2 gombos távirányító 2db egycsatornás vezeték nélküli relé kapcsoló DC 12V 433M RF otthoni motoros ledhez
2 key Keyfob 2pcs one Channel Wireless Relay switch DC 12V 433M RF for home motor led
 
 
 
Typical applications:
DC 12V LED Light 
Remote control switch
Smart Home / Home Automation
Fluorescent lamp
DC 12 DC Motor,RS360
 
 
Wiring Diagram 1:
 
 
 
 
Wiring Diagram 2:
 
Product Name : 2 key Keyfob 2pcs one Channel Wireless Relay switch DC 12V 433M for home motor led
 
Packing list:
2 PCS DC 12V 433M RF 2 Channel Relay  Receiver
1 PCS  433M   Large Power 2 Button SC 2262 Remote Control (USE 12V 27A battery,Batteries not included)
 
 
 
 
 
Technical indicators:
operating voltage : DC 12V;
Operating frequency : 433.92MHz ;
Receiver sensitivity :-95dB;
Encoding: Receiver Recording;
Momentary / Latch / Toggle selectable (defult is  Momentary  , Latch Mode need 2 buttons handsender );
Learning function (can works with EV1527 and PT2262 remote, can store 16 pcs different code remote );
PCB Size:41×20×15mm;
Max load : 500W;
Normally, we would adapter remote control and receiver.
If the item you received has not been adapted Or you need to add accessories, Please follow the instructions below
Learning method and steps:
1 Clear the deposit information : Keep Pressing Learning Key,LED turns on , Wait 8-10 Seconds , LED turn off , that deposited information has been successfully cleared
 
2 Press the learning button and LED on the receiver will light up, enter the learning state.
 
3 Press the key you want to learn on remote control within 2-5 seconds , LED flash 3 times and then turn off , then it have success in learning .
Relay mode :
Normally close (NC ) ;
Normally open (NO ) ;
Normally-open (NO) contacts connect the circuit when the relay is activated; the circuit is disconnected when the relay is inactive. It is also called a Form A contact or "make" contact. NO contacts may also be distinguished as "early-make" or NOEM, which means that the contacts close before the button or switch is fully engaged.
Normally-closed (NC) contacts disconnect the circuit when the relay is activated; the circuit is connected when the relay is inactive. It is also called a Form B contact or "break" contact. NC contacts may also be distinguished as "late-break" or NCLB, which means that the contacts stay closed until the button or switch is fully disengaged.
Work mode (programmable ):
singnal Non-locking (Momentary    is defult )
singnal Self-locking (Toggle  )
singnal Inter-locking (Latch)
Work Mode can be adjustable by jumper,Please operation under power off
 
Work mode explanation:
Momentary------------Press the Transmitter button A, the receiver relay A is ON, release button A; the receiver relay A is OFF, the same as B/C/D ,Every channel is Independent ;
 
Toggle---------------Press transmitter button A for 1 time , the receiver relay A is ON, press button A again, the receiver relay A is OFF, the same as B/C/D. Every channel is Independent ;
  
Latched------------------
Press transmitter button A, the receiver relay A is ON, the relay B/C/D is OFF.
Press transmitter button B, the receiver relay B is ON, the relay A/C/D is OFF.
Press transmitter button C, the receiver relay C is ON, the relay A/B/D is OFF
Press transmitter button D, the receiver relay D is ON, the relay A/B/C is OFF.
 
433M 2 Button EV1527 Remote Control:
 
Power supply : 12V 27A battery  replacable .(This remote doesnot have a battery , Please buy in your local market )
Operating current:  ≤ 12mA ;
Oscillation mode:  SAW resonator ;
Oscillation resistor : 330K
Modulation mode: ASK OOK ;
Operating frequency: 433.92MHz  ;
Frequency dev iation: ±0.2MHz ;
Encoding format: Million  Group Code (  EV1527 ) ;
Transmit power: 10 mW.
Data Rate : 50~60KHZ;
  
 
 
 
32372873657/1 - shop1525466