro Planetary Reduction Reducer Motor Practical
Features:
100% brand new and high quality
It has the characteristics of high rigidity, high precision, high transmission efficiency (single-stage 97-98% ), high torque/volume ratio, etc.
Most are installed on stepper motors and servo motors to reduce RPM, increase torque and match inertia.
Robust, long life, corrosion resistant, suitable for a variety of environments.
Stable performance, good consistency, low noise, high torque.
Good wear resistance, high temperature resistance and impact resistance.
Specification:
Project Type: Geared Motor
Material: metal
Optional types: One Stage, Two Stage, Three Stage, Four Stage
6mm first-level geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 6420±120RPM
Torque used: 5g.cm
Transmission ratio: 5.14:1
No-load noise: <48DB
6mm two-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 1200±120RPM
Torque used: 27g.cm
Transmission ratio: 26.45
No-load noise: <48DB
6mm three-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 230MA max
Blocking current: ≤200MA
Output speed: 242±120RPM
Torque used: 120g.cm
Transmission ratio: 136.02
No-load noise: <48DB
6mm four-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤0.5DVC
No-load current: maximum 200MA
Blocking current: ≤200MA
Output speed: 46±5RPM
Torque used: 180g.cm
Transmission ratio: 699.5
No-load noise: <48DB
Packing list:
1 * Geared motor
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

6mm Precision miniature Micro Planetary Reduction Reducer Motor Practical
Features:
100% brand new and high quality
It has the characteristics of high rigidity, high precision, high transmission efficiency (single-stage 97-98% ), high torque/volume ratio, etc.
Most are installed on stepper motors and servo motors to reduce RPM, increase torque and match inertia.
Robust, long life, corrosion resistant, suitable for a variety of environments.
Stable performance, good consistency, low noise, high torque.
Good wear resistance, high temperature resistance and impact resistance.
Specification:
Project Type: Geared Motor
Material: metal
Optional types: One Stage, Two Stage, Three Stage, Four Stage
6mm first-level geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 6420±120RPM
Torque used: 5g.cm
Transmission ratio: 5.14:1
No-load noise: <48DB
6mm two-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 1200±120RPM
Torque used: 27g.cm
Transmission ratio: 26.45
No-load noise: <48DB
6mm three-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 230MA max
Blocking current: ≤200MA
Output speed: 242±120RPM
Torque used: 120g.cm
Transmission ratio: 136.02
No-load noise: <48DB
6mm four-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤0.5DVC
No-load current: maximum 200MA
Blocking current: ≤200MA
Output speed: 46±5RPM
Torque used: 180g.cm
Transmission ratio: 699.5
No-load noise: <48DB
Packing list:
1 * Geared motor
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

6mm Precision miniature Micro Planetary Reduction Reducer Motor Practical
Features:
100% brand new and high quality
It has the characteristics of high rigidity, high precision, high transmission efficiency (single-stage 97-98% ), high torque/volume ratio, etc.
Most are installed on stepper motors and servo motors to reduce RPM, increase torque and match inertia.
Robust, long life, corrosion resistant, suitable for a variety of environments.
Stable performance, good consistency, low noise, high torque.
Good wear resistance, high temperature resistance and impact resistance.
Specification:
Project Type: Geared Motor
Material: metal
Optional types: One Stage, Two Stage, Three Stage, Four Stage
6mm first-level geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 6420±120RPM
Torque used: 5g.cm
Transmission ratio: 5.14:1
No-load noise: <48DB
6mm two-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 1200±120RPM
Torque used: 27g.cm
Transmission ratio: 26.45
No-load noise: <48DB
6mm three-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 230MA max
Blocking current: ≤200MA
Output speed: 242±120RPM
Torque used: 120g.cm
Transmission ratio: 136.02
No-load noise: <48DB
6mm four-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤0.5DVC
No-load current: maximum 200MA
Blocking current: ≤200MA
Output speed: 46±5RPM
Torque used: 180g.cm
Transmission ratio: 699.5
No-load noise: <48DB
Packing list:
1 * Geared motor
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

6mm Precision miniature Micro Planetary Reduction Reducer Motor Practical
Features:
100% brand new and high quality
It has the characteristics of high rigidity, high precision, high transmission efficiency (single-stage 97-98% ), high torque/volume ratio, etc.
