• -43%

PS2 joystick billentyűzet RF 433MHz vezeték nélküli joystick játék távirányító modul adó-vevő készlet intelligens

PS2 joystick billentyűzet RF 433MHz vezeték nélküli joystick játék távirányító modul adó-vevő készlet intelligens

882 Ft 43% megtakarítás
1 547 Ft
Nincs adó
You can also buyRF 315MHz Wireless Joystick Game Remote Controller Transceiver Kit here (Link) :
Description
This is wireless joystick remote kit that include a wireless joystick control board and a RF 433MHz receiver module.
Onboard one game joystick and 4 buttons. The shape of the PCB is suitable for your hands.
There is ATmega8A-AU chip onboard that has firmware. It will get position information of the thumb joystick and buttons and then send it out via RF transmitter onboard.
Every time the joystick change or one button is pressed or released, the MCU will send the information out.
NOTE1: This product does not include the battery, please know.
NOTE2: For the power for the remote control, you can use 3.7V lithium battery with XH2.54 connector. And You can refer to the red and black line order from the follow reference photo:
Features:
- Onboard MCU: ATmega8A
- Working voltage: 3-5.3V
- Working current: 42mA(max)
- Buttons: with beautiful color key cap and pins are all float, so you should pull up it in your MCU(Active low level output).
- Thumb joystick: great to control a smart car or 4-axis Aircraft.
- Onboard power supply socket: 2.54mm pitch
- Onboard power switch: turn on or turn off the power.
- Onboard PROGRAM header: burn bootloader and firmware
- Onboard transmitter: large power 433MHz transmitter module
- Transfer rate: 2000bps
- Transmission distance: When supply power is 5V, the open area transmission distance can be increased to 100 meters.
- Positioning hole diameter: 3.2mm
- Great for smart car, smart Aircraft projects
About receiver module:
- Compatible for Arduino
- Library: VirtualWire
- Operating voltage: 3 - 5.3VDC
- Working frequency: 433MHz
- Working Current: 2mA
- Sensitivity: -110db
- Transfer rate: 2000bps
- Antenna: Onboard 433MHz dedicated PCB Antenna
- Great for DIY project.
Photos
Part List (Schematics and program can be sent via e-mail,Please contact us)
1 x Remote control
1 x Receiver module
 
               
Please Note That (Note: After you buy the product, the documents can be send, Please contact us)
Mennyiség

 

Biztonsági feltételek

 

Szállításii feltételek

 

Visszaküldési feltételek

PS2 joystick billentyűzet RF 433MHz vezeték nélküli joystick játék távirányító modul adó-vevő készlet intelligens autókhoz / 4 tengelyes repülőgépekhez
PS2 Joystick Keypad RF 433MHz Wireless Joystick Game Remote Controller Module Transceiver Kit for Smart Car / 4-axis Aircraft
You can also buyRF 315MHz Wireless Joystick Game Remote Controller Transceiver Kit here (Link) :
Description
This is wireless joystick remote kit that include a wireless joystick control board and a RF 433MHz receiver module.
Onboard one game joystick and 4 buttons. The shape of the PCB is suitable for your hands.
There is ATmega8A-AU chip onboard that has firmware. It will get position information of the thumb joystick and buttons and then send it out via RF transmitter onboard.
Every time the joystick change or one button is pressed or released, the MCU will send the information out.
NOTE1: This product does not include the battery, please know.
NOTE2: For the power for the remote control, you can use 3.7V lithium battery with XH2.54 connector. And You can refer to the red and black line order from the follow reference photo:
Features:
- Onboard MCU: ATmega8A
- Working voltage: 3-5.3V
- Working current: 42mA(max)
- Buttons: with beautiful color key cap and pins are all float, so you should pull up it in your MCU(Active low level output).
- Thumb joystick: great to control a smart car or 4-axis Aircraft.
- Onboard power supply socket: 2.54mm pitch
- Onboard power switch: turn on or turn off the power.
- Onboard PROGRAM header: burn bootloader and firmware
- Onboard transmitter: large power 433MHz transmitter module
- Transfer rate: 2000bps
- Transmission distance: When supply power is 5V, the open area transmission distance can be increased to 100 meters.
- Positioning hole diameter: 3.2mm
- Great for smart car, smart Aircraft projects
About receiver module:
- Compatible for Arduino
- Library: VirtualWire
- Operating voltage: 3 - 5.3VDC
- Working frequency: 433MHz
- Working Current: 2mA
- Sensitivity: -110db
- Transfer rate: 2000bps
- Antenna: Onboard 433MHz dedicated PCB Antenna
- Great for DIY project.
Photos
Part List (Schematics and program can be sent via e-mail,Please contact us)
1 x Remote control
1 x Receiver module
 
               
Please Note That (Note: After you buy the product, the documents can be send, Please contact us)
32857620956 - opensmart
32857620956

Hasonló kategóriák mint 16 :

Reviews

Write your review

PS2 joystick billentyűzet RF 433MHz vezeték nélküli joystick játék távirányító modul adó-vevő készlet intelligens

You can also buyRF 315MHz Wireless Joystick Game Remote Controller Transceiver Kit here (Link) :
Description
This is wireless joystick remote kit that include a wireless joystick control board and a RF 433MHz receiver module.
Onboard one game joystick and 4 buttons. The shape of the PCB is suitable for your hands.
There is ATmega8A-AU chip onboard that has firmware. It will get position information of the thumb joystick and buttons and then send it out via RF transmitter onboard.
Every time the joystick change or one button is pressed or released, the MCU will send the information out.
NOTE1: This product does not include the battery, please know.
NOTE2: For the power for the remote control, you can use 3.7V lithium battery with XH2.54 connector. And You can refer to the red and black line order from the follow reference photo:
Features:
- Onboard MCU: ATmega8A
- Working voltage: 3-5.3V
- Working current: 42mA(max)
- Buttons: with beautiful color key cap and pins are all float, so you should pull up it in your MCU(Active low level output).
- Thumb joystick: great to control a smart car or 4-axis Aircraft.
- Onboard power supply socket: 2.54mm pitch
- Onboard power switch: turn on or turn off the power.
- Onboard PROGRAM header: burn bootloader and firmware
- Onboard transmitter: large power 433MHz transmitter module
- Transfer rate: 2000bps
- Transmission distance: When supply power is 5V, the open area transmission distance can be increased to 100 meters.
- Positioning hole diameter: 3.2mm
- Great for smart car, smart Aircraft projects
About receiver module:
- Compatible for Arduino
- Library: VirtualWire
- Operating voltage: 3 - 5.3VDC
- Working frequency: 433MHz
- Working Current: 2mA
- Sensitivity: -110db
- Transfer rate: 2000bps
- Antenna: Onboard 433MHz dedicated PCB Antenna
- Great for DIY project.
Photos
Part List (Schematics and program can be sent via e-mail,Please contact us)
1 x Remote control
1 x Receiver module
 
               
Please Note That (Note: After you buy the product, the documents can be send, Please contact us)

Write your review