- -40%
GY-33 TCS34725 színérzékelő Azonosító felismerő érzékelők modul Cserélje ki a TCS230 TCS3200 GY 33 GY33 DIY
GY-33 TCS34725 színérzékelő Azonosító felismerő érzékelők modul Cserélje ki a TCS230 TCS3200 GY 33 GY33 DIY
767 Ft
40% megtakarítás
1 278 Ft
Nincs adó
CS34725 chip mcu color recognition sensor module, IIC or serial communication, directly output RGB value
1. It can be used as a simple TCS34725 module.
2. You can use the internal MCU to read the TCS34725 data, the MCU directly outputs RGB after calculation, the internal white balance program, and supports serial/IIC reading.
Provide 51 single-chip microcomputers, Arduino single-chip microcomputer, stm32 single-chip microcomputer, (IIC/serial port) communication read data program.
Overview
GY-33 is a low-cost color recognition sensor module. The working voltage is 3-5v, the power consumption is small, the volume is small, and the installation is convenient. Its working principle is that the illuminating LED emits light, and after illuminating the object to be measured, the return light passes through the filter to detect the RGB ratio value, and the color is identified according to the RGB ratio value.
This module has two ways to read data, namely serial UART (TTL level) or IIC (2-wire). The baud rate of the serial port is 9600bps and 115200bps, configurable, continuous, and query output. The settings can be saved after power-off. There are simple 7 kinds of color recognition, no need to calculate RGB value. It can adapt to different working environments and connect with a single-chip microcomputer and computer. The module can also set the operating mode of a separate sensor chip. As a simple sensor module, the MCU does not participate in the data processing. Provide Arduino, 51, stm32 MCU communication program,
The schematic diagram and the source code of the internal microcontroller are not provided.
Features
(1) High-cost performance
(2) Built-in MCU to calculate color
(3), IIC, serial communication format
(4) Adjustable LED brightness
(5), with corresponding upper computer software
Applications
(1) Intelligent robot
(2) Teaching laboratory equipment
(3) Product inspection of the production line
(4), colorimeter
(5), led color detection
Technical Parameters
Name
Parameter
Measuring range
RGB 0-255
Response frequency
10Hz
Working voltage
3~5V
Working current
15mA
Working temperature
-20℃ ~ 85℃
Storage temperature
24.3mm*26.7mm
Sensor chip
TCS34725
1. It can be used as a simple TCS34725 module.
2. You can use the internal MCU to read the TCS34725 data, the MCU directly outputs RGB after calculation, the internal white balance program, and supports serial/IIC reading.
Provide 51 single-chip microcomputers, Arduino single-chip microcomputer, stm32 single-chip microcomputer, (IIC/serial port) communication read data program.
Overview
GY-33 is a low-cost color recognition sensor module. The working voltage is 3-5v, the power consumption is small, the volume is small, and the installation is convenient. Its working principle is that the illuminating LED emits light, and after illuminating the object to be measured, the return light passes through the filter to detect the RGB ratio value, and the color is identified according to the RGB ratio value.
This module has two ways to read data, namely serial UART (TTL level) or IIC (2-wire). The baud rate of the serial port is 9600bps and 115200bps, configurable, continuous, and query output. The settings can be saved after power-off. There are simple 7 kinds of color recognition, no need to calculate RGB value. It can adapt to different working environments and connect with a single-chip microcomputer and computer. The module can also set the operating mode of a separate sensor chip. As a simple sensor module, the MCU does not participate in the data processing. Provide Arduino, 51, stm32 MCU communication program,
The schematic diagram and the source code of the internal microcontroller are not provided.
Features
(1) High-cost performance
(2) Built-in MCU to calculate color
(3), IIC, serial communication format
(4) Adjustable LED brightness
(5), with corresponding upper computer software
Applications
(1) Intelligent robot
(2) Teaching laboratory equipment
(3) Product inspection of the production line
(4), colorimeter
(5), led color detection
Technical Parameters
Name
Parameter
Measuring range
RGB 0-255
Response frequency
10Hz
Working voltage
3~5V
Working current
15mA
Working temperature
-20℃ ~ 85℃
Storage temperature
24.3mm*26.7mm
Sensor chip
TCS34725
Biztonsági feltételek
Szállításii feltételek
Visszaküldési feltételek