Most are installed on stepper motors and servo motors to reduce RPM, increase torque and match inertia.
Robust, long life, corrosion resistant, suitable for a variety of environments.
Stable performance, good consistency, low noise, high torque.
Good wear resistance, high temperature resistance and impact resistance.
Specification:
Project Type: Geared Motor
Material: metal
Optional types: One Stage, Two Stage, Three Stage, Four Stage
6mm first-level geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 6420±120RPM
Torque used: 5g.cm
Transmission ratio: 5.14:1
No-load noise: <48DB
6mm two-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 1200±120RPM
Torque used: 27g.cm
Transmission ratio: 26.45
No-load noise: <48DB
6mm three-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 230MA max
Blocking current: ≤200MA
Output speed: 242±120RPM
Torque used: 120g.cm
Transmission ratio: 136.02
No-load noise: <48DB
6mm four-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤0.5DVC
No-load current: maximum 200MA
Blocking current: ≤200MA
Output speed: 46±5RPM
Torque used: 180g.cm
Transmission ratio: 699.5
No-load noise: <48DB
Packing list:
1 * Geared motor
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

5pcs set Stepper Motor Cables Kit 100cm With 2 connectors Practical New
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
Stepper motor cable 100cm 1m long for NEMA 17in for Reprap
This item is stepper motor cable, with 1 meter long cable with 2 connectors, it is easy to use and install.
It is perfect for NEMA 17 used in for Reprap for 3D printers.
6pin JST connector on the stepper side, compatible with many stepper models.
4pin Dupont connector on the driver side, compatible with RAMPS card and others.
Specification:
Type: Stepper Motor Cable
Interface: 1 x 6pin JST Connector, 1 x 4pin Dupont Connector
Material: Silicone Rubber.
Length: 100 cm(Approx.)
Quantity: 5pcs/Set
Package Contents:
5 x Stepper Motor Cables
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Small DC Gear Motor 3V~9V 21RPM Low Speed High Torque Mini Worm Motor DIY
Detail:
*Gear Motor, high stability and low speed.
*Full metal gears ensures a longer service life, high torque and less noise.
*Easy to install and use.
*Item Condition:100% Brand New
*Color: As Pictures Show
*No-load speed: 21RPM
*No-load current: 50mA
*Input voltage:3-9V
*Rated voltage:6V
Package Contents:
2*Gear Motor
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Mini Precision miniature Micro Planetary Gear Motor High quality Brand new
Features:
100% brand new and high quality
It has the characteristics of high rigidity, high precision, high transmission efficiency (single-stage 97-98% ), high torque/volume ratio, etc.
Most are installed on stepper motors and servo motors to reduce RPM, increase torque and match inertia.
Robust, long life, corrosion resistant, suitable for a variety of environments.
Stable performance, good consistency, low noise, high torque.
Good wear resistance, high temperature resistance and impact resistance.
Specification:
Project Type: Geared Motor
Material: metal
Optional types: One Stage, Two Stage, Three Stage, Four Stage
6mm first-level geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 6420±120RPM
Torque used: 5g.cm
Transmission ratio: 5.14:1
No-load noise: <48DB
6mm two-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 1200±120RPM
Torque used: 27g.cm
Transmission ratio: 26.45
No-load noise: <48DB
6mm three-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 230MA max
Blocking current: ≤200MA
Output speed: 242±120RPM
Torque used: 120g.cm
Transmission ratio: 136.02
No-load noise: <48DB
6mm four-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤0.5DVC
No-load current: maximum 200MA
Blocking current: ≤200MA
Output speed: 46±5RPM
Torque used: 180g.cm
Transmission ratio: 699.5
No-load noise: <48DB
Packing list:
1 * Geared motor
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Mini Precision miniature Micro Planetary Gear Motor High quality Brand new
Features:
100% brand new and high quality
It has the characteristics of high rigidity, high precision, high transmission efficiency (single-stage 97-98% ), high torque/volume ratio, etc.
Most are installed on stepper motors and servo motors to reduce RPM, increase torque and match inertia.
Robust, long life, corrosion resistant, suitable for a variety of environments.
Stable performance, good consistency, low noise, high torque.
Good wear resistance, high temperature resistance and impact resistance.
