Szerszám alkatrészek és tartozékok

 
 
 
 
 NE555 UC3842 UC3843 UC3845 24C02 24C04 24C08 24C16 24C32 24C64 DIP  each 10pcs
 
 

Specification Quantity Length
Φ1* 150pcs *40mm(Black)
Φ2 *120pcs* 40mm(Black)
Φ3 *100pcs* 40mm(Black)
Φ4 *90pcs* 40mm(Black)
Φ5 *60pcs* 40mm(Black)
Φ6* 45pcs *40mm(Black)
Φ8 *30pcs* 40mm(Black)
Φ10 *30pcs* 40mm(Black)
Material: PE
Tensile Strength: 10.4 Mpa
Dielectric Strength:15 kV/mm
Minimum Shrinkage Temp: 70°C
Flammability: Flame Retardant
Full Shrinkage Temp: 110°C Maximum
Operating Temperature: -55°C to 125°C
Shrinkage: 2:1 (maximum shrinkage to 1/2 of its supply diameter)
 

The wheel has a plastic hub, a soft tire, and detachable. It can be used to make various technological small productions. The tire has a wide tire surface and is suitable for making off-road vehicles, four-wheel drive vehicles and other toys.
[Diameter]: 60 mm (manual measurement, there is an error of ±1mm)
[Width]: 28mm
[Aperture]: 3mm (fitting 3mm shaft tightly)
[Material]: Plastic
[Delivery List]: 1
[Weight]: about 16.8 grams

Durable and easy to install
Very convenient and practical
Very popular among the electronic lovers
Package include:
1000 x 1/2W 100 Values Resistors
100value 1000pcs 1/2W Carbon Film Resistors
1Ω 1.2Ω 1.8Ω 2.2Ω 3.3Ω
4.7Ω 5.6Ω 6.8Ω 10Ω 12Ω
15Ω 18Ω 20Ω 22Ω 27Ω
30Ω 33Ω 43Ω 47Ω 51Ω
56Ω 68Ω 75Ω 82Ω 91Ω
100Ω 120Ω 150Ω 180Ω 200Ω
220Ω 270Ω 300Ω 330Ω 360Ω
390Ω 430Ω 470Ω 510Ω 560Ω
680Ω 750Ω 820Ω 1KΩ 1.2KΩ
1.5KΩ 1.8KΩ 2KΩ 2.2KΩ 2.4KΩ
2.7KΩ 3KΩ 3.3KΩ 4.3KΩ 4.7KΩ
5.1KΩ 5.6KΩ 6.8KΩ 7.5KΩ 8.2KΩ
9.1KΩ 10KΩ 12KΩ 15KΩ 18KΩ
20KΩ 22KΩ 27KΩ 30KΩ 33KΩ
36KΩ 39KΩ 43KΩ 47KΩ 51KΩ
56KΩ 68KΩ 75KΩ 82KΩ 91KΩ
100KΩ 120KΩ 150KΩ 180KΩ 200KΩ
220KΩ 270KΩ 300KΩ 330KΩ 390KΩ
430KΩ 470KΩ 510KΩ 560KΩ 680KΩ
820KΩ 1MΩ 2MΩ 2.2MΩ 10MΩ
 
 
 
 
 
'

 
 
 Capacitor

 Sensors

 Resistor
 Crystal

 EL Products

 LCD Display
 Integrated Circuit

 Transistor

 Diodes
 Thyristors

 Material

 Potentiometor
5pcs/lot 1W 8R Acoustic Loudspeaker 8 Ohm 1W Ultra-thin 50MM Speaker Diameter thickness 5CM Speakers For Arduino Diy Electronic

Replacement resistor kit for car airbag repair:
1/4W  1%   2ohm, 2.2ohm, 2.4ohm, 2.7ohm, 3ohm, 3.3ohm = 120pcs
The resistance value of each car is different, these 6 types already include all private car models. You can rest assured to shoot straight! (If you don't know the resistance value, you can only try each type) (not applicable to SUV models individually)

