Kereskedelmi, irodai és ipari

 
Typical applications:
DC 12V Home lighting system 
Remote control switch
Smart Home / Home Automation
Garage Door
Fluorescent lamp Illumination
Motorcycle Electromobile
Remote controlled gates
Security Monitoring
LED lighting
Fluorescent lamp
DC 12 DC Motor,RS360
 
 
Wiring Diagram 1:
DC 12V control circuit,Wiring diagram below. "LOAD" may be LED lamp, fans, motors and other DC 12V Electrical equipment
 
 
 
 
Wiring Diagram 2:
DC 1-48V OR AC 85-265V control circuit,Wiring diagram below(Note:If not DC 12V load, need another DC 12V power supply). "LOAD" may be LED lamp, fans, motors and other DC AC equipment
 
  
Product Name : 1-5000 seconds Adjustable Wireless Delay Switch Smart Home Kit ( DC 12V RF Relay Timer 4x 433M EV1527 Keyfob )
 
Packing list:
1 PCS 433M DC 12V one Channel Delay Switch
4 PCS  433M    2 Button EV1527  Remote Control (USE 12V 27A battery,Batteries not included)

 
 
receiver Features:
 
1 Operating voltage:  DC 12V;DC 5V version can be customized
 
2 Operating Current: relays close, about 9MA; relay open,about 42MA;
 
3 Operating frequency: 433.92M; 315M version can be customized                 
 
4 Receiver sensitivity : -108dBm
 
5 Decode  : learning code, can be adapted EV1527 / PT2262 and compatible remote control, you can store up to 32 remote control
 
6 Work mode : Non-locking (Momentary is defult),Self-locking (Toggle),Inter-locking (Latch),Delay; 1-5000 seconds adjustable delay time, minimum step 0.1 seconds
 
7 Size(Including housing)50*35*22mm
 
8 Weight(including housing) 30g
 
9 Relay Maximum load(Recommended<5A):10A/250VAC,10A/125VAC,10A/30VDC, 10A/28VDC,10A/12VDC
 
 
Work mode
NO          : Relay normally open contact
COM       : Relay common contact
NC          : Relay normally closed contact
Open       : NO connection COM, NC disconnect COM
Close      : NO disconnect COM, NC connection COM
Momentary  : Press the Transmitter button , the receiver relay is Open, release button;the relay  is Close;
Toggle        : Press transmitter button for 1 time , the receiver relay is Open, press button again, the relay  is Close;
Latched       : Press transmitter button A, the receiver relay is Open  Press transmitter button B, the receiver relay is Close.
Delay           : Press the Transmitter button, the receiver relay Open,After a set time delay, the receiver relay  is Close;
 
If during the delay, press the button of Transmitter, delay start again; if the delay period, press and hold  the button of Transmitter 3-4 seconds, the receiver controller stops the delay, the relay Close
 
Adapter remote control (learning remote control):
Under normal operating mode, LED will be lit, when receives a valid remote control (EV1527 / PT2262) button values, LED flashes
 
Clean code: press the key and held down, LED off, LED will light about 8 seconds later, clean code is completed (Note: After performing clean code previously stored remote control value does not exist)
 
Step 1 (into the learning mode): Press the key (about 1 second), LED off;
Step 2 (adapter button): Then press the utton on the remote control, LED flashes four times on, then learning the button value
 
Note: 
Only the Non-locking (Momentary is defult),Self-locking (Toggle),Inter-locking (Latch) mode to a "clear code" and " learning " action
 In the "delay" mode can only set the delay time
 
 
Delay setting:
Step 1, the mode is set to "delay" mode (jumper cap on the M1 into two rows of pins)
Step 2, press the key until the LED is off
Step 3. Click the key again, LED flashes
Step 4. Click the key again after a period of time, LED light
LED blinking time is the delay time.
 
 
Power supply : 12V 27A battery   replacable  . (This remote doesnot have a battery , Please buy in your local market )
Operating current:  ≤ 12mA ;
Oscillation mode:  SAW resonator ;
Oscillation resistor : 330K
Modulation mode: ASK OOK ;
Operating frequency: 433.92MHz  ;
Frequency dev iation: ±0.2MHz ;
Encoding format: Million  Group Code (  EV1527 ) ;
Transmit power: 10 mW.
Data Rate : 50~60KHZ;
  
 
 

 
 
Typical applications:
  
Remote control switch
Smart Home / Home Automation
LED lighting
3d printer
Fluorescent lamp
220V AC Motor(<500W)
 
 
 
Product Name : 433Mhz 4 Key EV1527 Remote Control 4pcs one Channel Relay Wireless Controller AC Smart Switch kit
 
Packing list:
4 PCS 433M 220V 1 Channel  Relay Receiver
1 PCS 433M 4 Key Remote Control
 
 
Technical indicators:
 
Operating voltage : AC 180~250V(Default 220V);
Operating frequency : 433.92MHz ;
Receiver sensitivity :-95dB;
Decoder  : EV1527 PT2262 PT2264;
Momentary / Latch / Toggle selectable (defult is  Toggle  , Latch Mode need 2 buttons handsender );
Input : 220V;
Output : 220V With Switch;
Receiver size: 62 * 35 * 22 mm;
Max load : 500W;
 
Advantage :
1: Receiver Mother board have a learning key , if the remote is lost , must buy EV1527 OR Pt2262 remotes to re-learn;
 
Work mode (programmable )
singnal Inter-locking (Latch)
singnal Self-locking (Toggle   is defult )
singnal Non-locking (Momentary)
 
Work mode explanation:
Momentary------------Press the Transmitter button A, the receiver relay A is ON, release button A; the receiver relay A is OFF, the same as B/C/D ,Every channel is Independent ;
 
Toggle---------------Press transmitter button A for 1 time , the receiver relay A is ON, press button A again, the receiver relay A is OFF, the same as B/C/D. Every channel is Independent ;
  
Latched------------------
Press transmitter button A, the receiver relay A is ON, the relay B/C/D is OFF.
Press transmitter button B, the receiver relay B is ON, the relay A/C/D is OFF.
Press transmitter button C, the receiver relay C is ON, the relay A/B/D is OFF
Press transmitter button D, the receiver relay D is ON, the relay A/B/C is OFF.
 
Normally, we would adapter remote control and receiver.
If the item you received has not been adapted Or you need to add accessories, Please follow the instructions below
 
Program steps :
1: keep pressing learning key on the receiver controller ,
LED turn on after 2 second , then turn off after 4 second, then the receiver controller enter programming state , but not release the finger , still keep pressing the learning button , 
LED blink once after 2 second , release the finger on learing key , it is Momentary mode , 
or still keep pressing learing key ,
LED blink twice after 2 second , release the finger on learing key , it is Toggle mode ,
or still keep pressing learing key ,
LED blink 3 times after 2 second , release the finger on learing key , it is Latch mode ,
 
Learning method and steps
Keep pressing learnig key on receiver controller board , LED turn on after 2 seconds , release the finger on learning key , press the key on remote , work state LED blink 3 times , it means learnig successfully ;
Clear the deposit information
Keep pressing learnig key on receiver controller board, LED turn on after 2 seconds , then turn off after 4 seconds , it means clearing successfully .
 
  
433M 4 Button EV1527 Remote Control:
 
Technical Data :
 
Power supply : 12V 27A battery  replacable .(This remote doesnot have a battery , Please buy in your local market )
Operating current:  ≤ 12mA ;
Oscillation mode:  SAW resonator ;
Oscillation resistor : 330K
Modulation mode: ASK ;
Operating frequency: 433.92MHz  ;
Frequency dev iation: ±0.2MHz ;
Encoding format: Million  Group Code (  EV1527 ) ;
Transmit power: 10 mW.
Data Rate : 50~60KHZ;
 
 

Below item is powered by Canton-electronics Ltd .
 