Specification:
Project Type: Geared Motor
Material: metal
Optional types: One Stage, Two Stage, Three Stage, Four Stage
6mm first-level geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 6420±120RPM
Torque used: 5g.cm
Transmission ratio: 5.14:1
No-load noise: <48DB
6mm two-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 1200±120RPM
Torque used: 27g.cm
Transmission ratio: 26.45
No-load noise: <48DB
6mm three-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 230MA max
Blocking current: ≤200MA
Output speed: 242±120RPM
Torque used: 120g.cm
Transmission ratio: 136.02
No-load noise: <48DB
6mm four-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤0.5DVC
No-load current: maximum 200MA
Blocking current: ≤200MA
Output speed: 46±5RPM
Torque used: 180g.cm
Transmission ratio: 699.5
No-load noise: <48DB
Packing list:
1 * Geared motor
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Mini Precision miniature Micro Planetary Gear Motor High quality Brand new
Features:
100% brand new and high quality
It has the characteristics of high rigidity, high precision, high transmission efficiency (single-stage 97-98% ), high torque/volume ratio, etc.
Most are installed on stepper motors and servo motors to reduce RPM, increase torque and match inertia.
Robust, long life, corrosion resistant, suitable for a variety of environments.
Stable performance, good consistency, low noise, high torque.
Good wear resistance, high temperature resistance and impact resistance.
Specification:
Project Type: Geared Motor
Material: metal
Optional types: One Stage, Two Stage, Three Stage, Four Stage
6mm first-level geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 6420±120RPM
Torque used: 5g.cm
Transmission ratio: 5.14:1
No-load noise: <48DB
6mm two-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 1200±120RPM
Torque used: 27g.cm
Transmission ratio: 26.45
No-load noise: <48DB
6mm three-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 230MA max
Blocking current: ≤200MA
Output speed: 242±120RPM
Torque used: 120g.cm
Transmission ratio: 136.02
No-load noise: <48DB
6mm four-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤0.5DVC
No-load current: maximum 200MA
Blocking current: ≤200MA
Output speed: 46±5RPM
Torque used: 180g.cm
Transmission ratio: 699.5
No-load noise: <48DB
Packing list:
1 * Geared motor
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Mini Precision miniature Micro Planetary Gear Motor High quality Brand new
Features:
100% brand new and high quality
It has the characteristics of high rigidity, high precision, high transmission efficiency (single-stage 97-98% ), high torque/volume ratio, etc.
Most are installed on stepper motors and servo motors to reduce RPM, increase torque and match inertia.
Robust, long life, corrosion resistant, suitable for a variety of environments.
Stable performance, good consistency, low noise, high torque.
Good wear resistance, high temperature resistance and impact resistance.
Specification:
Project Type: Geared Motor
Material: metal
Optional types: One Stage, Two Stage, Three Stage, Four Stage
6mm first-level geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 6420±120RPM
Torque used: 5g.cm
Transmission ratio: 5.14:1
No-load noise: <48DB
6mm two-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 1200±120RPM
Torque used: 27g.cm
Transmission ratio: 26.45
No-load noise: <48DB
6mm three-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 230MA max
Blocking current: ≤200MA
Output speed: 242±120RPM
Torque used: 120g.cm
Transmission ratio: 136.02
No-load noise: <48DB
6mm four-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤0.5DVC
No-load current: maximum 200MA
Blocking current: ≤200MA
Output speed: 46±5RPM
Torque used: 180g.cm
Transmission ratio: 699.5
No-load noise: <48DB
Packing list:
1 * Geared motor
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Black U-775 Motor Base Electroplating Fixed Mounts Machine Seat Support Brackets
Features:
*100% brand new and high quality
*Fit to mini 775 engine as support or support.
*The U-type and standard-type motor mount, which adopts the electroplating process, has a good anti-rust effect.
*775 fixed motors in a firm manner, convenient to use the saw blade.
*Made of high quality mental material, resistant and durable in use.
*This engine mount comes with nuts and bolts, convenient for mounting and fixing the engine
Specifications:
*Color: Black (As Pictures Show)
*Material: Iron
*Type: U-shaped / standard
*Surface: electroplating
*Vertical surface: thickness 3mm, height 40mm, width 50mm (Approx.)
*Base plate: length 60mm, thickness 3mm, width 50mm (Approx.)
