Tesztberendezés alkatrészei és tartozékai

 
       
 
Abt this item : High Quality Dustproof Plug For iPhone Smart Phone Anti Dust plug 3.5mm Earphone Jack & Sim Card Needle Mobile Phone Tool Tray.
 
Specifications:
1. 2 in 1, universal 2.5mm earphone jack dust plug Sim card needle.
2. Stainless metal Gold & Silver electroplated.
3. universal for all smart phone.
 
 
What you will get :
Dust Plug With Ejact Pin X 1
 
 
 
      
     
 
 
 
 

 
       
 
Abt this item : High Quality Dustproof Plug For iPhone Smart Phone Anti Dust plug 3.5mm Earphone Jack & Sim Card Needle Mobile Phone Tool Tray.
 
Specifications:
1. 2 in 1, universal 2.5mm earphone jack dust plug Sim card needle.
2. Stainless metal Gold & Silver electroplated.
3. universal for all smart phone.
 
 
What you will get :
Dust Plug With Ejact Pin X 1
 
 
 
      
     
 
 
 
 

1PC High Speed 30cm/1FT 2 Dual Port USB A Female to Internal 9 Pin Header Adapter PCB Motherboard Cable for PC MainBoard
 
 
Features:
- 100% Brand New, never used
- Length: 1ft/30cm
- Color: Black
- 9 pin header to female USB A socket cable.
- These cables can be used to convert two standard USB 2.0 sockets into a single 9 pin header.
  The 9 pin header can be configured as either male or female.
  One end of the cable has TWO USB A Jacks.  These can be connected to any free USB 2.0 sockets on your system.  
  They can also be connected to the ports on a USB 2.0 hub.
  The other end of the cable has a single female 2x5 way pin header connector.
 
Package Included:
1 x      PCB Mainboard 9 Pin Header to 2 Dual USB 2.0 Female Adapter Cable       
 

2PCS Silicone Earphone Case Ear Wings Hook Cap Earhook Cases For Apple iphone Airpods Earbuds Cover For iphone
 
Package:
2pcs Earphone Case  (1Left  1 Right) .(not include retail box)

2PCS Silicone Earphone Case Ear Wings Hook Cap Earhook Cases For Apple iphone Airpods Earbuds Cover For iphone
 
Package:
2pcs Earphone Case  (1Left  1 Right) .(not include retail box)

2PCS Silicone Earphone Case Ear Wings Hook Cap Earhook Cases For Apple iphone Airpods Earbuds Cover For iphone
 
Package:
2pcs Earphone Case  (1Left  1 Right) .(not include retail box)

2PCS Silicone Earphone Case Ear Wings Hook Cap Earhook Cases For Apple iphone Airpods Earbuds Cover For iphone
 
Package:
2pcs Earphone Case  (1Left  1 Right) .(not include retail box)

2PCS Silicone Earphone Case Ear Wings Hook Cap Earhook Cases For Apple iphone Airpods Earbuds Cover For iphone
 
Package:
2pcs Earphone Case  (1Left  1 Right) .(not include retail box)

2PCS Silicone Earphone Case Ear Wings Hook Cap Earhook Cases For Apple iphone Airpods Earbuds Cover For iphone
 
Package:
2pcs Earphone Case  (1Left  1 Right) .(not include retail box)

2PCS Silicone Earphone Case Ear Wings Hook Cap Earhook Cases For Apple iphone Airpods Earbuds Cover For iphone
 
Package:
2pcs Earphone Case  (1Left  1 Right) .(not include retail box)

2PCS Silicone Earphone Case Ear Wings Hook Cap Earhook Cases For Apple iphone Airpods Earbuds Cover For iphone
 
Package:
2pcs Earphone Case  (1Left  1 Right) .(not include retail box)

Features:
XLR 3-Pin Male Connectors
These hookups are balanced, which helps cut out noise and hum pickup.
A balanced line consists of three paths of current flow,
using a cable consisting of a pair of twisted wires with a shield covering them.
Perfect for making your own or upgrading old microphone cables.
These connectors requires soldering!
Specifications:
Size:65*18mm
Color:Black Silver
Packing content:
1 x XLR 3-Pin Male Connectors