​Note: Adjustable resistors (potentiometers) are components that are easily damaged. Use a suitable screwdriver to slowly rotate. Click here to buy a screwdriver.
 
Kit No: RT391 433MHz
pakcing list :  1 pcs receiver 1 pcs transmitter 
 
 Receiver :
 
Module No.: RF11A04
 
Description:
Model No.: RF11A04 OR CE-RF11A-045V
1. Features:
Operating voltage: DC 3-5V
Operating current: less 11mA (DC 5V)
Working priceple: super heterodyne
modulation Mode: OOK / ASK
Operating Frequency : 433.92MHZ
Receiving sensitivity: -108dBm
Output level: 5V TTL level, low standby, the maximum current 20MA (to add a current-limiting resistor)
Decode: learning code, adapted EV1527 / PT2262 and a compatible remote control, you can store up to eight remote control
Working modes: Non-locking (Momentary ), self-locking (Toggle), Inter-locking; 0.1-500000 seconds adjustable delay time
Size: 30x12.1x12.5mm
Weight: 4 grams or less
 
 
2. Pin Description
G: GND pin, DC 3-5V power supply negative
V: VCC pin, DC 3-5V positive power supply
D0: channel 1 output, active high
D1: channel 2 output, active high
D2: Channel 3 output, active high
D3: Channel 4 output, active high
VT: channel output valid signal, the microcontroller can be used as an interrupt signal
 
3. the working mode
 
You can select different modes of operation with"M4 M3 M2 M1 M0" pad in the delay mode to adjust the delay time through an adjustable resistor.
In delay mode, the rotary variable resistor can adjust the delay time. Increase the time counterclockwise rotation, and clockwise rotation to shorten the time. Adjustable resistor is a precision resistor, adjust the time with a Phillips screwdriver to gently rotate (do not use excessive force)
Working Mode Description:
Non-locking: Press the remote control button, the IO port outputs high. Release the remote control button, IO port outputs low.
Self-locking: Press the remote control button, the IO port outputs high. Press the remote control button again, IO port outputs low.
Interlock: Press the remote control button D0, D0 IO port outputs high, other IO ports outputs low; remote control button is pressed D1, D1 IO port outputs high, other IO ports output low and so on.
Delay: Under Delay mode, there is a delay 0/1/2/3/4 five sub-patterns, by adjusting the variable resistor IO port high duration
4, the adapter remote control (learning remote control)
In normal operation mode, LED (D1) will be lit, when receiving a valid remote control (EV1527 / PT2262) key value, LED will flash.
Clean code: hold the button to press.LED offs, keep pressing about 8 seconds until LED lights. At that time, clean code completion (Note: After the implementation of clean code, previous remote controls do not exist.
Adaptation (learning):
Step 1 (into the learning mode):trigger the key button, LED offs;
Step 2 (adapter channel 1): press the first button of remote control and then, LED offs after flashes for four times. This time means that it had learned the value of the first button
Step 3 (Adaptation Channel 2): Press the second remote control, LED offs after flashes 4 times, This time means that it had learned the value of the second button
Step 4 (adapter Channel 3): Then press the remote's third button, LED offs after flashes 4 times, This time means that it had learned the value of the third button
Step 5 (Adaptation Channel 4): Then press the remote control's fourth button, LED lights after flashes 4 times, This time means that it had learned the value of the fourth button.
NOTE: The process must be completed within 15 seconds
 
Adaptation Video,Click here!
 
5. Wiring Diagram :
Control LED indicator: see "RF11A04_LED demo"
Control 12V Relay: See "RF11A04_4Relay demo"
Click here for more help!
 
 
 
Connect with ardiuno :
 
 
 
 
 
 
Transmitter remotes:
 
Model No.
TB416 Encoder Transmitter
Function discription
Encoder Transmitter modules
Operating voltage
9V DC
Work current
>100mA
Operating frequency
433MHz
modulation Mode
ASK/OOK
SAW Frequency stability
±150kHz(max)
Transmitter power
>55mW
Data rate
≤10Kbps
Antenns length

24 cm (315 MHz), 18 cm (433.92 MHz)
Dimension
49*31*8mm
Encodeing format SC2262 fixing code (same as PT2264 PT2262 )   ,Work with PT2272 decoder IC
Transmitter distance 1000Meter (open area)
 
Connect to MCU or Ardiuno :
 
Connect to Switch:
 
 

Below item is powered by Canton-electronics Ltd .
 
​Note: Adjustable resistors (potentiometers) are components that are easily damaged. Use a suitable screwdriver to slowly rotate. Click here to buy a screwdriver.
 
Modules No: RT388
 
1 pcs Super-Heterodyne decoder receiver and 1 pcs 8 buttons PT2262 encoder transmitter ;
 
 
Receiver :
 
Module No.: RF11A04
 
Description:
Model No.: RF11A04 OR CE-RF11A-045V
1. Features:
Operating voltage: DC 3-5V
Operating current: less 11mA (DC 5V)
Working priceple: super heterodyne
modulation Mode: OOK / ASK
Operating Frequency : 433.92MHZ
Receiving sensitivity: -108dBm
Output level: 5V TTL level, low standby, the maximum current 20MA (to add a current-limiting resistor)
Decode: learning code, adapted EV1527 / PT2262 and a compatible remote control, you can store up to eight remote control
Working modes: Non-locking (Momentary ), self-locking (Toggle), Inter-locking; 0.1-500000 seconds adjustable delay time
Size: 30x12.1x12.5mm
Weight: 4 grams or less
 
 
2. Pin Description
G: GND pin, DC 3-5V power supply negative
V: VCC pin, DC 3-5V positive power supply
D0: channel 1 output, active high
D1: channel 2 output, active high
D2: Channel 3 output, active high
D3: Channel 4 output, active high
VT: channel output valid signal, the microcontroller can be used as an interrupt signal
 
3. the working mode
 
You can select different modes of operation with"M4 M3 M2 M1 M0" pad in the delay mode to adjust the delay time through an adjustable resistor.
In delay mode, the rotary variable resistor can adjust the delay time. Increase the time counterclockwise rotation, and clockwise rotation to shorten the time. Adjustable resistor is a precision resistor, adjust the time with a Phillips screwdriver to gently rotate (do not use excessive force)
Working Mode Description:
Non-locking: Press the remote control button, the IO port outputs high. Release the remote control button, IO port outputs low.
Self-locking: Press the remote control button, the IO port outputs high. Press the remote control button again, IO port outputs low.
Interlock: Press the remote control button D0, D0 IO port outputs high, other IO ports outputs low; remote control button is pressed D1, D1 IO port outputs high, other IO ports output low and so on.
Delay: Under Delay mode, there is a delay 0/1/2/3/4 five sub-patterns, by adjusting the variable resistor IO port high duration
4, the adapter remote control (learning remote control)
In normal operation mode, LED (D1) will be lit, when receiving a valid remote control (EV1527 / PT2262) key value, LED will flash.
Clean code: hold the button to press.LED offs, keep pressing about 8 seconds until LED lights. At that time, clean code completion (Note: After the implementation of clean code, previous remote controls do not exist.
Adaptation (learning):
Step 1 (into the learning mode):trigger the key button, LED offs;
Step 2 (adapter channel 1): press the first button of remote control and then, LED offs after flashes for four times. This time means that it had learned the value of the first button
Step 3 (Adaptation Channel 2): Press the second remote control, LED offs after flashes 4 times, This time means that it had learned the value of the second button
Step 4 (adapter Channel 3): Then press the remote's third button, LED offs after flashes 4 times, This time means that it had learned the value of the third button
Step 5 (Adaptation Channel 4): Then press the remote control's fourth button, LED lights after flashes 4 times, This time means that it had learned the value of the fourth button.
NOTE: The process must be completed within 15 seconds
 
Adaptation Video,Click here!
 
