- -43%
OPEN-SMART SPP BLE vezeték nélküli Bluetooth-kompatibilis soros adó-vevő modul, kompatibilis a 3,3 V / 5 V-tal Arduino
OPEN-SMART SPP BLE vezeték nélküli Bluetooth-kompatibilis soros adó-vevő modul, kompatibilis a 3,3 V / 5 V-tal Arduino
633 Ft
43% megtakarítás
1 111 Ft
Nincs adó
Description
The serial port Bluetooth-compatible module is fully qualified V3.0 SPP V4.2 BLE with complete 2.4GHz radio transceiver and baseband. Your android or iOS phone can communicate with it to control your smart car or home appliances.
Note: Android phone only can use V3.0 SPP to communicate with the module, and iOS phone only can use BLE.
Product Features:
- protocol: v3.0 SPP v4.2 BLE
- Compatibility: can be directly connected for Arduino.
And compatible for Raspberry Pi, 51, AVR, STM32 board.
- Operating voltage: 3.1V - 5.5V (Onboard 3.3v LDO Regulator)
- Operating current: about 0.1mA when unpaired, paired 10mA
- Interface logic voltage: 3.3V / 5V compatible(Onboard level shift circuit)
- Logic Interface Type: UART TTL serial port
- Serial port baud rate: 9600 (default), can be modified to other values by AT command
- Effective Distance: Maximum 20 meters in open area
- After pairing, it can be used as a full-duplex serial port, without having to know any compatible protocol, but only supports 8 data bits, 1 stop bit, no parity bit communication format, which is the most commonly used communication format. It does not support other formats.
- When not establish a connection, you can set the baud rate, name, passkey via AT commands, parameter settings will be saved at power-down. After connection, it will automatically switch to transparent mode.
- Module role: Slave module. It can be paired with PC, Bluetooth-compatible hosts, most phones, PDA, PSP and other intelligent terminals whose Bluetooth-compatible is enable. Slave devices can not communicate with each other.
- The default password: 123456.
Photos
Part List (Schematics and program can be sent, Please contact us)
1 x Module
Please Note That (Note: After you buy the product, the documents can be send, Please contact us)
The serial port Bluetooth-compatible module is fully qualified V3.0 SPP V4.2 BLE with complete 2.4GHz radio transceiver and baseband. Your android or iOS phone can communicate with it to control your smart car or home appliances.
Note: Android phone only can use V3.0 SPP to communicate with the module, and iOS phone only can use BLE.
Product Features:
- protocol: v3.0 SPP v4.2 BLE
- Compatibility: can be directly connected for Arduino.
And compatible for Raspberry Pi, 51, AVR, STM32 board.
- Operating voltage: 3.1V - 5.5V (Onboard 3.3v LDO Regulator)
- Operating current: about 0.1mA when unpaired, paired 10mA
- Interface logic voltage: 3.3V / 5V compatible(Onboard level shift circuit)
- Logic Interface Type: UART TTL serial port
- Serial port baud rate: 9600 (default), can be modified to other values by AT command
- Effective Distance: Maximum 20 meters in open area
- After pairing, it can be used as a full-duplex serial port, without having to know any compatible protocol, but only supports 8 data bits, 1 stop bit, no parity bit communication format, which is the most commonly used communication format. It does not support other formats.
- When not establish a connection, you can set the baud rate, name, passkey via AT commands, parameter settings will be saved at power-down. After connection, it will automatically switch to transparent mode.
- Module role: Slave module. It can be paired with PC, Bluetooth-compatible hosts, most phones, PDA, PSP and other intelligent terminals whose Bluetooth-compatible is enable. Slave devices can not communicate with each other.
- The default password: 123456.
Photos
Part List (Schematics and program can be sent, Please contact us)
1 x Module
Please Note That (Note: After you buy the product, the documents can be send, Please contact us)
Biztonsági feltételek
Szállításii feltételek
Visszaküldési feltételek