Replacement resistor kit for car airbag repair:
1/4W  1%   2ohm, 2.2ohm, 2.4ohm, 2.7ohm, 3ohm, 3.3ohm = 120pcs
The resistance value of each car is different, these 6 types already include all private car models. You can rest assured to shoot straight! (If you don't know the resistance value, you can only try each type) (not applicable to SUV models individually)

Replacement resistor kit for car airbag repair:
1/4W  1%   2ohm, 2.2ohm, 2.4ohm, 2.7ohm, 3ohm, 3.3ohm = 120pcs
The resistance value of each car is different, these 6 types already include all private car models. You can rest assured to shoot straight! (If you don't know the resistance value, you can only try each type) (not applicable to SUV models individually)

Replacement resistor kit for car airbag repair:
1/4W  1%   2ohm, 2.2ohm, 2.4ohm, 2.7ohm, 3ohm, 3.3ohm = 120pcs
The resistance value of each car is different, these 6 types already include all private car models. You can rest assured to shoot straight! (If you don't know the resistance value, you can only try each type) (not applicable to SUV models individually)

Replacement resistor kit for car airbag repair:
1/4W  1%   2ohm, 2.2ohm, 2.4ohm, 2.7ohm, 3ohm, 3.3ohm = 120pcs
The resistance value of each car is different, these 6 types already include all private car models. You can rest assured to shoot straight! (If you don't know the resistance value, you can only try each type) (not applicable to SUV models individually)

Replacement resistor kit for car airbag repair:
1/4W  1%   2ohm, 2.2ohm, 2.4ohm, 2.7ohm, 3ohm, 3.3ohm = 120pcs
The resistance value of each car is different, these 6 types already include all private car models. You can rest assured to shoot straight! (If you don't know the resistance value, you can only try each type) (not applicable to SUV models individually)

Replacement resistor kit for car airbag repair:
1/4W  1%   2ohm, 2.2ohm, 2.4ohm, 2.7ohm, 3ohm, 3.3ohm = 120pcs
The resistance value of each car is different, these 6 types already include all private car models. You can rest assured to shoot straight! (If you don't know the resistance value, you can only try each type) (not applicable to SUV models individually)

MG995 parameters:
 
MG995/Biped Robot/Manipulator/Remote Control Car/55G Metal Copper Gear Servo
Product model MG995 Product size 40.7*19.7*42.9mm Product weight 55g
Working torque 13KG/cm Reaction speed 53-62R/M Operating temperature -30~ 60°
Dead zone setting 4 microseconds. Plug type JR, FUTABA universal rotation angle 180 degrees larger
Servo type analog servo working current 100mA, voltage 3-7.2V
Structural material: metal copper teeth, coreless motor
Operating speed: 0.17 seconds/60 degrees (4.8V); 0.13 seconds/60 degrees (6.0V)
Accessories include rudder wheel, cable length 30CM, fixing screws, vibration damping rubber sleeves and aluminum sleeves and other accessories (see actual shots for details)
Scope of application 1:10 and 1:8 flat sports cars, off-road vehicles, trucks, trucks, climbing vehicles, biped robots, manipulators, remote control boats, suitable for 50-90 methanol fixed-wing aircraft and 26cc-50cc gasoline fixed Wing aircraft and other models.
MG996 parameters:
New large torque servo MG996R (MG995 upgrade product) 6v/11Kg (Mainland version)
The upgraded product of the original MG995, the speed, pulling force and degree have been correspondingly improved
Recommended on this site!
It is suitable for models of 50-90 methanol fixed-wing aircraft and 26cc-50cc gasoline fixed-wing aircraft.
Compared with MG946R, MG996R is faster, but the pulling force is slightly lower.
Product name: New large torque servo MG996R (MG995 upgrade product) 6v/11Kg
Manufacturer Number: MG996R
Product net weight: 55g
Product size: 40.7*19.7*42.9mm
Product tension: 9.4kg/cm(4.8V), 11kg/cm(6V)
Response speed: 0.17sec/60degree(4.8v) 0.14sec/60degree(6v)
Working voltage: 4.8-7.2V
Working temperature: 0℃-55℃
Gear form: metal gear
Working dead zone: 5us (microseconds)
Suitable models: Class 50-90 methanol fixed-wing aircraft and 26cc-50cc gasoline fixed-wing aircraft, etc.
(The difference between 995-996-945-946 lies in the application speed, torque, accuracy, performance, and technical parameters. But the appearance and dimensions are the same, there is no difference), "995 speed is fast but torque is small, 996 is slow and torque is large, 945/ The overall performance of the 946 is relatively stable. "^_^Copper sleeve/double bearing is the friction protection device on the output power of the steering gear (digital steering gear adopts double bearings). Digital steering gear: high precision, stable performance and self-locking function. Ensure that it will not lose control under signal instability. Angle: For example, 90 degrees means that the control angle is 45 degrees for positive/negative, and 0 degrees for centering. There are angle limit points (pulse signal 1 millisecond positive-1.5 milliseconds centered-2 milliseconds negative, which is a universal standard signal for remote ) Note: The pulse signal of 180 degree and 270 degree control is 0.5-2.5 milliseconds wider. For robots and manipulators, digital servos are recommended. As for the copper sleeve and bearing, it depends on individual needs. 360-degree modified steering gear: actually equivalent to a geared motor with infinitely variable speed, which can control the speed and direction. There is no 0-360 degree angle control function. The control method is the same as the control signal of a general steering gear. It is the most suitable power source for Wali modification (1~1.5 milliseconds forward rotation, the fastest forward rotation speed is 1 millisecond, the closer to 1.5 the slower, the steering gear stops rotating at 1.5) 1.5 milliseconds to 2 reverse side with potentiometer debugging hole
 