5. Wiring Diagram :
Control LED indicator: see "RF11A04_LED demo"
Control 12V Relay: See "RF11A04_4Relay demo"
Click here for more help!
 
 
 
Connect with ardiuno :
 
 
 
 
Transmitter :
 
Features / Specifications :
1. 4 buttons;
2. High stability, SMT chip, frequency stabilization SAW, ultra-high-frequency transistor;
3: Large power;
 
Technical Data :
Transmitter Module No.: TB420;
Power supply : 12V 23A battery (not included )  ,
 
Operating current: 28-33mA;
Oscillation mode: SAW resonator;
Modulation mode:ASK/OOK;
Operating frequency:433.92MHZ ;
Encoding format: SCT2260  fixed code (compatiable for PT2262 SC2262 PT2260 PT2264 , can work with PT2272-M4 ,PT2272-T4,PT2272-L4 );
RC  Resistance : 4.7M; 
Transmit power : 200mW ;
 

Product Name: Cyclone IV FPGA Board EP4CE6E22C8N EP4CE6 Development ALTERA Cyclone4 PLD NiosII Core Board CPLD PLD SOPC SOC ASIC Button LED
 
 
 
 
 
 
 
Module No.: TB276
 
 
 
Packing list:
 
 
 
 
 
1 PCS EP4CE6E22C8N core board;
 
1 pcs USB to Mini 5P wire .
 
 
 
 
 
 
Description:
 
 
 
 
1.Based on Altera Cyclone IV EP4CE6E22C8N FPGA Chip;
 
2.Configuration Flash chip M25P40(Fully compatible EPCS4), size :4M bit;
 
3.Onboard 50MHz active patch oscillator;
 
4.Onboard 8 LEDs and 2 Buttons.
 
5.Leads the remaining IO, JTAG and AS download port;
 
6.USB Power, DC5V supply;
 
7.Low-cost and efficient power supply design;
 
8.High-quality tantalum capacitor power supply filtering;
 
9.Development of embedded CPU support NiosII;
 
10.2.54mm header pitch design, suitable for being plugged-in your application system;
 
 
 
11.Board size: 60*52MM;
 
 
 
Diagram : Please contact me on ebay message for diagram after your order !
 
 
 
front :
 
Back :
 
 
 
 
 
 
 
 
 
 
 
 
Accessories:  1 pcs USB to Mini 5P power wire ;
 
 
 
 
 
 
 
 
 
 
 
 
Typical Application (USB Blaster Downloader , Click here):
 
 
 
 
 
 
 
 
 
 
 

Work mode
   
 
 
Typical applications:
DC 12V Home lighting system 
Garage Door
Elevators
Motor reversing control
Remote control switch
Smart Home / Home Automation
LED lighting
Fluorescent lamp
DC 12 DC Motor,RS360
 
 
Wiring Diagram 1:
DC 12V control circuit,Wiring diagram below. "LOAD" may be LED lights, fans, motors and other DC 12V
 
 
 
 
Wiring Diagram 2:
DC 1-48V OR AC 85-265V control circuit,Wiring diagram below(Note:If not DC 12V load, need another DC 12V power supply). "LOAD" may be LED lights, fans, motors and other DC AC equipment
  
Product Name : 315M DC 12V 2Ch RF Wireless Delay Timer Self-locking Momentary Interlock Multifunction Relay Switch 
 
Packing list:
1 PCS 315M DC 12V 2 Channel Multifunction Wireless Controller 
2 PCS  315M  2 Button EV1527  Remote Control (USE 12V 27A battery,Batteries not included)
 
 
 
Technical indicators:
Operating voltage : DC 9-13V (recommended DC 12V);
Operating Current : All relays close,about 14MA; one relay open,about 43MA;two relay  open,about 71MA
Operating frequency : 315M 
Receiver sensitivity  : -108dB;
Work mode       : Non-locking (Momentary is defult),Self-locking (Toggle),Inter-locking (Latch),  Delay;Each channel independently set the Work mode; 500,000 seconds maximum delay
 
Size(Including housing)  : 75*54*28mm
Learning function (can works with EV1527 and PT2262 remote, can store 16 pcs different code remote );
Max load : 500W;
  
Normally, we would adapter remote control and receiver.
If the item you received has not been adapted Or you need to add accessories, Please follow the instructions below
Learning method and steps:
Under normal operating mode, LED will be lit, when receives a valid remote control (EV1527 / PT2262) button values, LED flashes
   
Clean code: press the button and held down, LED off, LED will light about 8 seconds later, clean code is completed (Note: After performing clean code previously stored remote control value does not exist)
     
Step 1 (into the learning mode): Press the button (about 1 second), LED off;
Step 2 (adapter channel 1): Then press the first button on the remote control, LED flashes four times off, then learning the first button value
Step 3 (Adaptation Channel 2): Then press the second button on the remote control, LED flashes four times brighter, then learned two key values
 
Use more details, please click here!
 
 

 
 
315M 2 Button EV1527 Remote Control:
 
Power supply : 12V 27A battery  replacable .(This remote doesnot have a battery , Please buy in your local market )
Operating current:  ≤ 12mA ;
Oscillation mode:  SAW resonator ;
Oscillation resistor : 330K
Modulation mode: ASK OOK ;
Operating frequency: 315MHz  ;
Frequency dev iation: ±0.2MHz ;
Encoding format: Million  Group Code (  EV1527 ) ;
Transmit power: 10 mW.
Data Rate : 50~60KHZ;
  
 
 
 

 
Product Name: DC 12V 8Ch RS485 Bus Modbus RTU Relay Module with TVS protected
 
 
 
Package inlcuded:
  1PCS DC 12V Channel RS485 Relay Switch Module Board
 
 
Description:
 
1: Working voltage DC 12V;
2: Standby current (all relays closed) 12MA, 1 relay open 40MA, 2 relays open 69MA, 3 relays open 95MA,4 relays open 122MA,5 relays open 149MA,6 relays open 174MA, 7 relays open 198MA,8 relays open 225MA
 
3: Enhanced RS485 interface protection (TVS)
 
4: ''open'' ''close'' ''Momentary'' ''Self-locking'' ''Interlock'' ''Delay'' 6 Commands
5: MODBUS RTU command, Support 03 06 16 function code
6: Under the ''Delay'' command ,the maximum delay is 255 seconds;
 
7 MODBUS commands can be made serial HyperTerminal (serial assistant) OR ''Modbus Poll'' Enter;
 
8 Under the MODBUS command mode, it can support up to 64 devices in parallel
 
9 The default baud rate is 9600BPS. The baud rate can be selected through jumpers: 2400 4800 9600 19200BPS
 
10 Size: 145*90*40mm
 
11 Weight: 218g
 
12 Maximum load: 10A / 250VAC, 10A / 125VAC, 10A / 30VDC, 10A / 28VDC, 10A / 12VDC
 
For more information, please contact me
 
Application
 
PLC Output expansion board
Smart Home,Home Automation ,Wiser Home;
PTZ CCTV Camera
Security Monitoring
Identification system;
Motor FW & BW
Automatic curtain control
 
 
 

Below item is powered by Canton-electronics Ltd .
 
Note: Adjustable resistors (potentiometers) are components that are easily damaged. Use a suitable screwdriver to slowly rotate. Click here to buy a screwdriver.
 