(1)Compatibility is strong, a variety of magnetic mobile phone support can be used on the market
(2)Super strong magnetic, does not affect the mobile phone signal
 
 
Package Included:
 
2x Metal Plate
 
 

(1)Compatibility is strong, a variety of magnetic mobile phone support can be used on the market
(2)Super strong magnetic, does not affect the mobile phone signal
 
 
Package Included:
 
2x Metal Plate
 
 

(1)Compatibility is strong, a variety of magnetic mobile phone support can be used on the market
(2)Super strong magnetic, does not affect the mobile phone signal
 
 
Package Included:
 
2x Metal Plate
 
 

(1)Compatibility is strong, a variety of magnetic mobile phone support can be used on the market
(2)Super strong magnetic, does not affect the mobile phone signal
 
 
Package Included:
 
2x Metal Plate
 
 

(1)Compatibility is strong, a variety of magnetic mobile phone support can be used on the market
(2)Super strong magnetic, does not affect the mobile phone signal
 
 
Package Included:
 
2x Metal Plate
 
 

Note
1. This cable is 3 in 1 universal usb cables, for iPhone 4 iPhone 5 iPhone 6 7 /Samsung V8 android phone
2. The length is 20-2cm
3. The price not include charger

Condision:100% Brand New.Designed for perfect fit with the LCD screen.
Highly transparent, Anti-dust, Anti-scratch . so don\'t worry that will effect your viewing .
Protect your phone front LCD screen against dust and scratches and eliminate glare.
Offers tough, durable, transparent surface while keeping the LCD screen clean and unscratched.
Attaches smoothly with self-adhering surface; leaves no residue when removed.
 
Instructions for 4 layers Screen Protectors:
1. Thoroughly Clean your screen.
2. Peel back the layer labeled "1" an inch or so, apply guard starting at one side of your screen.
3. Using a credit card, or similar, smooth out bubbles as you lay down the guard on the screen.
4. Slowly Remove layer labeled "2" and you\'re done!
 
Package:
10pcs Front Screen Protector (WITHOUT Retail BOX),NOT Included mobile phone.
10pcs Cleaning Cloth
 
 
 
 
 
 
 

Condision:100% Brand New.Designed for perfect fit with the LCD screen.
Highly transparent, Anti-dust, Anti-scratch . so don\'t worry that will effect your viewing .
Protect your phone front LCD screen against dust and scratches and eliminate glare.
Offers tough, durable, transparent surface while keeping the LCD screen clean and unscratched.
Attaches smoothly with self-adhering surface; leaves no residue when removed.
 
Instructions for 4 layers Screen Protectors:
1. Thoroughly Clean your screen.
2. Peel back the layer labeled "1" an inch or so, apply guard starting at one side of your screen.
3. Using a credit card, or similar, smooth out bubbles as you lay down the guard on the screen.
4. Slowly Remove layer labeled "2" and you\'re done!
 
Package:
10pcs Front Screen Protector (WITHOUT Retail BOX),NOT Included mobile phone.
10pcs Cleaning Cloth
 
 
 
 
 
 
 

Packing:5pcs Metal Phone Holder 

Package include
5pcs WH148 Potentiometer with Cap
Note：The cap color is sent randomly

Package include
5pcs WH148 Potentiometer with Cap
Note：The cap color is sent randomly

Package include
5pcs WH148 Potentiometer with Cap
Note：The cap color is sent randomly

Package include
5pcs WH148 Potentiometer with Cap
Note：The cap color is sent randomly

Package include
5pcs WH148 Potentiometer with Cap
Note：The cap color is sent randomly

Package include
5pcs WH148 Potentiometer with Cap
Note：The cap color is sent randomly

Package include
5pcs WH148 Potentiometer with Cap
Note：The cap color is sent randomly

Package include
5pcs WH148 Potentiometer with Cap
Note：The cap color is sent randomly