 

MG995 parameters:
 
MG995/Biped Robot/Manipulator/Remote Control Car/55G Metal Copper Gear Servo
Product model MG995 Product size 40.7*19.7*42.9mm Product weight 55g
Working torque 13KG/cm Reaction speed 53-62R/M Operating temperature -30~ 60°
Dead zone setting 4 microseconds. Plug type JR, FUTABA universal rotation angle 180 degrees larger
Servo type analog servo working current 100mA, voltage 3-7.2V
Structural material: metal copper teeth, coreless motor
Operating speed: 0.17 seconds/60 degrees (4.8V); 0.13 seconds/60 degrees (6.0V)
Accessories include rudder wheel, cable length 30CM, fixing screws, vibration damping rubber sleeves and aluminum sleeves and other accessories (see actual shots for details)
Scope of application 1:10 and 1:8 flat sports cars, off-road vehicles, trucks, trucks, climbing vehicles, biped robots, manipulators, remote control boats, suitable for 50-90 methanol fixed-wing aircraft and 26cc-50cc gasoline fixed Wing aircraft and other models.
MG996 parameters:
New large torque servo MG996R (MG995 upgrade product) 6v/11Kg (Mainland version)
The upgraded product of the original MG995, the speed, pulling force and degree have been correspondingly improved
Recommended on this site!
It is suitable for models of 50-90 methanol fixed-wing aircraft and 26cc-50cc gasoline fixed-wing aircraft.
Compared with MG946R, MG996R is faster, but the pulling force is slightly lower.
Product name: New large torque servo MG996R (MG995 upgrade product) 6v/11Kg
Manufacturer Number: MG996R
Product net weight: 55g
Product size: 40.7*19.7*42.9mm
Product tension: 9.4kg/cm(4.8V), 11kg/cm(6V)
Response speed: 0.17sec/60degree(4.8v) 0.14sec/60degree(6v)
Working voltage: 4.8-7.2V
Working temperature: 0℃-55℃
Gear form: metal gear
Working dead zone: 5us (microseconds)
Suitable models: Class 50-90 methanol fixed-wing aircraft and 26cc-50cc gasoline fixed-wing aircraft, etc.
(The difference between 995-996-945-946 lies in the application speed, torque, accuracy, performance, and technical parameters. But the appearance and dimensions are the same, there is no difference), "995 speed is fast but torque is small, 996 is slow and torque is large, 945/ The overall performance of the 946 is relatively stable. "^_^Copper sleeve/double bearing is the friction protection device on the output power of the steering gear (digital steering gear adopts double bearings). Digital steering gear: high precision, stable performance and self-locking function. Ensure that it will not lose control under signal instability. Angle: For example, 90 degrees means that the control angle is 45 degrees for positive/negative, and 0 degrees for centering. There are angle limit points (pulse signal 1 millisecond positive-1.5 milliseconds centered-2 milliseconds negative, which is a universal standard signal for remote ) Note: The pulse signal of 180 degree and 270 degree control is 0.5-2.5 milliseconds wider. For robots and manipulators, digital servos are recommended. As for the copper sleeve and bearing, it depends on individual needs. 360-degree modified steering gear: actually equivalent to a geared motor with infinitely variable speed, which can control the speed and direction. There is no 0-360 degree angle control function. The control method is the same as the control signal of a general steering gear. It is the most suitable power source for Wali modification (1~1.5 milliseconds forward rotation, the fastest forward rotation speed is 1 millisecond, the closer to 1.5 the slower, the steering gear stops rotating at 1.5) 1.5 milliseconds to 2 reverse side with potentiometer debugging hole
 