*Center U slot: diameter is about 17.5mm (775 motor step is smaller than the motor with this aperture)
*Motor mounting hole (Approx.): 4mm (suitable for M4 screw)
*Applicable to the mini 775 engine as a stand or bracket
Package Contents:
1*Bracket
6*Nuts
6*Screws
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Electroplating bracket U-775 Machine seat Engine Equipment Holder rack
Features:
*100% brand new and high quality
*Fit to mini 775 engine as support or support.
*The U-type and standard-type motor mount, which adopts the electroplating process, has a good anti-rust effect.
*775 fixed motors in a firm manner, convenient to use the saw blade.
*Made of high quality mental material, resistant and durable in use.
*This engine mount comes with nuts and bolts, convenient for mounting and fixing the engine
Specifications:
*Color: Black (As Pictures Show)
*Material: Iron
*Type: U-shaped / standard
*Surface: electroplating
*Vertical surface: thickness 3mm, height 40mm, width 50mm (Approx.)
*Base plate: length 60mm, thickness 3mm, width 50mm (Approx.)
*Center U slot: diameter is about 17.5mm (775 motor step is smaller than the motor with this aperture)
*Motor mounting hole (Approx.): 4mm (suitable for M4 screw)
*Applicable to the mini 775 engine as a stand or bracket
Package Contents:
1*Bracket
6*Nuts
6*Screws
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

New 1x Strong Magnetic Dual Shaft Gear Motor Smart Robot DC 3V-6V For Toy Car
Item Details:
*Strong Magnetic DC Dual Shaft Gear Motor for Toy Car
*Suitable for scientific electronic products, robot electric body, bubble gun toy gun body, 4WD toy car, toy plane class, class products such as vibration electric toy products etc.
*With strong magnetic, anti interference
*Durable and reliable to use
*100% brand new and high quality
*Color: As Pictures Show
*Voltage 6V, no-load current: ≤200mA, no-load speed: 200±10% rpm
*Voltage: 3V, no-load current: ≤150mA, no-load speed: 90±10% rpm
Package Contents:
1*Gear Motor
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

1PC Strong Magnetic DC Dual Shaft Gear Motor For Scientific Electronic Product
Item Details:
*Strong Magnetic DC Dual Shaft Gear Motor for Toy Car
*Suitable for scientific electronic products, robot electric body, bubble gun toy gun body, 4WD toy car, toy plane class, class products such as vibration electric toy products etc.
*With strong magnetic, anti interference
*Durable and reliable to use
*100% brand new and high quality
*Color: As Pictures Show
*Voltage 6V, no-load current: ≤200mA, no-load speed: 200±10% rpm
*Voltage: 3V, no-load current: ≤150mA, no-load speed: 90±10% rpm
Package Contents:
1*Gear Motor
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

U-775 Motor Base Electroplating Fixed Mounting Seat Support Bracket Replacement
Features:
*100% brand new and high quality
*Fit to mini 775 engine as support or support.
*The U-type and standard-type motor mount, which adopts the electroplating process, has a good anti-rust effect.
*775 fixed motors in a firm manner, convenient to use the saw blade.
*Made of high quality mental material, resistant and durable in use.
*This engine mount comes with nuts and bolts, convenient for mounting and fixing the engine
Specifications:
*Color: Black (As Pictures Show)
*Material: Iron
*Type: U-shaped / standard
*Surface: electroplating
*Vertical surface: thickness 3mm, height 40mm, width 50mm (Approx.)
*Base plate: length 60mm, thickness 3mm, width 50mm (Approx.)
*Center U slot: diameter is about 17.5mm (775 motor step is smaller than the motor with this aperture)
*Motor mounting hole (Approx.): 4mm (suitable for M4 screw)
*Applicable to the mini 775 engine as a stand or bracket
Package Contents:
1*Bracket
6*Nuts
6*Screws
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Precision miniature DC3V Reducer Motor 1-4 Stage 1pc Precision Durable
Features:
100% brand new and high quality
It has the characteristics of high rigidity, high precision, high transmission efficiency (single-stage 97-98% ), high torque/volume ratio, etc.
Most are installed on stepper motors and servo motors to reduce RPM, increase torque and match inertia.
Robust, long life, corrosion resistant, suitable for a variety of environments.
Stable performance, good consistency, low noise, high torque.
Good wear resistance, high temperature resistance and impact resistance.