Package include
5pcs WH148 Potentiometer with Cap
Note：The cap color is sent randomly

Package include
5pcs WH148 Potentiometer with Cap
Note：The cap color is sent randomly

MH-Z19B
MH-Z19B carbon dioxide gas sensor (hereinafter referred to as the sensor) is a general-purpose smart small-scale sensor that uses non-dispersive infrared (NDIR) principle to detect the presence of CO2 in the air, with good selectivity and anaerobic Gas dependence, long life and other characteristics; built-in temperature compensation; at the same time with serial output, analog output and PWM output, easy to use. The sensor is a high-performance sensor that combines mature infrared absorption gas detection technology with precise optical path design and sophisticated circuit design.
Parameters:
Product model number: MH-Z19B
Gas Detection: Carbon Dioxide
Supply voltage: 4.5~5.5V DC
Average current: <20mA (@5V power supply)
Peak current: 150 mA (@5V supply)
Interface level: 3.3V (5V compatible)
Measurement range: 0~10000ppm can be selected within the range
Warm-up time: 3min
Response time: T90<120s
Working temperature: 0～50°C
Operating Humidity: 0 to 95% RH (non-condensing)
Characteristics:
Gas chamber with gold plating, waterproof and corrosion resistant
High sensitivity, low power consumption
Excellent stability
Temperature compensation, excellent linear output
Provides serial (UART), analog (DAC), PWM waveform output methods
long lasting
Water vapor interference, not poisoning
Application:
HVAC refrigeration equipment
Air quality monitoring equipment
Fresh air system
Air purification equipment
Smart home
SCHOOL
Vin: Power Positive (Vin)
GND: Negative Power Supply (GND)
Vo: Analog output
PWM: PWM
HD: HD (zero for school, low for more than 7 seconds)
Rx: UART(RXD) TTL Level Data Input
Tx: UART (TXD) TTL level data output
Pin 1: Analog Output Vo
Pin 2: None
Pin 3: Negative Power Supply (GND)
Pin 4: Positive Power Supply (Vin)
Pin 5: UART(RXD) TTL Level Data Input
Pin 6: UART (TXD) TTL Level Data Output
Pin 7: None
MH-Z19C
The MH-Z19C carbon dioxide gas sensor (hereinafter referred to as the sensor) is a general-purpose intelligent small sensor that uses the principle of non-dispersive infrared (NDIR) to detect the presence of C02 in the air. And other features; built-in temperature compensation: simultaneously has serial output, PWM output, easy to use. The sensor is a high-performance sensor made by closely combining mature infrared absorption gas detection technology with sophisticated optical circuit design and sophisticated circuit design.
Product parameters:
Detection gas: carbon dioxide
Power supply voltage: DC (5.0 ± 0.1) V
Average current: <40mA (@5V power supply)
Peak current: 125 to (@5V power supply)
Interface level: 3. 3v (compatible with 5v)
Measuring range: 400-5000PPM optional
Output signal: serial UART (TL level 3.3V)
Warm-up time: 1min
Response time: T90< 120s
Working temperature: -10-50degree
Working humidity: 0~95% RH (no condensation)
Pin description:
Vin: Power (in)
GND: power supply-(GND)
PWM: PWM
Hd: HD (zero calibration, low level is effective for more than 7 seconds)
Rx: UART (RXD) TTL level data input
Tx: UART (TXD) TTL level data output
Output method:
PWM output
Assume the measurement range is 400-2000ppm
CO2: Concentration output range: 400-2000ppm
Period: 1004ms±5%
High level output at the beginning of the cycle: 2ms (theoretical value)
Central period: 1000ms±5%
Low level output at the end of the period: 2ms (theoretical value)
Calculation formula for obtaining current CO2 concentration value by PWM: Cppm=2000X (TH-2ms)/(TH TL-4ms)
Cppm: CO2 concentration value calculated by the unit of ppm
TH: the time when the output is high level in one output cycle
TL: the time when the output is low in one output cycle
Serial output (UART)
Hardware connection, connect the sensor's Vin-GND-RXD-TXD to the user's 5V-GND-TXD-RXD. (User terminal must use TTL level)
Precautions:
1. In the process of welding, installation and use of the sensor, the gold-plated plastic cavity should be prevented from withstanding pressure in any direction.
2. If the sensor needs to be placed in a small space, this space should be well ventilated, especially the two diffusion windows should be in a well ventilated position.
3. The sensor should be far away from the heat source, and avoid direct sunlight or other heat radiation.
4. The sensor should be calibrated regularly, and the calibration period is recommended to be no more than 6 months.
5. Do not use the sensor for a long time in the environment with high dust density.
6. In order to ensure that the sensor can work normally, the power supply voltage must be maintained at (5.0 ± 0.1) VDC. The power supply current must not be less than 150mA
7. If it is not within this range, the sensor may be faulty, the output concentration of the sensor is low or the sensor cannot work normally.
8. When manually calibrating the zero point or sending the command to calibrate the main points, it must be stable
9. Work continuously for more than 20 minutes in a gas environment (400ppm).
10. The sensor is prohibited to use wave peak depth.
11. When welding with iron, set the temperature to (350±5) degree, early
12. The pick-up time must be less than 35.
13. When using the sensor, it is recommended that the customer use the method of inserting the solder bump to directly insert and remove the sensor for toilet maintenance.