Modules No: RT386
 
1 pcs Super-Heterodyne decoder receiver and 1 pcs 8 buttons PT2262 encoder transmitter ;
 
 
Receiver :
 
Module No.: RF11A04
 
Description:
Model No.: RF11A04 OR CE-RF11A-045V
1. Features:
Operating voltage: DC 3-5V
Operating current: less 11mA (DC 5V)
Working priceple: super heterodyne
modulation Mode: OOK / ASK
Operating Frequency : 433.92MHZ
Receiving sensitivity: -108dBm
Output level: 5V TTL level, low standby, the maximum current 20MA (to add a current-limiting resistor)
Decode: learning code, adapted EV1527 / PT2262 and a compatible remote control, you can store up to eight remote control
Working modes: Non-locking (Momentary ), self-locking (Toggle), Inter-locking; 0.1-500000 seconds adjustable delay time
Size: 30x12.1x12.5mm
Weight: 4 grams or less
 
 
2. Pin Description
G: GND pin, DC 3-5V power supply negative
V: VCC pin, DC 3-5V positive power supply
D0: channel 1 output, active high
D1: channel 2 output, active high
D2: Channel 3 output, active high
D3: Channel 4 output, active high
VT: channel output valid signal, the microcontroller can be used as an interrupt signal
 
3. the working mode
 
You can select different modes of operation with"M4 M3 M2 M1 M0" pad in the delay mode to adjust the delay time through an adjustable resistor.
In delay mode, the rotary variable resistor can adjust the delay time. Increase the time counterclockwise rotation, and clockwise rotation to shorten the time. Adjustable resistor is a precision resistor, adjust the time with a Phillips screwdriver to gently rotate (do not use excessive force)
Working Mode Description:
Non-locking: Press the remote control button, the IO port outputs high. Release the remote control button, IO port outputs low.
Self-locking: Press the remote control button, the IO port outputs high. Press the remote control button again, IO port outputs low.
Interlock: Press the remote control button D0, D0 IO port outputs high, other IO ports outputs low; remote control button is pressed D1, D1 IO port outputs high, other IO ports output low and so on.
Delay: Under Delay mode, there is a delay 0/1/2/3/4 five sub-patterns, by adjusting the variable resistor IO port high duration
4, the adapter remote control (learning remote control)
In normal operation mode, LED (D1) will be lit, when receiving a valid remote control (EV1527 / PT2262) key value, LED will flash.
Clean code: hold the button to press.LED offs, keep pressing about 8 seconds until LED lights. At that time, clean code completion (Note: After the implementation of clean code, previous remote controls do not exist.
Adaptation (learning):
Step 1 (into the learning mode):trigger the key button, LED offs;
Step 2 (adapter channel 1): press the first button of remote control and then, LED offs after flashes for four times. This time means that it had learned the value of the first button
Step 3 (Adaptation Channel 2): Press the second remote control, LED offs after flashes 4 times, This time means that it had learned the value of the second button
Step 4 (adapter Channel 3): Then press the remote's third button, LED offs after flashes 4 times, This time means that it had learned the value of the third button
Step 5 (Adaptation Channel 4): Then press the remote control's fourth button, LED lights after flashes 4 times, This time means that it had learned the value of the fourth button.
NOTE: The process must be completed within 15 seconds
 
Adaptation Video,Click here!
 
5. Wiring Diagram :
Control LED indicator: see "RF11A04_LED demo"
Control 12V Relay: See "RF11A04_4Relay demo"
Click here for more help!
 
 
 
Connect with ardiuno :
 
 
 
 
Transmitter :
 
Features / Specifications :
1. 4 buttons;
2. High stability, SMT chip, frequency stabilization SAW, ultra-high-frequency transistor;
3: Large power;
 
Technical Data :
Transmitter Module No.: TB420;
Power supply : 12V 23A battery (not included )  ,
 
Operating current: 28-33mA;
Oscillation mode: SAW resonator;
Modulation mode:ASK/OOK;
Operating frequency:433.92MHZ ;
Encoding format:  EV1527  fixed code ; 
Transmit power : 200mW ;

Product Name: Nuvoton C51 MCU Development Board N76E003 MS51FB9AE LED Infrared Remote Control Optocoupler RS485 Relay Module
Packing included:
1 PCS MS51FB9AE Development board Board
1 PCS SP485 USB to RS485 Converter
1 PCS TB441 Infrared remote control
MS51FB9AE(Compatible with N76E003) Development board​:
1 Operating Voltage : DC 12V
2 Operating Current : 9-13MA
3 IR remote control Working distance: 8-16 meters (receiver sensitivity ≥0.5mW / m2)
4 Major equipment: 4Relay ,1LED Display
5 Size: 80 x 65 x 138mm
6 Weight : 76.7g
The development board adopts MS51FB9AE(Compatible with N76E003) chip produced by Nuvoton Technology as the main control, with optocoupler, relay, digital tube, LED light, button, RS485 and Infrared receiver as peripherals, and provides a program download interface, users can control all peripherals through the main control. The development board uses 12V DC power supply.
The description of TB441 Infrared remote control:
Transmission / coding: NEC coding
IRED: Infrared
Wavelength: 950nm
Power supply: DC 3V
Working voltage: 2.2-3.4V
Working current: ≥10mA
Static current: ≥1uA
Transmit power: 90 mW / sr typ.
Working distance: 8-15 meters (receiver sensitivity ≥0.5mW / m2)
Frequency: 38 kHz
Battery: CR2025(Not included)
Operating temperature: 55 ~ -45 or specific specifications
Storage temperature: -25 ~ 55 or specific specifications
Size : 85 x 40 x 7mm
Weight : 11g
The description of SP485 USB to RS485 Converter:
This is Industrial grade USB TO RS485 Converter
The USB driver IC is CH340E, stable performance, fully compatible with USB1.1,USB2.0,USB3.0 , baud rate up to 256 kbps;
The RS485 bus IC is SP485,this is Industrial grade RS485 conversion IC
USB to RS485 serial port, 4 pin pin assignment as below : 5V GND A B-
Uses : CH340 replace FT232 CP2102 PL2303 for PLC PTZ RS485 MCU etc. RS485 Bus Device
Size : 36 x 16 x 12mm
Weight : 8g
Supports the following Windows OSes:
Windows 98SE
Windows ME
Windows 2000 SP4
Windows XP SP2 and above (32 & 64 bit)
Windows Server 2003 (32 & 64 bit)
Windows Server 2008 / 2008 R2 (32 & 64 bit)
Windows Vista (32 & 64 bit)
Windows 7 (32 & 64 bit)
Windows 8
Windows 8.1
Windows 10
Linux OS
​MAC OS

 
 
 
Typical applications:
DC 12V LED Light 
Remote control switch
Smart Home / Home Automation
Fluorescent lamp
DC 12 DC Motor,RS360
 
 
Wiring Diagram 1:
 
 
 
 
Wiring Diagram 2:
 
Product Name : 2 key Keyfob 2pcs one Channel Wireless Relay switch DC 12V 433M for home motor led
 
Packing list:
2 PCS DC 12V 433M RF 2 Channel Relay  Receiver
1 PCS  433M   Large Power 2 Button SC 2262 Remote Control (USE 12V 27A battery,Batteries not included)
 
 
 
 
 
