AC 220V 433Mhz vezeték nélküli távirányító kapcsoló RF relé vevő LED lámpához Smart Home
AC 220V 433Mhz Wireless Remote Control Switch RF Relay Receiver for LED Lamp Smart Home
 
 
Typical applications:
  
Remote control switch
Smart Home / Home Automation
LED lighting
Fluorescent lamp
220V AC Motor(<500W)
 
 
 
Product Name : AC 220V 433Mhz Wireless Remote Control Switch RF Relay Receiver for LED Smart Home lamp
 
Packing list:
1 PCS 433M 1 Channel  Receiver
1 PCS 433M PT2262 Remote Control
 
Technical indicators:
operating voltage : AC 220V;
Operating frequency : 433.92MHz ;
Receiver sensitivity :-95dB;
Encoding: Receiver Recording;
Momentary / Latch / Toggle selectable (defult is  Toggle  , Latch Mode need 2 buttons handsender );
Output mode : Relay switch;
Receiver size: 62 * 35 * 22 mm;
Max load : 500W;
 
Advantage :
1: Receiver Mother board have a learning key , if the remote is lost , must buy EV1527 OR Pt2262 remotes to re-learn;
 
Work mode (programmable )
singnal Inter-locking (Latch)
singnal Self-locking (Toggle   is defult )
singnal Non-locking (Momentary )
 
Work mode explanation:
Momentary------------Press the Transmitter button A, the receiver relay A is ON, release button A; the receiver relay A is OFF, the same as B/C/D ,Every channel is Independent ;
 
Toggle---------------Press transmitter button A for 1 time , the receiver relay A is ON, press button A again, the receiver relay A is OFF, the same as B/C/D. Every channel is Independent ;
  
Latched------------------
Press transmitter button A, the receiver relay A is ON, the relay B/C/D is OFF.
Press transmitter button B, the receiver relay B is ON, the relay A/C/D is OFF.
Press transmitter button C, the receiver relay C is ON, the relay A/B/D is OFF
Press transmitter button D, the receiver relay D is ON, the relay A/B/C is OFF.
 
 
Program steps :
1: keep pressing learning key on the receiver controller ,
LED turn on after 2 second , then turn off after 4 second, then the receiver controller enter programming state , but not release the finger , still keep pressing the learning button , 
LED blink once after 2 second , release the finger on learing key , it is Momentary mode , 
or still keep pressing learing key ,
LED blink twice after 2 second , release the finger on learing key , it is Toggle mode ,
or still keep pressing learing key ,
LED blink 3 times after 2 second , release the finger on learing key , it is Latch mode ,
 
Learning method and steps
Keep pressing learnig key on receiver controller board , LED turn on after 2 seconds , release the finger on learning key , press the key on remote , work state LED blink 3 times , it means learnig successfully ;
Clear the deposit information
Keep pressing learnig key on receiver controller board, LED turn on after 2 seconds , then turn off after 4 seconds , it means clearing successfully .
 
 
433M PT2262 Remote Control:
Technical Data :
Power supply : DC6V , 2 pcs CR2016 replacable .(This remote doesnot have a battery , Please buy in your local market );
Operating current:  ≤ 18mA;
Oscillation mode:  SAW resonator;
Modulation mode: ASK/OOK;
Operating frequency: 433.92MHZ  ;
Encoding IC : PT2260 fixed code (compatiable for PT2262 PT2264 SC2260 SC2262);
Output power :  9dBm (8mW) ;
Data Rate : <10Kbps ;
RC Resistance :  4.7M ;
 
32332787347/2 - shop1525466