MH-Z19B
MH-Z19B carbon dioxide gas sensor (hereinafter referred to as the sensor) is a general-purpose smart small-scale sensor that uses non-dispersive infrared (NDIR) principle to detect the presence of CO2 in the air, with good selectivity and anaerobic Gas dependence, long life and other characteristics; built-in temperature compensation; at the same time with serial output, analog output and PWM output, easy to use. The sensor is a high-performance sensor that combines mature infrared absorption gas detection technology with precise optical path design and sophisticated circuit design.
Parameters:
Product model number: MH-Z19B
Gas Detection: Carbon Dioxide
Supply voltage: 4.5~5.5V DC
Average current: <20mA (@5V power supply)
Peak current: 150 mA (@5V supply)
Interface level: 3.3V (5V compatible)
Measurement range: 0~10000ppm can be selected within the range
Warm-up time: 3min
Response time: T90<120s
Working temperature: 0～50°C
Operating Humidity: 0 to 95% RH (non-condensing)
Characteristics:
Gas chamber with gold plating, waterproof and corrosion resistant
High sensitivity, low power consumption
Excellent stability
Temperature compensation, excellent linear output
Provides serial (UART), analog (DAC), PWM waveform output methods
long lasting
Water vapor interference, not poisoning
Application:
HVAC refrigeration equipment
Air quality monitoring equipment
Fresh air system
Air purification equipment
Smart home
SCHOOL
Vin: Power Positive (Vin)
GND: Negative Power Supply (GND)
Vo: Analog output
PWM: PWM
HD: HD (zero for school, low for more than 7 seconds)
Rx: UART(RXD) TTL Level Data Input
Tx: UART (TXD) TTL level data output
Pin 1: Analog Output Vo
Pin 2: None
Pin 3: Negative Power Supply (GND)
Pin 4: Positive Power Supply (Vin)
Pin 5: UART(RXD) TTL Level Data Input
Pin 6: UART (TXD) TTL Level Data Output
Pin 7: None
MH-Z19C
The MH-Z19C carbon dioxide gas sensor (hereinafter referred to as the sensor) is a general-purpose intelligent small sensor that uses the principle of non-dispersive infrared (NDIR) to detect the presence of C02 in the air. And other features; built-in temperature compensation: simultaneously has serial output, PWM output, easy to use. The sensor is a high-performance sensor made by closely combining mature infrared absorption gas detection technology with sophisticated optical circuit design and sophisticated circuit design.
Product parameters:
Detection gas: carbon dioxide
Power supply voltage: DC (5.0 ± 0.1) V
Average current: <40mA (@5V power supply)
Peak current: 125 to (@5V power supply)
Interface level: 3. 3v (compatible with 5v)
Measuring range: 400-5000PPM optional
Output signal: serial UART (TL level 3.3V)
Warm-up time: 1min
Response time: T90< 120s
Working temperature: -10-50degree
Working humidity: 0~95% RH (no condensation)
Pin description:
Vin: Power (in)
GND: power supply-(GND)
PWM: PWM
Hd: HD (zero calibration, low level is effective for more than 7 seconds)
Rx: UART (RXD) TTL level data input
Tx: UART (TXD) TTL level data output
Output method:
PWM output
Assume the measurement range is 400-2000ppm
CO2: Concentration output range: 400-2000ppm
Period: 1004ms±5%
High level output at the beginning of the cycle: 2ms (theoretical value)
Central period: 1000ms±5%
Low level output at the end of the period: 2ms (theoretical value)
Calculation formula for obtaining current CO2 concentration value by PWM: Cppm=2000X (TH-2ms)/(TH TL-4ms)
Cppm: CO2 concentration value calculated by the unit of ppm
TH: the time when the output is high level in one output cycle
TL: the time when the output is low in one output cycle
Serial output (UART)
Hardware connection, connect the sensor's Vin-GND-RXD-TXD to the user's 5V-GND-TXD-RXD. (User terminal must use TTL level)
Precautions:
1. In the process of welding, installation and use of the sensor, the gold-plated plastic cavity should be prevented from withstanding pressure in any direction.
2. If the sensor needs to be placed in a small space, this space should be well ventilated, especially the two diffusion windows should be in a well ventilated position.
3. The sensor should be far away from the heat source, and avoid direct sunlight or other heat radiation.
4. The sensor should be calibrated regularly, and the calibration period is recommended to be no more than 6 months.
5. Do not use the sensor for a long time in the environment with high dust density.
6. In order to ensure that the sensor can work normally, the power supply voltage must be maintained at (5.0 ± 0.1) VDC. The power supply current must not be less than 150mA
7. If it is not within this range, the sensor may be faulty, the output concentration of the sensor is low or the sensor cannot work normally.
8. When manually calibrating the zero point or sending the command to calibrate the main points, it must be stable
9. Work continuously for more than 20 minutes in a gas environment (400ppm).
10. The sensor is prohibited to use wave peak depth.
11. When welding with iron, set the temperature to (350±5) degree, early
12. The pick-up time must be less than 35.
13. When using the sensor, it is recommended that the customer use the method of inserting the solder bump to directly insert and remove the sensor for toilet maintenance.