Technical indicators:
operating voltage : DC 12V;
Operating frequency : 433.92MHz ;
Receiver sensitivity :-95dB;
Encoding: Receiver Recording;
Momentary / Latch / Toggle selectable (defult is  Momentary  , Latch Mode need 2 buttons handsender );
Learning function (can works with EV1527 and PT2262 remote, can store 16 pcs different code remote );
PCB Size:41×20×15mm;
Max load : 500W;
Normally, we would adapter remote control and receiver.
If the item you received has not been adapted Or you need to add accessories, Please follow the instructions below
Learning method and steps:
1 Clear the deposit information : Keep Pressing Learning Key,LED turns on , Wait 8-10 Seconds , LED turn off , that deposited information has been successfully cleared
 
2 Press the learning button and LED on the receiver will light up, enter the learning state.
 
3 Press the key you want to learn on remote control within 2-5 seconds , LED flash 3 times and then turn off , then it have success in learning .
Relay mode :
Normally close (NC ) ;
Normally open (NO ) ;
Normally-open (NO) contacts connect the circuit when the relay is activated; the circuit is disconnected when the relay is inactive. It is also called a Form A contact or "make" contact. NO contacts may also be distinguished as "early-make" or NOEM, which means that the contacts close before the button or switch is fully engaged.
Normally-closed (NC) contacts disconnect the circuit when the relay is activated; the circuit is connected when the relay is inactive. It is also called a Form B contact or "break" contact. NC contacts may also be distinguished as "late-break" or NCLB, which means that the contacts stay closed until the button or switch is fully disengaged.
Work mode (programmable ):
singnal Non-locking (Momentary    is defult )
singnal Self-locking (Toggle  )
singnal Inter-locking (Latch)
Work Mode can be adjustable by jumper,Please operation under power off
 
Work mode explanation:
Momentary------------Press the Transmitter button A, the receiver relay A is ON, release button A; the receiver relay A is OFF, the same as B/C/D ,Every channel is Independent ;
 
Toggle---------------Press transmitter button A for 1 time , the receiver relay A is ON, press button A again, the receiver relay A is OFF, the same as B/C/D. Every channel is Independent ;
  
Latched------------------
Press transmitter button A, the receiver relay A is ON, the relay B/C/D is OFF.
Press transmitter button B, the receiver relay B is ON, the relay A/C/D is OFF.
Press transmitter button C, the receiver relay C is ON, the relay A/B/D is OFF
Press transmitter button D, the receiver relay D is ON, the relay A/B/C is OFF.
 
433M 2 Button EV1527 Remote Control:
 
Power supply : 12V 27A battery  replacable .(This remote doesnot have a battery , Please buy in your local market )
Operating current:  ≤ 12mA ;
Oscillation mode:  SAW resonator ;
Oscillation resistor : 330K
Modulation mode: ASK OOK ;
Operating frequency: 433.92MHz  ;
Frequency dev iation: ±0.2MHz ;
Encoding format: Million  Group Code (  EV1527 ) ;
Transmit power: 10 mW.
Data Rate : 50~60KHZ;
  
 
 
 

Work mode
   
 
 
Typical applications:
DC 5V Home lighting system 
Garage Door
Elevators
Motor reversing control
Remote control switch
Smart Home / Home Automation
LED lighting
Fluorescent lamp
DC 5 DC Motor,RS360
 
 
Wiring Diagram 1:
DC 5V control circuit,Wiring diagram below. "LOAD" may be LED lights, fans, motors and other DC 5V
 
 
 
 
Wiring Diagram 2:
DC 1-48V OR AC 85-265V control circuit,Wiring diagram below(Note:If not DC 5V load, need another DC 5V power supply). "LOAD" may be LED lights, fans, motors and other DC AC equipment
 
  
Product Name : DC 5V 433mHz 2 Channel Wireless Delay Relay Remote Controller 
 
Packing list:
1 PCS 433M DC 5V 2 Channel Multifunction Wireless Controller 
2 PCS  433M    2 Button EV1527  Remote Control (USE 12V 27A battery,Batteries not included)
 
 
 
Technical indicators:
Operating voltage : DC 5V 
Operating Current : All relays close,about 15MA; one relay open,about 86MA;two relay  open,about 157MA
Operating frequency : 433.92M; 
Receiver sensitivity  : -108dB;
Work mode       : Non-locking (Momentary is defult),Self-locking (Toggle),Inter-locking (Latch),  Delay;Each channel independently set the Work mode; 500,000 seconds maximum delay
 
Size(Including housing)  : 75*54*28mm
Learning function (can works with EV1527 and PT2262 remote, can store 16 pcs different code remote );
Max load : 500W;
  
Normally, we would adapter remote control and receiver.
If the item you received has not been adapted Or you need to add accessories, Please follow the instructions below
Learning method and steps:
Under normal operating mode, LED will be lit, when receives a valid remote control (EV1527 / PT2262) button values, LED flashes
   
Clean code: press the button and held down, LED off, LED will light about 8 seconds later, clean code is completed (Note: After performing clean code previously stored remote control value does not exist)
     
Step 1 (into the learning mode): Press the button (about 1 second), LED off;
Step 2 (adapter channel 1): Then press the first button on the remote control, LED flashes four times off, then learning the first button value
Step 3 (Adaptation Channel 2): Then press the second button on the remote control, LED flashes four times brighter, then learned two key values
 
Use more details, please click here!
 
 
 
433M 2 Button EV1527 Remote Control:
 
Power supply : 12V 27A battery  replacable .(This remote doesnot have a battery , Please buy in your local market )
Operating current:  ≤ 12mA ;
Oscillation mode:  SAW resonator ;
Oscillation resistor : 330K
Modulation mode: ASK OOK ;
Operating frequency: 433.92MHz  ;
Frequency dev iation: ±0.2MHz ;
Encoding format: Million  Group Code (  EV1527 ) ;
Transmit power: 10 mW.
Data Rate : 50~60KHZ;
  
 
 
 

  
 
 
 
 
 
 
Product Name: DC 5-24V 4ch Bluetooth V4.0 BLE Relay RF Wireless Switch for Apple IOS Android phone Smart home LED Motro
 
 
 
 
 
 
 
Package inlcuded:
 
1 pcs DC 5-24V 4-Channels Bluetooth BLE 4.0 Relay Module
 
 
 
 
 
 
Description:
 
 
1 Operating voltage: power supply 1,DC 6.5-25V; power supply 2,DC 5V.
 
2 Operating Current: Standby current (all relays closed) 13MA, 1 relay open 44MA, 2 relays open 76MA,3 relays open 107MA, 4 relays open 139MA.
 
3 Bluetooth protocol: Bluetooth Specification V4.0 BLE.
 
4 Based on TI CC2541 chipset, Support android 4.3 or above,phone 4s or above (IOS8 or above) mobile control
 
5 2.4GHz-2.48GHz unlicensed ISM band.
 
6 send commands via Android/IOS Bluetooth APP control relay turned on and off (we provide Bluetooth APP, you can also use your own APP to control relays, sending commands to control). It can also be triggered by an external pulse signal.
 
