- -25%
![](https://mikroelektronik.hu/1870087-large_default/-nagy-teljesitmenyu-intelligens-auto-motoros-meghajto-modul-bts7960-43a-felvezeto-hutohajtashoz.jpg)
! Nagy teljesítményű intelligens autó motoros meghajtó modul BTS7960 43A félvezető hűtőhajtáshoz
! Nagy teljesítményű intelligens autó motoros meghajtó modul BTS7960 43A félvezető hűtőhajtáshoz
529 Ft
25% megtakarítás
705 Ft
Nincs adó
skype : wingxine Request datasheet and demo video.
BTS7960B H-bridge 43A high-power motor driver Module Overview:
This driver uses Infineon chips BTS7960 composed of high-power drive full H-bridge driver module with thermal over-current protection. Double BTS7960 H-bridge driver circuit, with a strong drive and braking, effectively isolating the microcontroller and motor driver! High-current 43A
Features:
Double BTS7960 large current (43 A) H bridge driver;
5V isolate with MCU, and effectively protect MCU;
5V power indicator on board;
voltage indication of motor driver output end;
can solder heat sink;
Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2);
isolation chip 5 V power supply (can share with MCU 5 V);
size: 4 * 5 * 1.2 cm;
Able to reverse the motor forward, two PWM input frequency up to 25kHZ;
two heat flow passing through an error signal output;
isolated chip 5V power supply (can be shared with the MCU 5V), can also use the on-board 5V supply;
the supply voltage 5.5V to 27V;
BTS7960B H-bridge 43A high-power motor driver Module Overview:
This driver uses Infineon chips BTS7960 composed of high-power drive full H-bridge driver module with thermal over-current protection. Double BTS7960 H-bridge driver circuit, with a strong drive and braking, effectively isolating the microcontroller and motor driver! High-current 43A
Features:
Double BTS7960 large current (43 A) H bridge driver;
5V isolate with MCU, and effectively protect MCU;
5V power indicator on board;
voltage indication of motor driver output end;
can solder heat sink;
Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2);
isolation chip 5 V power supply (can share with MCU 5 V);
size: 4 * 5 * 1.2 cm;
Able to reverse the motor forward, two PWM input frequency up to 25kHZ;
two heat flow passing through an error signal output;
isolated chip 5V power supply (can be shared with the MCU 5V), can also use the on-board 5V supply;
the supply voltage 5.5V to 27V;
![](/modules/blockreassurance/img/ic_verified_user_black_36dp_1x.png)
Biztonsági feltételek
![](/modules/blockreassurance/img/ic_local_shipping_black_36dp_1x.png)
Szállításii feltételek
![](/modules/blockreassurance/img/ic_swap_horiz_black_36dp_1x.png)
Visszaküldési feltételek