Spezifikation:
Modell: GT-24
Modul größe: 30,3 × 14,5mm (einschließlich PCB antenne)
Betriebs frequenz b und: 2,4 GHz ~ 2,525 GHz (einstellbar, 1 MHz schritt)
Interface modus: 1*8*1,27mm/2*4*2,54mm (Die patch kann auch verwendet werden mit die universal board und DuPont linie)
Versorgung spannung: DC 2,0-3,6 V (Hinweis: über 3,6 V, die modul dauerhaft beschädigt werden)
Kommunikation ebene: 0.7VCC ~ 3,3 V (VCC bezieht sich auf die modul versorgung spannung)
Gemessen abstand: 1000 m (klar offenen raum, maximale leistung, höhe 2 m, 250 k luft geschwindigkeit)
Übertragen power: 4 stufen einstellbare (maximale 20dBm, ca.. 100 mW bei maximale leistung)
Luft geschwindigkeit 250 k ~ 2 Mbps/3 stufen einstellbare (250 kbps, 1 Mbps, 2 Mbps)
Abschaltung strom: ca.. 30uA (test zustand: CE = 0, power-down modus, VDD = 3,0 V)
Emissions strom: über 90mA (power versorgung kapazität muss größer als 250 m)
Empfangen strom: über 20mA
Antenne form: PCB antenne/ipex träger antenne
Kommunikation interface: SPI maximale geschwindigkeit bis zu 10 Mbps
Übertragen länge: Einzel paket 1 ~ 32 bytes Ebene 3 FIFO
Empfangen länge: Einzel paket 1 ~ 32 bytes Ebene 3 FIFO
RSSI unterstützung: Nicht unterstützt (nur einfache paket verlust statistiken sind unterstützt)
Empfangen empfindlichkeit:-94dBm @ 250kbp
Arbeits temperatur:-40 ~ 85 °C (industrie grade)
Lagerung temperatur:-40 ~ 125 °C (industrie grade)
Eigenschaften:
-Die GT-24 modul ist ein 2,4 GHz, 100 mW, hohe geschwindigkeit (bis zu 2 Mbps fluggeschwindigkeit), hohe stabilität, industrie grade wireless transceiver integrierte daten übertragung modul.
-Das modul kommt mit einem high-leistung PCB antenne, präzise impedanz passenden, und die nRF24L01P RF chip, die hat höhere zuverlässigkeit, mehr power ebenen, und mehr übertragung abstand und geringeren strom als die nRF24L01.
-Auch eingebaute RFX2401 power verstärker chip, eingebaute LNA, erhalt empfindlichkeit erhöht durch 10dBm, arbeiten in der ISM b und von 2,4 GHz ~ 2,5 GHz.
-Das modul hat ausreichende übertragen power, gute spektrale eigenschaften, kleine oberwellen, kleine kanal übersprechen, und ultra-kleine größe. Es ist ein modell von alle Murata raw materialien und industrie grade standards.
-Es hat eine standard abstand von 2,54mm in-line interface und 1,27mm patch interface, die ist bequem für benutzer zu verwenden mit verschiedenen schaltungen.
-Die GT--24 modul kommt auch mit einem eingebauten PCB antenne und eine ipx träger externe antenne, die stark verbessert die modul der freies eigenschaften und gibt dem benutzer die größte freiheit.