Specification:
Project Type: Geared Motor
Material: metal
Optional types: One Stage, Two Stage, Three Stage, Four Stage
6mm first-level geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 6420±120RPM
Torque used: 5g.cm
Transmission ratio: 5.14:1
No-load noise: <48DB
6mm two-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 1200±120RPM
Torque used: 27g.cm
Transmission ratio: 26.45
No-load noise: <48DB
6mm three-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 230MA max
Blocking current: ≤200MA
Output speed: 242±120RPM
Torque used: 120g.cm
Transmission ratio: 136.02
No-load noise: <48DB
6mm four-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤0.5DVC
No-load current: maximum 200MA
Blocking current: ≤200MA
Output speed: 46±5RPM
Torque used: 180g.cm
Transmission ratio: 699.5
No-load noise: <48DB
Packing list:
1 * Geared motor
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Precision miniature DC3V Reducer Motor 1-4 Stage 1pc Precision Durable
Features:
100% brand new and high quality
It has the characteristics of high rigidity, high precision, high transmission efficiency (single-stage 97-98% ), high torque/volume ratio, etc.
Most are installed on stepper motors and servo motors to reduce RPM, increase torque and match inertia.
Robust, long life, corrosion resistant, suitable for a variety of environments.
Stable performance, good consistency, low noise, high torque.
Good wear resistance, high temperature resistance and impact resistance.
Specification:
Project Type: Geared Motor
Material: metal
Optional types: One Stage, Two Stage, Three Stage, Four Stage
6mm first-level geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 6420±120RPM
Torque used: 5g.cm
Transmission ratio: 5.14:1
No-load noise: <48DB
6mm two-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 1200±120RPM
Torque used: 27g.cm
Transmission ratio: 26.45
No-load noise: <48DB
6mm three-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 230MA max
Blocking current: ≤200MA
Output speed: 242±120RPM
Torque used: 120g.cm
Transmission ratio: 136.02
No-load noise: <48DB
6mm four-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤0.5DVC
No-load current: maximum 200MA
Blocking current: ≤200MA
Output speed: 46±5RPM
Torque used: 180g.cm
Transmission ratio: 699.5
No-load noise: <48DB
Packing list:
1 * Geared motor
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Precision miniature DC3V Reducer Motor 1-4 Stage 1pc Precision Durable
Features:
100% brand new and high quality
It has the characteristics of high rigidity, high precision, high transmission efficiency (single-stage 97-98% ), high torque/volume ratio, etc.
Most are installed on stepper motors and servo motors to reduce RPM, increase torque and match inertia.
Robust, long life, corrosion resistant, suitable for a variety of environments.
Stable performance, good consistency, low noise, high torque.
Good wear resistance, high temperature resistance and impact resistance.
Specification:
Project Type: Geared Motor
Material: metal
Optional types: One Stage, Two Stage, Three Stage, Four Stage
6mm first-level geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 6420±120RPM
Torque used: 5g.cm
Transmission ratio: 5.14:1
No-load noise: <48DB
6mm two-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 1200±120RPM
Torque used: 27g.cm
Transmission ratio: 26.45
No-load noise: <48DB
6mm three-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 230MA max
Blocking current: ≤200MA
Output speed: 242±120RPM
Torque used: 120g.cm
Transmission ratio: 136.02
No-load noise: <48DB
6mm four-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤0.5DVC
No-load current: maximum 200MA
Blocking current: ≤200MA
Output speed: 46±5RPM
Torque used: 180g.cm
Transmission ratio: 699.5
No-load noise: <48DB
Packing list:
1 * Geared motor
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Precision miniature DC3V Reducer Motor 1-4 Stage 1pc Precision Durable
Features:
100% brand new and high quality
It has the characteristics of high rigidity, high precision, high transmission efficiency (single-stage 97-98% ), high torque/volume ratio, etc.
Most are installed on stepper motors and servo motors to reduce RPM, increase torque and match inertia.
Robust, long life, corrosion resistant, suitable for a variety of environments.
Stable performance, good consistency, low noise, high torque.
Good wear resistance, high temperature resistance and impact resistance.