7 ''Momentary'' ''Self-locking'' ''Interlock'' ''open'' ''close'' ''Delay1(Second)'',''Delay2(0.1Second)'' 7 Commands
 
8 External trigger input, opto-isolated switch, low pulse inputs.
 
9 size 80*66*19mm
 
10 Weight : 75g
 
 
NOTE:
 
1 phone must support bluetooth 4.0, such as galaxy S4 (android 4.3),phone 4s(IOS8)
 
 
 
2 Bluetooth 4.0 without matching, so when open bluetooth mobile phone cannot search equipment
 
 
 
3 Without password, open software direct connection
 
 
 
4 Baud rate is 9600BPS, Please do not modify the Bluetooth baud rate, otherwise the relay will not work
 
 
APP:
 
 
Android : Installing ''BluetoothLeGatt'' APP
 
IOS : In AppStore download ''LightBlue'' software
 
 
For more information, please contact me
 
 
 
 
 
 
 
Typical applications:
 
 
 
Home lighting system
Remote control switch
Remote locking
Garage door remote control
Smart Home / Home Automation
DC 5-24V LED lighting
Fluorescent lamp
DC 5-24V DC Motor
Fluorescent lamp
Automotive electronics
Industrial automation and control
PTC Camera
Air conditioning / fan remote control
 
 
 
 
 
1 DC 6-25V control circuit,Wiring diagram below. ''LOAD'' may be LED lights, fans, motors and  other DC 6-25V equipment
 
 
 
2 DC 5V control circuit,Wiring diagram below. ''LOAD'' may be LED lights, fans, toy car and other DC 5V equipment
 
 
3 DC 1-100V OR AC 85-265V control circuit,Wiring diagram below. ''LOAD'' may be LED lights, fans, motors and other DC AC equipment
 
 
 
 
 
4 All kinds of motor reversing control: DC 1-100V or AC 85-265V DC/AC Motor
 
 

433MHz  1 Transmitter module & 4 Wireless Relay Controller for Arduiuo UNO MEGA2560
 
We provide Arduiuo sample code , please contact after your order after your purchase  . 
 
 
 
Qty:
 
1 PCS 433M Wireless transmitter module( Does not include Arduiuo UNO );
4 PCS 433M  1 channels relay switch;
 
 
Wireless transmitter module  connected with  Arduiuo uno( replace PT2262 Remote Keyfob)
 
USE: 
 
 
 
Software control:
How to use:send "a" trigger A channel relay,send "b" trigger A channel relay,Etc.
 
 
arduiuo core fragment( complete code please Request) :
  
//Author: Mr Liu
//Arduiuo 1.0
//Arduiuo uno R3
//Making a wireless remote control with arduiuo
  
...
 
//send:8 Address Bits, 4 Data Bits, Sync bit
void send_data()
 
void setup() {
  // initialize the LED pin as an output:
  pinMode(ledPin, OUTPUT); 
   // initialize the encoder DOUT pin as an output
  pinMode(data_out, OUTPUT);
 
  Serial.begin(9600);
}
void loop()
{
  ...
  
  while(1)
  {
    //get key from pc serial port
    while (Serial.available() > 0) 
    {
        keydata = Serial.read();
        receive_flag = 1;
        delay(2);
    }
   
    if(receive_flag == 1)//if get key,send key
    {
     
    receive_flag = 0;
   
    if((keydata == 'a') || (keydata == 'A'))//trigger A channel relay.
    {
      Temporary[2] = 0xC0;// 0xC0 is A button key
      digitalWrite(ledPin, HIGH);//Turn on led
      send_data();//send code word
       Serial.println(".....trigger A channel relay.....");
    }
    else if((keydata == 'b') || (keydata == 'B'))//trigger B channel relay.
    {
      Temporary[2] = 0x30;// 0x30 is B button key
      digitalWrite(ledPin, HIGH);//Turn on led
      send_data();//send code word
      Serial.println(".....trigger B channel relay.....");
    }
     else if((keydata == 'c') || (keydata == 'C'))//trigger C channel relay.
     {
      Temporary[2] = 0x0C;// 0x0C is C button key
      digitalWrite(ledPin, HIGH);//Turn on led
      send_data();//send code word
      Serial.println(".....trigger C channel relay.....");
     
     }
     else if((keydata == 'd') || (keydata == 'D'))//trigger D channel relay.
     {
      Temporary[2] = 0x03;// 0x03 is D button key
      digitalWrite(ledPin, HIGH);//Turn on led
      send_data();//send code word
      Serial.println(".....trigger D channel relay.....");
     }
    
    ...
  
  }
}

 
Product Name:
DC 6.5-30V 16ch IN & 16 ch Out Port DIN35 C45 Rail Box RS485 Modbus RTU Module for PLC Relay Switch LED Motor
 
 
 
Package inlcuded:
  1PCS DC 12V 24V 16Ch Input & 16CH Output RS485 Modbus Rtu Module
 
 
Description:
 
1: Working voltage: DC 6.5-30V (7.5V 9V 12V 15V 24V)
2: Working current: 8-50MA
3: 16 channels photoelectric isolation Input ports (NPN low level active )
4: 16 channels Darlington output (ULN2803 NPN output)
5: ''open'' ''close'' ''Momentary'' ''Self-locking'' ''Interlock'' ''Delay'' 6 Commands
6: 16 inputs can remotely control 16 outputs of another board via RS485 bus (relevant registers must be set)
7: MODBUS RTU command, Support 03 06 function code(Some registers support 16 function codes)
8: Under the ''Delay'' command ,the maximum delay is 255 seconds;
9 MODBUS commands can be made serial HyperTerminal (serial assistant) OR ''Modbus Poll'' Enter;
10 Under the MODBUS command mode, it can support up to 64 devices in parallel
11 The default baud rate is 9600BPS. The baud rate can be selected through jumpers: 2400 4800 9600 19200BPS
12 Size: 100 * 72 * 20mm(Only PCB Board);120 * 88* 42mm(with Din Rail Box)
13 Weight: 64g(Only PCB Board);143g(with Din Rail Box)
14 Maximum load: the maximum load current of each channel is 300MA
For more information, please contact me
DIN rail Box parameters:
Product model: UM72
Color: green
Width: suitable for PCB board width UM72(72mm)
Insulation grade: flame-retardant VO grade
Backplane length: suitable for 100 mm PCB boards
Net weight: 72g
Installation: DIN35 and C45 rail
 
 
 
Application
 
PLC IO expansion board
Smart Home,Home Automation ,Wiser Home;
PTC Camera
Security Monitoring
Identification system;
IP Camera
LED Lamp Drivers
Automatic curtain control
 
Application 1: Control 16-channel switch output through RS485 bus
Application 2: Read 16-channel switch input via RS485 bus
Application 3: 16-channel input remote control 16-channel output
 
 

 
Product Name:
DC 6.5-30V 16ch IN & 16 ch Out Port DIN35 C45 Rail Box RS485 Modbus RTU Module for PLC Relay Switch LED Motor
 
 
 
Package inlcuded:
  1PCS DC 12V 24V 16Ch Input & 16CH Output RS485 Modbus Rtu Module
 
 
Description:
 
1: Working voltage: DC 6.5-30V (7.5V 9V 12V 15V 24V)
2: Working current: 8-50MA
3: 16 channels photoelectric isolation Input ports (NPN low level active )
4: 16 channels Darlington output (ULN2803 NPN output)
5: ''open'' ''close'' ''Momentary'' ''Self-locking'' ''Interlock'' ''Delay'' 6 Commands
6: 16 inputs can remotely control 16 outputs of another board via RS485 bus (relevant registers must be set)
7: MODBUS RTU command, Support 03 06 function code(Some registers support 16 function codes)
8: Under the ''Delay'' command ,the maximum delay is 255 seconds;
9 MODBUS commands can be made serial HyperTerminal (serial assistant) OR ''Modbus Poll'' Enter;
10 Under the MODBUS command mode, it can support up to 64 devices in parallel
11 The default baud rate is 9600BPS. The baud rate can be selected through jumpers: 2400 4800 9600 19200BPS
12 Size: 100 * 72 * 20mm(Only PCB Board);120 * 88* 42mm(with Din Rail Box)
13 Weight: 64g(Only PCB Board);143g(with Din Rail Box)
14 Maximum load: the maximum load current of each channel is 300MA
For more information, please contact me
DIN rail Box parameters:
Product model: UM72
Color: green
Width: suitable for PCB board width UM72(72mm)
Insulation grade: flame-retardant VO grade
Backplane length: suitable for 100 mm PCB boards
Net weight: 72g
Installation: DIN35 and C45 rail
 
 
 
Application
 
PLC IO expansion board
Smart Home,Home Automation ,Wiser Home;
PTC Camera
Security Monitoring
Identification system;
IP Camera
LED Lamp Drivers
Automatic curtain control
 
Application 1: Control 16-channel switch output through RS485 bus
Application 2: Read 16-channel switch input via RS485 bus
Application 3: 16-channel input remote control 16-channel output
 
 

Below item is powered by Canton-Power Ltd . 
 