Mini Solderless Breadboard
1 Terminal Strip
Tie-point 170
ABS plastic material
Completely reusable
Coloured coordinates for easy component placement
Phosphor bronze nickel plated spring clips
Accepts a variety of wire sizes (29-20 AWG)
Dimensions: 45x34.5x8.5mm
Color: Black, white,blue,green, red,yellow
Package include:6pcs SYB-170 Mini Solderless Breadboard

Mini Solderless Breadboard
1 Terminal Strip
Tie-point 170
ABS plastic material
Completely reusable
Coloured coordinates for easy component placement
Phosphor bronze nickel plated spring clips
Accepts a variety of wire sizes (29-20 AWG)
Dimensions: 45x34.5x8.5mm
Color: Black, white,blue,green, red,yellow
Package include:6pcs SYB-170 Mini Solderless Breadboard

Mini Solderless Breadboard
1 Terminal Strip
Tie-point 170
ABS plastic material
Completely reusable
Coloured coordinates for easy component placement
Phosphor bronze nickel plated spring clips
Accepts a variety of wire sizes (29-20 AWG)
Dimensions: 45x34.5x8.5mm
Color: Black, white,blue,green, red,yellow
Package include:6pcs SYB-170 Mini Solderless Breadboard

Mini Solderless Breadboard
1 Terminal Strip
Tie-point 170
ABS plastic material
Completely reusable
Coloured coordinates for easy component placement
Phosphor bronze nickel plated spring clips
Accepts a variety of wire sizes (29-20 AWG)
Dimensions: 45x34.5x8.5mm
Color: Black, white,blue,green, red,yellow
Package include:6pcs SYB-170 Mini Solderless Breadboard

Mini Solderless Breadboard
1 Terminal Strip
Tie-point 170
ABS plastic material
Completely reusable
Coloured coordinates for easy component placement
Phosphor bronze nickel plated spring clips
Accepts a variety of wire sizes (29-20 AWG)
Dimensions: 45x34.5x8.5mm
Color: Black, white,blue,green, red,yellow
Package include:6pcs SYB-170 Mini Solderless Breadboard

