5db/tétel Univerzális 3-12V 6 Digitális PIROS LED-es jelzőtábla sátrakhoz Vízlámpa Kenyérlemez PCB PLC UNO MEGA2560 Raspberry pi
5pcs/lot Universal 3-12V 6 Digital RED LED Indicator Board for Marquees Water light Breadboard PCB PLC UNO MEGA2560 raspberry pi
Universal 3-12V 6 Digital RED LED Indicator Board for Marquees Water light Breadboard PCB PLC UNO MEGA2560 raspberry pi
Packing list:
 
5 pcs 6 bit   RED   3V 3.3V 5V 9V 12V LED's Board
 
Description:
2.54MM PIN 6 Digital LED Board ,Can be inserted directly into Breadboard Universal board   ,Ideal for linking up to your Arduiuo UNO Pro Mini Nano Mega2560 DUE etc,or others MCU ( AVR STM32 ARM7 ARM9 ARM10 ARM11 PIC C8051 C51 STC MSP430 FPGA/CPLD etc.) 
   
   
1 6  Digital   RED   Common Cathode LEDs.
 
 
2 7 PIN OUT  2.54mm
 
3 1K ohm  Limiting resistor
 
4 Power Supply Voltage: 3.3-12V;
   
5 Size: 17.78MM x 11.43MM.
 
  
PCB:
Circuit schematics : 
Connection with Arduiuo(Only 6 bit LED's Board ,Does not include ARDUIUO UNO R3) :
 
Circuit schematics : 
Arduiuo uno/mega2560 Code  
//******************************************************//
 
/*
  Arduiuo_6led
 
  This example code is in the public domain.
 */
 
// give it a name:
int D1 = 13;
int D2 = 12;
int D3 = 11;
int D4 = 10;
int D5 = 9;
int D6 = 8;
 
// the setup routine runs once when you press reset:
void setup() {                
  // initialize the digital pin as an output.
pinMode(D1, OUTPUT);   
pinMode(D2, OUTPUT); 
pinMode(D3, OUTPUT);  
pinMode(D4, OUTPUT);  
pinMode(D5, OUTPUT);  
pinMode(D6, OUTPUT);  
}
 
// the loop routine runs over and over again forever:
void loop() {
  
  digitalWrite(D1, HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(200);               // wait for a 200 Millisecond
  digitalWrite(D1, LOW);    // turn the LED off by making the voltage LOW
  
  digitalWrite(D2, HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(200);               // wait for a Millisecond
  digitalWrite(D2, LOW);    // turn the LED off by making the voltage LOW
  
  digitalWrite(D3, HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(200);               // wait for a Millisecond
  digitalWrite(D3, LOW);    // turn the LED off by making the voltage LOW
 
  digitalWrite(D4, HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(200);               // wait for a Millisecond
  digitalWrite(D4, LOW);    // turn the LED off by making the voltage LOW
  
  digitalWrite(D5, HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(200);               // wait for a Millisecond
  digitalWrite(D5, LOW);    // turn the LED off by making the voltage LOW
  
  digitalWrite(D6, HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(200);               // wait for a Millisecond
  digitalWrite(D6, LOW);    // turn the LED off by making the voltage LOW
  
}
 
//******************************************************//
32273305801 - shop1525466