Specification:
Project Type: Geared Motor
Material: metal
Optional types: One Stage, Two Stage, Three Stage, Four Stage
6mm first-level geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 6420±120RPM
Torque used: 5g.cm
Transmission ratio: 5.14:1
No-load noise: <48DB
6mm two-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 1200±120RPM
Torque used: 27g.cm
Transmission ratio: 26.45
No-load noise: <48DB
6mm three-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 230MA max
Blocking current: ≤200MA
Output speed: 242±120RPM
Torque used: 120g.cm
Transmission ratio: 136.02
No-load noise: <48DB
6mm four-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤0.5DVC
No-load current: maximum 200MA
Blocking current: ≤200MA
Output speed: 46±5RPM
Torque used: 180g.cm
Transmission ratio: 699.5
No-load noise: <48DB
Packing list:
1 * Geared motor
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Set Gear Motor Kit 2pcs Small Speed 50mA High Torque Less Noise Durable
Detail:
*Gear Motor, high stability and low speed.
*Full metal gears ensures a longer service life, high torque and less noise.
*Easy to install and use.
*Item Condition:100% Brand New
*Color: As Pictures Show
*No-load speed: 21RPM
*No-load current: 50mA
*Input voltage:3-9V
*Rated voltage:6V
Package Contents:
2*Gear Motor
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Features:
100% brand new and high quality
It has the characteristics of high rigidity, high precision, high transmission efficiency (single-stage 97-98% ), high torque/volume ratio, etc.
Most are installed on stepper motors and servo motors to reduce RPM, increase torque and match inertia.
Robust, long life, corrosion resistant, suitable for a variety of environments.
Stable performance, good consistency, low noise, high torque.
Good wear resistance, high temperature resistance and impact resistance.
Specification:
Project Type: Geared Motor
Material: metal
Optional types: One Stage, Two Stage, Three Stage, Four Stage
6mm first-level geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 6420±120RPM
Torque used: 5g.cm
Transmission ratio: 5.14:1
No-load noise: <48DB
6mm two-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 1200±120RPM
Torque used: 27g.cm
Transmission ratio: 26.45
No-load noise: <48DB
6mm three-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 230MA max
Blocking current: ≤200MA
Output speed: 242±120RPM
Torque used: 120g.cm
Transmission ratio: 136.02
No-load noise: <48DB
6mm four-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤0.5DVC
No-load current: maximum 200MA
Blocking current: ≤200MA
Output speed: 46±5RPM
Torque used: 180g.cm
Transmission ratio: 699.5
No-load noise: <48DB
Packing list:
1 * Geared motor
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Features:
100% brand new and high quality
It has the characteristics of high rigidity, high precision, high transmission efficiency (single-stage 97-98% ), high torque/volume ratio, etc.
Most are installed on stepper motors and servo motors to reduce RPM, increase torque and match inertia.
Robust, long life, corrosion resistant, suitable for a variety of environments.
Stable performance, good consistency, low noise, high torque.
Good wear resistance, high temperature resistance and impact resistance.
Specification:
Project Type: Geared Motor
Material: metal
Optional types: One Stage, Two Stage, Three Stage, Four Stage
6mm first-level geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 6420±120RPM
Torque used: 5g.cm
Transmission ratio: 5.14:1
No-load noise: <48DB
6mm two-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 1200±120RPM
Torque used: 27g.cm
Transmission ratio: 26.45
No-load noise: <48DB
6mm three-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 230MA max
Blocking current: ≤200MA
Output speed: 242±120RPM
Torque used: 120g.cm
Transmission ratio: 136.02
No-load noise: <48DB
6mm four-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤0.5DVC
No-load current: maximum 200MA
Blocking current: ≤200MA
Output speed: 46±5RPM
Torque used: 180g.cm
Transmission ratio: 699.5
No-load noise: <48DB
Packing list:
1 * Geared motor
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Features:
100% brand new and high quality
It has the characteristics of high rigidity, high precision, high transmission efficiency (single-stage 97-98% ), high torque/volume ratio, etc.
Most are installed on stepper motors and servo motors to reduce RPM, increase torque and match inertia.
Robust, long life, corrosion resistant, suitable for a variety of environments.
Stable performance, good consistency, low noise, high torque.
Good wear resistance, high temperature resistance and impact resistance.
