- -40%
Fekete szín - XY-P15W sztereó Bluetooth teljesítményerősítő kártya 12V/24V nagy teljesítményű digitális
Fekete szín - XY-P15W sztereó Bluetooth teljesítményerősítő kártya 12V/24V nagy teljesítményű digitális
394 Ft
40% megtakarítás
657 Ft
Nincs adó
Transmission distance 15 meters (visible without obstruction)
Number of channels: two channels (stereo)
Module protection mechanism Power supply reverse connection protection short circuit protection self-recovery overheating protection
Product model XY-P15W
Working voltage DC: 8~24V
Bluetooth version 5.0
Precautions for use:
1. Use the power amplifier board as far away as possible from the WIFI signal (router)
2. The recommended power supply voltage is DC 8~24V. If it exceeds 26V, the chip will burn.
3. The power supply does not exceed 12V when connected to a 4ohm speaker, and does not exceed 24V when connected to an 8ohm speaker
4. The power supply current is recommended to be above 2A.
5. The working power of the module exceeds 20W*2, and a heat sink is required
6. The speaker wire should not be too long, and ensure that it is suitable within 1 meter
7. Pay attention to static electricity protection. Before touching the power amplifier board, discharge the static electricity on your hands to prevent static electricity from breaking down the chip. The Bluetooth chip is more sensitive to static electricity.
8. It is recommended to adapt the speaker with a rated power of 30W and above to avoid the speaker from heating and burning
Colour:black
Material:plastic
Size: 50 x 35mm
Package Contents:
1 x Bluetooth digital power amplifier module
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.
Number of channels: two channels (stereo)
Module protection mechanism Power supply reverse connection protection short circuit protection self-recovery overheating protection
Product model XY-P15W
Working voltage DC: 8~24V
Bluetooth version 5.0
Precautions for use:
1. Use the power amplifier board as far away as possible from the WIFI signal (router)
2. The recommended power supply voltage is DC 8~24V. If it exceeds 26V, the chip will burn.
3. The power supply does not exceed 12V when connected to a 4ohm speaker, and does not exceed 24V when connected to an 8ohm speaker
4. The power supply current is recommended to be above 2A.
5. The working power of the module exceeds 20W*2, and a heat sink is required
6. The speaker wire should not be too long, and ensure that it is suitable within 1 meter
7. Pay attention to static electricity protection. Before touching the power amplifier board, discharge the static electricity on your hands to prevent static electricity from breaking down the chip. The Bluetooth chip is more sensitive to static electricity.
8. It is recommended to adapt the speaker with a rated power of 30W and above to avoid the speaker from heating and burning
Colour:black
Material:plastic
Size: 50 x 35mm
Package Contents:
1 x Bluetooth digital power amplifier module
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.
Biztonsági feltételek
Szállításii feltételek
Visszaküldési feltételek