Product Name:   5pcs 12W 2-12V 5V to 12V DC-DC Step-up Converter Boost Module Power Supply Board for Smart home PLC RS485 BUS
  
Packing list:
 
5 PCS 12W DD2424SA_12V 2V-12V TO 12V DC DC Step-up Converter Module
  
Description:
Input voltage DC 2 ~ 12V,output DC 12V±4% (No-load voltage is 12-12.4V)
 
Internal 4A Switch Current Limit.
 
DC DC Boost Converter Module working frequency 1.2MHZ.
 
up to 96% Efficiency (usually is 70% -94% )
 
Operating temperature range : -40~ 85 Degrees Celsius
 
Storage temperature range : -65~ 150 Degrees Celsius
 
2.54mm pin pitch,for MCU Development Board Breadboard friendly.
 
Size : 22mm x 15.2mm x 6.2mm
 
Weight : 2g
 
 
 
Applications
Battery powered equipment
Small power motors
IP Camera, Video camera,PTZ
Wifi Ethernet router
RS485 Modbus PLC
Toy car boat
Model aircraft
power bank
LED Lighting
315M 433M Wireless Relay
Wireless communication equipment
Multimeter Instrumentation
 
 
Attention :
 
This is a DC-DC voltage converter module,Must be noted when using:
1 Input voltage can not be greater than the maximum input range
2 Output power can not be greater than the maximum load for a long time
3 Input power must be greater than the output power, because the power consumption of the module itself
  
Q & A:
     
Q : Why output voltage is less than the nominal voltage
A : Input power supply power is too low.Test the input voltage with a multimeter,a t this time of the input voltage is very low
 
 
 
   
 
 
 
 

Typical applications:
Automotive electronics
Audio and video equipment
Voltage polarity reversal
Motor,Toy car, boat, model aircraft
Emergency lighting
 
Product Name : 4pcs mini & Ultra-light DPDT Relay Board for Motor reversing Polarity reversal HK19F DC5V PCB Module
 
Packing list:
    
4 PCS DR21B01 one Channel DC 5V DPDT Relay Module
  
 
 
Description:
  
DR21B01 5VDC one Channel DPDT Relay Board
 
Operating Voltage : DC 4.5-5.5V(5V)
Operating Current(Relay ON): 36MA
Standby Current(Relay OFF) : <1MA
 
Input control signal voltage: 
                     0V - 0.6V Low stage (relay is OFF),
                     0.6V – 2.5V (unknown state).
                     2.5V - 24V High state (relay is ON).
Input control signal high state current:
                     2.5V: 0.15mA
                     5V: 0.4mA
                     12V: 1.2mA
                     20V: 2mA
 
Relay Load : 1A 125VAC;2A 30VDC
 
 
Size   : 22.86x18x14
Weight :6g
 
 
 
Schematic:
 
 
 
   

Product Name: Provide uno mega2560 code 64x32 dot Matrix LED for diy Sign Light Neon Bright UNO MCU 
 
Module No.:  TB333
 
With the display you get full documentantion and example sketch by email! Packing list does not include Arduiuo UNO!  
 
Packing list(Does not include Arduiuo UNO) :
 
1 PCS  64 x32 Red  Pixel  Matrix LED
1 PCS UNO/MEGA2560 adapter board
1 pcs adapter cable
 
 
Description :
  
F3.75 Single Color 64 X 32 matrix displays
Red pixels
Driver IC : 74HC245 74HC595 74HC138 74HC04 APM4953
Can display variety of patterns and characters
Provided arduino code(Include Two types of code:UNO & MEGA2560)
 
Best viewing distance: >=5M
Dot matrix size: 3.75MM
Dot matrix spacing:4.75MM
Size: 304MM x 152MM
Weight: About 430g
  
 
Use: 
 
 
USE for Arduiuo UNO R3: 
 
 
 
You can use this software,m ake your favorite patterns:
 
Display effect:
 
   
 

Below item is powered by Canton-Power Ltd . 
 
Product Name:   5pcs 2 in 1 input 2-24V output 5V DC-DC Step-up & Step-down Converter Power Supply Module for Solar charger mobile power
  
Packing list:
 
5 PCS 8W  DD2412SA_5V 2-24V TO 5V DC DC  Step-up & Step-down Converter Module
 
  
Description:
Input voltage DC 2-24V, output DC 5V±5%  (No-load voltage is 5-5.4V)
 
2 in 1 DC DC Boost-Buck Converter Module working frequency 1.2MHZ.efficiency 70% -90% .
 
Operating temperature range : -35~ 85 Degrees Celsius
 
Storage temperature range : -65~ 150 Degrees Celsius
 
2.54mm pin pitch,for MCU Development Board Breadboard friendly.
 
Size : 21.4mm x 15.6mm x 5.8mm(Very small)
 
Weight : 2.2g(Very light) 
  
 
 
   
Applications
Battery powered equipment
Breadboard Power Supply
ARM STM32 AVR PIC FPGA CPLD Board
UNO Pro mini Nano DUE AVR STM32 
Small power motors
Camera, Video camera
Toy car
power bank 
Phone PDA
LED Lighting
Wireless communication equipment
Audio equipment
 
 
Attention :
 
This is a DC-DC voltage converter module,Must be noted when using:
1 Input voltage can not be greater than the maximum input range
2 Output power can not be greater than the maximum load for a long time
3 Input power must be greater than the output power, because the power consumption of the module itself
  
Q & A:
     
Q : Why output voltage is less than the nominal voltage
A : Input power supply power is too low.Test the input voltage with a multimeter,a t this time of the input voltage is very low
 
 
 
   
 
 
 
 

 
Product Name: CE-IO22A02 DC 12V 2CH Multi-function Delay Relay Timer Time Switch PLC LED
 
 
Package inlcuded:
 
1 PCS DC 12V 2 channel multi-function delay relay board
 
 
Product Features:
    
Longest delay time : 00h:00m:01s - 99h:59m:59s
  
4 channel relay,each channel independently triggered independent delay, do not interfere with each other.
   
6 kinds of functional modules, each functional module has three sub-modes (no cycle, 2-99 cycle, always cycle).
 
Input optical isolation.
  
Power anti-reverse diode.
 
High Q value SMD electrolytic capacitors.
 
Product Specifications:
  
1 Operating voltage: DC 12V
 
2   Operating Current(Digital tube off): Standby current (all relays closed) 8MA, 1 relay open 41MA, 2 relays open 75MA,
    Operating Current(Digital tube on): Standby current (all relays closed) 26MA, 1 relay open 59MA, 2 relays open 93MA 
 
3 Size: 70x50x20 
4 Weight : 40g
5 Relay maximum load capacity: DC 1-100V/6A; AC 85-265V/5A
  
   
Typical applications:
1 DC 12V control circuit,Wiring diagram below. "LOAD" may be LED lights, fans, motors and
other DC12V equipment
 
 
 
2 DC 1-100V OR AC 85-265V control circuit,Wiring diagram below. "LOAD" may be LED lights, fans, motors and other DC AC equipment
 
 
 
 
 
 
User Instructions:
 
Short press: press key time is less than 2 seconds;
   
Long press: press key time more than 2 seconds;
   
Status: working status , set status, power-saving status.
    
working status : start work after powering. Displays the remaining time of 1 channel, the parameters can be displayed the "channel select" to set;
     
Set status: short press the "SET" key to enter "channel select" Status. Short press "OK" button to exit the setting;
  
power-saving status: in this Status,digital tubes donot display,and other features work correctly. Long press "OK" button after 5 seconds to enter power-saving status, press again "OK" button for 5 seconds or re-power to exit power-saving status.
   