 

MG995 parameters:
 
MG995/Biped Robot/Manipulator/Remote Control Car/55G Metal Copper Gear Servo
Product model MG995 Product size 40.7*19.7*42.9mm Product weight 55g
Working torque 13KG/cm Reaction speed 53-62R/M Operating temperature -30~ 60°
Dead zone setting 4 microseconds. Plug type JR, FUTABA universal rotation angle 180 degrees larger
Servo type analog servo working current 100mA, voltage 3-7.2V
Structural material: metal copper teeth, coreless motor
Operating speed: 0.17 seconds/60 degrees (4.8V); 0.13 seconds/60 degrees (6.0V)
Accessories include rudder wheel, cable length 30CM, fixing screws, vibration damping rubber sleeves and aluminum sleeves and other accessories (see actual shots for details)
Scope of application 1:10 and 1:8 flat sports cars, off-road vehicles, trucks, trucks, climbing vehicles, biped robots, manipulators, remote control boats, suitable for 50-90 methanol fixed-wing aircraft and 26cc-50cc gasoline fixed Wing aircraft and other models.
MG996 parameters:
New large torque servo MG996R (MG995 upgrade product) 6v/11Kg (Mainland version)
The upgraded product of the original MG995, the speed, pulling force and degree have been correspondingly improved
Recommended on this site!
It is suitable for models of 50-90 methanol fixed-wing aircraft and 26cc-50cc gasoline fixed-wing aircraft.
Compared with MG946R, MG996R is faster, but the pulling force is slightly lower.
Product name: New large torque servo MG996R (MG995 upgrade product) 6v/11Kg
Manufacturer Number: MG996R
Product net weight: 55g
Product size: 40.7*19.7*42.9mm
Product tension: 9.4kg/cm(4.8V), 11kg/cm(6V)
Response speed: 0.17sec/60degree(4.8v) 0.14sec/60degree(6v)
Working voltage: 4.8-7.2V
Working temperature: 0℃-55℃
Gear form: metal gear
Working dead zone: 5us (microseconds)
Suitable models: Class 50-90 methanol fixed-wing aircraft and 26cc-50cc gasoline fixed-wing aircraft, etc.
(The difference between 995-996-945-946 lies in the application speed, torque, accuracy, performance, and technical parameters. But the appearance and dimensions are the same, there is no difference), "995 speed is fast but torque is small, 996 is slow and torque is large, 945/ The overall performance of the 946 is relatively stable. "^_^Copper sleeve/double bearing is the friction protection device on the output power of the steering gear (digital steering gear adopts double bearings). Digital steering gear: high precision, stable performance and self-locking function. Ensure that it will not lose control under signal instability. Angle: For example, 90 degrees means that the control angle is 45 degrees for positive/negative, and 0 degrees for centering. There are angle limit points (pulse signal 1 millisecond positive-1.5 milliseconds centered-2 milliseconds negative, which is a universal standard signal for remote ) Note: The pulse signal of 180 degree and 270 degree control is 0.5-2.5 milliseconds wider. For robots and manipulators, digital servos are recommended. As for the copper sleeve and bearing, it depends on individual needs. 360-degree modified steering gear: actually equivalent to a geared motor with infinitely variable speed, which can control the speed and direction. There is no 0-360 degree angle control function. The control method is the same as the control signal of a general steering gear. It is the most suitable power source for Wali modification (1~1.5 milliseconds forward rotation, the fastest forward rotation speed is 1 millisecond, the closer to 1.5 the slower, the steering gear stops rotating at 1.5) 1.5 milliseconds to 2 reverse side with potentiometer debugging hole
 
