Szerszám alkatrészek és tartozékok

Size:37mmx41mm/1.46"x1.41"(inch) (approx)
The working voltage: DC 3 ~ 5V
Loudspeaker: 8, 0.5W
Features:
1.An easy to use 10 seconds of voice recording
2.high-quality, natural voice restored
3.can be used as propaganda module
4.with looping, jog playback, single-pass play function
5.available single-chip control
6.this module can directly drive a small speaker 8 ohm 0.5W
 
 

Output drive capability: 250VAC-10A, 125VAC-10A, 30VDC-10A, 28VDC-10A; easy to use, each output group has a simple 3-wire structure, and 6 output terminals are reserved; the input is directly connected to the single-chip IO port or digital circuit, Input high level relay to pull in, input low level relay to release; working voltage 5V, suction
The combined current is about 70mA per channel, with a relay status indicator; full SMD components, reasonable drive circuit design, using 8050 transistors to drive the relay action; fixed screw holes are provided for easy installation.
Simple test instructions: The module input and output are electrically insulated. After the correct voltage is supplied, you only need to connect a high level (such as a short circuit with VCC) to the input pin to make the relay pull in, not connected or connected to a low level (Such as short-circuit with GND) The relay does not operate.

Output drive capability: 250VAC-10A, 125VAC-10A, 30VDC-10A, 28VDC-10A; easy to use, each output group has a simple 3-wire structure, and 6 output terminals are reserved; the input is directly connected to the single-chip IO port or digital circuit, Input high level relay to pull in, input low level relay to release; working voltage 5V, suction
The combined current is about 70mA per channel, with a relay status indicator; full SMD components, reasonable drive circuit design, using 8050 transistors to drive the relay action; fixed screw holes are provided for easy installation.
Simple test instructions: The module input and output are electrically insulated. After the correct voltage is supplied, you only need to connect a high level (such as a short circuit with VCC) to the input pin to make the relay pull in, not connected or connected to a low level (Such as short-circuit with GND) The relay does not operate.

Output drive capability: 250VAC-10A, 125VAC-10A, 30VDC-10A, 28VDC-10A; easy to use, each output group has a simple 3-wire structure, and 6 output terminals are reserved; the input is directly connected to the single-chip IO port or digital circuit, Input high level relay to pull in, input low level relay to release; working voltage 5V, suction
The combined current is about 70mA per channel, with a relay status indicator; full SMD components, reasonable drive circuit design, using 8050 transistors to drive the relay action; fixed screw holes are provided for easy installation.
Simple test instructions: The module input and output are electrically insulated. After the correct voltage is supplied, you only need to connect a high level (such as a short circuit with VCC) to the input pin to make the relay pull in, not connected or connected to a low level (Such as short-circuit with GND) The relay does not operate.

Output drive capability: 250VAC-10A, 125VAC-10A, 30VDC-10A, 28VDC-10A; easy to use, each output group has a simple 3-wire structure, and 6 output terminals are reserved; the input is directly connected to the single-chip IO port or digital circuit, Input high level relay to pull in, input low level relay to release; working voltage 5V, suction
The combined current is about 70mA per channel, with a relay status indicator; full SMD components, reasonable drive circuit design, using 8050 transistors to drive the relay action; fixed screw holes are provided for easy installation.
Simple test instructions: The module input and output are electrically insulated. After the correct voltage is supplied, you only need to connect a high level (such as a short circuit with VCC) to the input pin to make the relay pull in, not connected or connected to a low level (Such as short-circuit with GND) The relay does not operate.

Output drive capability: 250VAC-10A, 125VAC-10A, 30VDC-10A, 28VDC-10A; easy to use, each output group has a simple 3-wire structure, and 6 output terminals are reserved; the input is directly connected to the single-chip IO port or digital circuit, Input high level relay to pull in, input low level relay to release; working voltage 5V, suction
The combined current is about 70mA per channel, with a relay status indicator; full SMD components, reasonable drive circuit design, using 8050 transistors to drive the relay action; fixed screw holes are provided for easy installation.
Simple test instructions: The module input and output are electrically insulated. After the correct voltage is supplied, you only need to connect a high level (such as a short circuit with VCC) to the input pin to make the relay pull in, not connected or connected to a low level (Such as short-circuit with GND) The relay does not operate.

Output drive capability: 250VAC-10A, 125VAC-10A, 30VDC-10A, 28VDC-10A; easy to use, each output group has a simple 3-wire structure, and 6 output terminals are reserved; the input is directly connected to the single-chip IO port or digital circuit, Input high level relay to pull in, input low level relay to release; working voltage 5V, suction
The combined current is about 70mA per channel, with a relay status indicator; full SMD components, reasonable drive circuit design, using 8050 transistors to drive the relay action; fixed screw holes are provided for easy installation.
Simple test instructions: The module input and output are electrically insulated. After the correct voltage is supplied, you only need to connect a high level (such as a short circuit with VCC) to the input pin to make the relay pull in, not connected or connected to a low level (Such as short-circuit with GND) The relay does not operate.

Output drive capability: 250VAC-10A, 125VAC-10A, 30VDC-10A, 28VDC-10A; easy to use, each output group has a simple 3-wire structure, and 6 output terminals are reserved; the input is directly connected to the single-chip IO port or digital circuit, Input high level relay to pull in, input low level relay to release; working voltage 5V, suction
The combined current is about 70mA per channel, with a relay status indicator; full SMD components, reasonable drive circuit design, using 8050 transistors to drive the relay action; fixed screw holes are provided for easy installation.
Simple test instructions: The module input and output are electrically insulated. After the correct voltage is supplied, you only need to connect a high level (such as a short circuit with VCC) to the input pin to make the relay pull in, not connected or connected to a low level (Such as short-circuit with GND) The relay does not operate.

180pcs/lot Polyester Film Capacitor Assorted Kit 2A104J 2A332J 2A472J 2A103J 2A333J 2A473J 2A563J 2A223J  Capacitors Set Pack
 
Package Included:
18Values*10pcs Polyester Film Capacitor Assorted Kit 
2A471J

2A102J

2A152J

2A222J

2A332J

2A472J
capacito

2A682H

2A822J

2A103J

2A153J

2A223J
2A104J

2A473J

2A563J

2A683J

2A104J

2A224J