Specification:
Project Type: Geared Motor
Material: metal
Optional types: One Stage, Two Stage, Three Stage, Four Stage
6mm first-level geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 6420±120RPM
Torque used: 5g.cm
Transmission ratio: 5.14:1
No-load noise: <48DB
6mm two-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 1200±120RPM
Torque used: 27g.cm
Transmission ratio: 26.45
No-load noise: <48DB
6mm three-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 230MA max
Blocking current: ≤200MA
Output speed: 242±120RPM
Torque used: 120g.cm
Transmission ratio: 136.02
No-load noise: <48DB
6mm four-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤0.5DVC
No-load current: maximum 200MA
Blocking current: ≤200MA
Output speed: 46±5RPM
Torque used: 180g.cm
Transmission ratio: 699.5
No-load noise: <48DB
Packing list:
1 * Geared motor
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Features:
100% brand new and high quality
It has the characteristics of high rigidity, high precision, high transmission efficiency (single-stage 97-98% ), high torque/volume ratio, etc.
Most are installed on stepper motors and servo motors to reduce RPM, increase torque and match inertia.
Robust, long life, corrosion resistant, suitable for a variety of environments.
Stable performance, good consistency, low noise, high torque.
Good wear resistance, high temperature resistance and impact resistance.
Specification:
Project Type: Geared Motor
Material: metal
Optional types: One Stage, Two Stage, Three Stage, Four Stage
6mm first-level geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 6420±120RPM
Torque used: 5g.cm
Transmission ratio: 5.14:1
No-load noise: <48DB
6mm two-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 1200±120RPM
Torque used: 27g.cm
Transmission ratio: 26.45
No-load noise: <48DB
6mm three-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 230MA max
Blocking current: ≤200MA
Output speed: 242±120RPM
Torque used: 120g.cm
Transmission ratio: 136.02
No-load noise: <48DB
6mm four-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤0.5DVC
No-load current: maximum 200MA
Blocking current: ≤200MA
Output speed: 46±5RPM
Torque used: 180g.cm
Transmission ratio: 699.5
No-load noise: <48DB
Packing list:
1 * Geared motor
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Features:
100% brand new and high quality
It has the characteristics of high rigidity, high precision, high transmission efficiency (single-stage 97-98% ), high torque/volume ratio, etc.
Most are installed on stepper motors and servo motors to reduce RPM, increase torque and match inertia.
Robust, long life, corrosion resistant, suitable for a variety of environments.
Stable performance, good consistency, low noise, high torque.
Good wear resistance, high temperature resistance and impact resistance.
Specification:
Project Type: Geared Motor
Material: metal
Optional types: One Stage, Two Stage, Three Stage, Four Stage
6mm first-level geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 6420±120RPM
Torque used: 5g.cm
Transmission ratio: 5.14:1
No-load noise: <48DB
6mm two-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 1200±120RPM
Torque used: 27g.cm
Transmission ratio: 26.45
No-load noise: <48DB
6mm three-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 230MA max
Blocking current: ≤200MA
Output speed: 242±120RPM
Torque used: 120g.cm
Transmission ratio: 136.02
No-load noise: <48DB
6mm four-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤0.5DVC
No-load current: maximum 200MA
Blocking current: ≤200MA
Output speed: 46±5RPM
Torque used: 180g.cm
Transmission ratio: 699.5
No-load noise: <48DB
Packing list:
1 * Geared motor
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Features:
100% brand new and high quality
It has the characteristics of high rigidity, high precision, high transmission efficiency (single-stage 97-98% ), high torque/volume ratio, etc.
Most are installed on stepper motors and servo motors to reduce RPM, increase torque and match inertia.
Robust, long life, corrosion resistant, suitable for a variety of environments.
Stable performance, good consistency, low noise, high torque.
Good wear resistance, high temperature resistance and impact resistance.
Specification:
Project Type: Geared Motor
Material: metal
Optional types: One Stage, Two Stage, Three Stage, Four Stage
6mm first-level geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 6420±120RPM
Torque used: 5g.cm
Transmission ratio: 5.14:1
No-load noise: <48DB
6mm two-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 1200±120RPM
Torque used: 27g.cm
Transmission ratio: 26.45
No-load noise: <48DB
6mm three-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 230MA max
Blocking current: ≤200MA
Output speed: 242±120RPM
Torque used: 120g.cm
Transmission ratio: 136.02
No-load noise: <48DB
6mm four-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤0.5DVC
No-load current: maximum 200MA
Blocking current: ≤200MA
Output speed: 46±5RPM
Torque used: 180g.cm
Transmission ratio: 699.5
No-load noise: <48DB
Packing list:
1 * Geared motor
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Features:
100% brand new and high quality
It has the characteristics of high rigidity, high precision, high transmission efficiency (single-stage 97-98% ), high torque/volume ratio, etc.