 

MG995 parameters:
 
MG995/Biped Robot/Manipulator/Remote Control Car/55G Metal Copper Gear Servo
Product model MG995 Product size 40.7*19.7*42.9mm Product weight 55g
Working torque 13KG/cm Reaction speed 53-62R/M Operating temperature -30~ 60°
Dead zone setting 4 microseconds. Plug type JR, FUTABA universal rotation angle 180 degrees larger
Servo type analog servo working current 100mA, voltage 3-7.2V
Structural material: metal copper teeth, coreless motor
Operating speed: 0.17 seconds/60 degrees (4.8V); 0.13 seconds/60 degrees (6.0V)
Accessories include rudder wheel, cable length 30CM, fixing screws, vibration damping rubber sleeves and aluminum sleeves and other accessories (see actual shots for details)
Scope of application 1:10 and 1:8 flat sports cars, off-road vehicles, trucks, trucks, climbing vehicles, biped robots, manipulators, remote control boats, suitable for 50-90 methanol fixed-wing aircraft and 26cc-50cc gasoline fixed Wing aircraft and other models.
MG996 parameters:
New large torque servo MG996R (MG995 upgrade product) 6v/11Kg (Mainland version)
The upgraded product of the original MG995, the speed, pulling force and degree have been correspondingly improved
Recommended on this site!
It is suitable for models of 50-90 methanol fixed-wing aircraft and 26cc-50cc gasoline fixed-wing aircraft.
Compared with MG946R, MG996R is faster, but the pulling force is slightly lower.
Product name: New large torque servo MG996R (MG995 upgrade product) 6v/11Kg
Manufacturer Number: MG996R
Product net weight: 55g
Product size: 40.7*19.7*42.9mm
Product tension: 9.4kg/cm(4.8V), 11kg/cm(6V)
Response speed: 0.17sec/60degree(4.8v) 0.14sec/60degree(6v)
Working voltage: 4.8-7.2V
Working temperature: 0℃-55℃
Gear form: metal gear
Working dead zone: 5us (microseconds)
Suitable models: Class 50-90 methanol fixed-wing aircraft and 26cc-50cc gasoline fixed-wing aircraft, etc.
(The difference between 995-996-945-946 lies in the application speed, torque, accuracy, performance, and technical parameters. But the appearance and dimensions are the same, there is no difference), "995 speed is fast but torque is small, 996 is slow and torque is large, 945/ The overall performance of the 946 is relatively stable. "^_^Copper sleeve/double bearing is the friction protection device on the output power of the steering gear (digital steering gear adopts double bearings). Digital steering gear: high precision, stable performance and self-locking function. Ensure that it will not lose control under signal instability. Angle: For example, 90 degrees means that the control angle is 45 degrees for positive/negative, and 0 degrees for centering. There are angle limit points (pulse signal 1 millisecond positive-1.5 milliseconds centered-2 milliseconds negative, which is a universal standard signal for remote ) Note: The pulse signal of 180 degree and 270 degree control is 0.5-2.5 milliseconds wider. For robots and manipulators, digital servos are recommended. As for the copper sleeve and bearing, it depends on individual needs. 360-degree modified steering gear: actually equivalent to a geared motor with infinitely variable speed, which can control the speed and direction. There is no 0-360 degree angle control function. The control method is the same as the control signal of a general steering gear. It is the most suitable power source for Wali modification (1~1.5 milliseconds forward rotation, the fastest forward rotation speed is 1 millisecond, the closer to 1.5 the slower, the steering gear stops rotating at 1.5) 1.5 milliseconds to 2 reverse side with potentiometer debugging hole