Mini Solderless Breadboard
1 Terminal Strip
Tie-point 170
ABS plastic material
Completely reusable
Coloured coordinates for easy component placement
Phosphor bronze nickel plated spring clips
Accepts a variety of wire sizes (29-20 AWG)
Dimensions: 45x34.5x8.5mm
Color: Black, white,blue,green, red,yellow
Package include:6pcs SYB-170 Mini Solderless Breadboard

Mini Solderless Breadboard
1 Terminal Strip
Tie-point 170
ABS plastic material
Completely reusable
Coloured coordinates for easy component placement
Phosphor bronze nickel plated spring clips
Accepts a variety of wire sizes (29-20 AWG)
Dimensions: 45x34.5x8.5mm
Color: Black, white,blue,green, red,yellow
Package include:6pcs SYB-170 Mini Solderless Breadboard

Product Description
1. Two independent PWM outputs, the frequency and duty cycle can be set separately;
2. Wide frequency range and high precision;
3. Serial communication is possible
1. Module description
Two independent PWM outputs, the frequency and duty cycle can be set separately;
The frequency is divided into three ranges:
1. XXX (no decimal point): The minimum unit is 1Hz, and the value range is 1Hz~999Hz;
2. XX.X (the decimal point is in ten's place): the smallest unit is 0.1Khz; the value range is 0.1KHz~99.9KHz
3. X.X.X. (three digits have a decimal point): the smallest unit is 1Khz; the value range is 1KHz~150KHz
e.g. Frequency display: 100 means PWM output 100Hz pulse;
54.1 means that the PWM outputs a 54.1KHz pulse;
1.2.4. Indicates that the PWM output 124KHz pulse
Duty cycle value range: 0~100;
The three frequency ranges share a duty cycle, and all set parameters are saved after power-off.

5MM LED
Working current: 20 (mA)
Working voltage:
(White): 3.0V-3.2V
(Red): 2.0V-2.2V
(Yellow): 2.0V-2.2V
(Green): 3.0V-3.2V
(Blue): 3.0V-3.2V
(Warm-White): 3.0V-3.2V
(Orange): 2.0-2.2V
(Pink): 3.0V-3.2V
(Purple): 3.0V-3.2V
(Yellow Green): 3.0V-3.2V

5MM LED
Working current: 20 (mA)
Working voltage:
(White): 3.0V-3.2V
(Red): 2.0V-2.2V
(Yellow): 2.0V-2.2V
(Green): 3.0V-3.2V
(Blue): 3.0V-3.2V
(Warm-White): 3.0V-3.2V
(Orange): 2.0-2.2V
(Pink): 3.0V-3.2V
(Purple): 3.0V-3.2V
(Yellow Green): 3.0V-3.2V

5MM LED
Working current: 20 (mA)
Working voltage:
(White): 3.0V-3.2V
(Red): 2.0V-2.2V
(Yellow): 2.0V-2.2V
(Green): 3.0V-3.2V
(Blue): 3.0V-3.2V
(Warm-White): 3.0V-3.2V
(Orange): 2.0-2.2V
(Pink): 3.0V-3.2V
(Purple): 3.0V-3.2V
(Yellow Green): 3.0V-3.2V

5MM LED
Working current: 20 (mA)
Working voltage:
(White): 3.0V-3.2V
(Red): 2.0V-2.2V
(Yellow): 2.0V-2.2V
(Green): 3.0V-3.2V
(Blue): 3.0V-3.2V
(Warm-White): 3.0V-3.2V
(Orange): 2.0-2.2V
(Pink): 3.0V-3.2V
(Purple): 3.0V-3.2V
(Yellow Green): 3.0V-3.2V

5MM LED
Working current: 20 (mA)
Working voltage:
(White): 3.0V-3.2V
(Red): 2.0V-2.2V
(Yellow): 2.0V-2.2V
(Green): 3.0V-3.2V
(Blue): 3.0V-3.2V
(Warm-White): 3.0V-3.2V
(Orange): 2.0-2.2V
(Pink): 3.0V-3.2V
(Purple): 3.0V-3.2V
(Yellow Green): 3.0V-3.2V