Most are installed on stepper motors and servo motors to reduce RPM, increase torque and match inertia.
Robust, long life, corrosion resistant, suitable for a variety of environments.
Stable performance, good consistency, low noise, high torque.
Good wear resistance, high temperature resistance and impact resistance.
Specification:
Project Type: Geared Motor
Material: metal
Optional types: One Stage, Two Stage, Three Stage, Four Stage
6mm first-level geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 6420±120RPM
Torque used: 5g.cm
Transmission ratio: 5.14:1
No-load noise: <48DB
6mm two-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 1200±120RPM
Torque used: 27g.cm
Transmission ratio: 26.45
No-load noise: <48DB
6mm three-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 230MA max
Blocking current: ≤200MA
Output speed: 242±120RPM
Torque used: 120g.cm
Transmission ratio: 136.02
No-load noise: <48DB
6mm four-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤0.5DVC
No-load current: maximum 200MA
Blocking current: ≤200MA
Output speed: 46±5RPM
Torque used: 180g.cm
Transmission ratio: 699.5
No-load noise: <48DB
Packing list:
1 * Geared motor
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Features:
100% brand new and high quality
It has the characteristics of high rigidity, high precision, high transmission efficiency (single-stage 97-98% ), high torque/volume ratio, etc.
Most are installed on stepper motors and servo motors to reduce RPM, increase torque and match inertia.
Robust, long life, corrosion resistant, suitable for a variety of environments.
Stable performance, good consistency, low noise, high torque.
Good wear resistance, high temperature resistance and impact resistance.
Specification:
Project Type: Geared Motor
Material: metal
Optional types: One Stage, Two Stage, Three Stage, Four Stage
6mm first-level geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 6420±120RPM
Torque used: 5g.cm
Transmission ratio: 5.14:1
No-load noise: <48DB
6mm two-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 50MA
Blocking current: ≤230MA
Output speed: 1200±120RPM
Torque used: 27g.cm
Transmission ratio: 26.45
No-load noise: <48DB
6mm three-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤1DVC
No-load current: 230MA max
Blocking current: ≤200MA
Output speed: 242±120RPM
Torque used: 120g.cm
Transmission ratio: 136.02
No-load noise: <48DB
6mm four-stage geared motor parameters:
Rated voltage: 3.0V DC
Starting voltage: ≤0.5DVC
No-load current: maximum 200MA
Blocking current: ≤200MA
Output speed: 46±5RPM
Torque used: 180g.cm
Transmission ratio: 699.5
No-load noise: <48DB
Packing list:
1 * Geared motor
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

DC 3-9V 9-32RPM Slow Speed DIY Worm Small Gear Motor Reduction Box Gearmotor
Detail:
*Gear Motor, high stability and low speed.
*Full metal gears ensures a longer service life, high torque and less noise.
*Easy to install and use.
*Item Condition:100% Brand New
*Color: As Pictures Show
*No-load speed: 21RPM
*No-load current: 50mA
*Input voltage:3-9V
*Rated voltage:6V
Package Contents:
2*Gear Motor
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Bling Car Decor Crystal Ball Pendant Charms Rear View Mirror Hanging Ornament
Bling Car Decor Crystal Ball Pendant Charms Rear View Mirror Hanging Ornament
Features:
* 100% brand new and high quality.
* Crystal ball car pendant, not easy to damage. Tarnishing and requires minimal maintenance in order to keep it looking like new.
* Multiple scenarios apply.
* Bling bling crystal ball, good for your car decoration. Suit for collection, gift, casual use.
* Suitable for car pendant, car rearview mirror ornament. Beautiful decorative hanging ornament.
* Small pendant, no impact on driving sight.
* Best wish.The best gift you can think of, perfect gift for any occasions that will surely make a memorable impression.
* Car Decor - make your car sparkle with this bling bling crystal ball hanging ornament charms. it is a dazzling sun catcher, beautiful decor.
* Rhinestone Meterial - high quality and not easy to be damaged, and can keep looking like new always.
Specification:
* Size: Pendant:3.5cm=1.37"(Diameter), Necklace:45cm=17.7"(L)
* Material: Metal Rhinestone
* Net Weight: 40g
* Color:Colorful
Package Contents:
1pc Crystal Ball Pendant Necklace
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.