A cím elején, valamint az első képen szereplő szín/minta/méret/típus kerül kiszállításra!
Digital LED Display DC 12V DS3231 Self-lock Relay PLC Cycle Timer Module Delay Time Switch Real Clock Control
Description
Adopts high precision clock DS3231, stable performance, meeting the users\' needs.
LED 4 digits display, intelligent control, time relay function.
The use of opto isolated input and output, enhanced anti-jamming capability and consumption.
The last setting parameters can be memorized after power off.
With low consumption working mode, long-press the K3 key can control the LED display.
To ensure stability, industrial grade PCB board.
Applied to control motor, bulb, LED light string, mini pump, etc.
With power-off memory function, setting once does not need to repeat setting
Working modes selection: after powered on, long press K1 for 2s, later into the selection of modes: P1~4; K2 to enter the mode.
P-1: Start working time and stop working time(e.g. control bulb automatically light up at 5:00 p.m. and automatically turn off at 6:10 a.m.);
P-2: Everyday set two 1s switch signals(e.g. control load auto power on at 6:00 and power off at 18:00);
P-3: What date on and what date of(e.g. control load auto start on November 16 and stop on May 16 next year);
P-4: Set real rime: month, day, hour, minute.
Standby state: P-1 and P-2 modes show real-time time (hours: minutes), P-3 shows real-time months (months: days)
Setting time description:
K2: SHIFT key: Press to adjust the flashing position of the digital tube. Which digital tube flashes, K3 adjusts the value of the flashing digital tube. Until you press K2, the digital tube no longer blinks.
K3: When the digital tube flashes, K3 adjusts the digital change.
Note: Press K2 four times for one cycle, The first two adjust the open time and the last two adjust the stop time.
When P-4 sets the real-time time, press K2 twice firstly to set the month: days; after the two presses settings: hours: minutes.
Turn off the digital tube display instructions:
Press and hold K3 for 3 seconds in standby mode to turn off or turn on the digital tube to switch low power mode.
Specifications:
Display: LED Digital Display
Working Voltage: DC 12V (Optional)
Output Capacity: Control Load Within DC 30V 5A or AC 220V 5A
Static Current: 20mA
Working Current: 50mA
Working Temperature: -40-85°C
PCB Size: 64 * 42 * 18mm / 2.52 * 1.65 * 0.7in (L * W * H)
Package Included
1 Pcs Relay Module
33056573050. - yikesu