Factory settings: press and hold " " and "--" two button for 3 seconds, to restore factory settings, and the digital tube will turn open . After re-power , will run default parameters.
   
Settings:
1.After power , the remaining time of digital display channel (default channel 1).
    
2.Press "SET" button to enter "channel select" interface. In the "channel select" screen, then press " "/"-" button to select channel to operate (relay). Press "OK" button will exit "channel select" screen, and save the current parameters. Press "SET" button into "parameter settings" interface.
    
3. under "parameters" screen press "SET" button you can switch parameters. " "/"-" Button to modify the parameters. Press the "OK" button to exit the "parameters" screen, and save the current parameters.
  
"channel select" interface:
  
"parameter settings" interface: 
 
Timer T1 T2 time minimum unit is second, so the timing range of T1 T2 is 99 hours 59 minutes 59 seconds.
   
The number of cycles(Nx) is the number of cycles to perform an action triggered once(Nx = 00 indicates always cycle, Nx = 01 means no cycle).So you can set Number of cycles is: 1-99 times or always cycle.
 
 
Noun resolved:
  
NO              : Relay normally open contact
COM           : Relay common contact
NC              : Relay normally closed contact
Relay open : COM connect NO.
Relay close : COM disconnect NO. .
  
Function Mode:
  
The following Function Modes can be set to cycle mode operation.You can set Number of cycles (Nx 1~99 times,00 is always cycle, the default is 01 not cycle).
   
F0: After power-up, the relay close . Trigger input (IN1/2/3/4), relay open . T1 time delay  close .
  
F1: After power-up, the relay  open . Trigger input , relay  close . T1 time delay  open .
  
F2: After power-up, the relay  close . Trigger input , delay time T1 and relay  open . T2 time delay relay  close .
  
F3: After power-up, the relay  open .Trigger input , delay time T1 and relay  close . T2 time delay relay  open .
  
F4: After power-up, the relay  close . After the delay time T1 and relay  open . T2 time delay relay  close .
  
F5: After power-up,the relay  open . After the delay time T1 and relay  close . T2 time delay relay  open .
 
 
 
 
 
 
 
 
 
 
 

 
 
Typical applications:
  
Remote control switch
Smart Home / Home Automation
LED lighting
3d printer
Fluorescent lamp
220V AC Motor(<500W)
 
 
 
Product Name : 1pcs 433M EV1527 Wireless Remote Control 2pcs 220V 1 Channel Relay RF Receiver
 
Packing list:
2 PCS 433M 220V 1 Channel  Relay Receiver
1 PCS 433M 2 Button Remote Control
 
 
Technical indicators:
 
operating voltage : AC 220V;
Operating frequency : 433.92MHz ;
Receiver sensitivity :-95dB;
Encoding: Receiver Recording;
Momentary / Latch / Toggle selectable (defult is  Toggle  , Latch Mode need 2 buttons handsender );
Output mode : Relay switch;
Receiver size: 62 * 35 * 22 mm;
Max load : 500W;
 
Advantage :
1: Receiver Mother board have a learning key , if the remote is lost , must buy EV1527 OR Pt2262 remotes to re-learn;
 
Work mode (programmable )
singnal Inter-locking (Latch)
singnal Self-locking (Toggle   is defult )
singnal Non-locking (Momentary)
 
Work mode explanation:
Momentary------------Press the Transmitter button A, the receiver relay A is ON, release button A; the receiver relay A is OFF, the same as B/ ,Every channel is Independent ;
 
Toggle---------------Press transmitter button A for 1 time , the receiver relay A is ON, press button A again, the receiver relay A is OFF, the same as B/. Every channel is Independent ;
  
Latched------------------
Press transmitter button A, the receiver relay A is ON, the relay B is OFF.
Press transmitter button B, the receiver relay B is ON, the relay A is OFF.
  
Normally, we would adapter remote control and receiver.
If the item you received has not been adapted Or you need to add accessories, Please follow the instructions below
 
Program steps :
1: keep pressing learning key on the receiver controller ,
LED turn on after 2 second , then turn off after 4 second, then the receiver controller enter programming state , but not release the finger , still keep pressing the learning button , 
LED blink once after 2 second , release the finger on learing key , it is Momentary mode , 
or still keep pressing learing key ,
LED blink twice after 2 second , release the finger on learing key , it is Toggle mode ,
or still keep pressing learing key ,
LED blink 3 times after 2 second , release the finger on learing key , it is Latch mode ,
 
Learning method and steps
Keep pressing learnig key on receiver controller board , LED turn on after 2 seconds , release the finger on learning key , press the key on remote , work state LED blink 3 times , it means learnig successfully ;
Clear the deposit information
Keep pressing learnig key on receiver controller board, LED turn on after 2 seconds , then turn off after 4 seconds , it means clearing successfully .
 
 
433M 2 Button EV1527 Remote Control:
Technical Data :
 
Power supply : 12V 27A battery  replacable .(This remote doesnot have a battery , Please buy in your local market )
Operating current:  ≤ 12mA ;
Oscillation mode:  SAW resonator ;
Oscillation resistor : 330K
Modulation mode: ASK ;
Operating frequency: 433.92MHz  ;
Frequency dev iation: ±0.2MHz ;
Encoding format: Million  Group Code (  EV1527 ) ;
Transmit power: 10 mW.
Data Rate : 50~60KHZ;

Typical applications:
Automotive electronics
Audio and video equipment
lithium battery 18650
Motor,Toy car, boat, model aircraft
Emergency lighting
 
   
  
Product Name :4PCS DC 12V 1CH DPDT Signal Relay Module Board HK19F PCB Board for LED Motor Audio equipment Level polarity inversion
 
Packing list:
    
4 PCS DR21D01 one Channel DC 12V DPDT Relay Module
  
 
 
Description:
  
DR21D01 12VDC one Channel DPDT Relay Board
 
Operating Voltage : DC 12V
Operating Current(Relay ON): 16MA
Standby Current(Relay OFF) : <1MA
 
Input control signal voltage: 
                     0V - 0.6V Low stage (relay is OFF),
                     0.6V – 2.5V (unknown state).
                     2.5V - 24V High state (relay is ON).
Input control signal high state current:
                     2.5V: 0.15mA
                     5V: 0.4mA
                     12V: 1.2mA
                     20V: 2mA
 
Relay Load : 1A 125VAC;2A 30VDC
 
 
Size   : 22.86x18x14
Weight :6g
 
 
 
Schematic:
 
 
 
   

Product Name: DC 12V 4 Channel 38KHz Infrared IR Remote Control Relay Switch Module Toggle Controller for LED Motor Lamp Smart Home replace RF RC 433M
 
 
Packing list:
 
1 PCS 4 channel Self-locking (Toggle) IR Receiver Controller;
2 PCS 5 button Infrared Remote Controller(Use CR2025 batteries ,NOTE : Batteries not included); 
 
Description:
 
4 channel Self-locking (Toggle) IR Receiver Controller:
 
Operating voltage: DC 12V (voltage range :9-13V)
Press "CH1" button,Relay "NO1" connected "COM1", Press again "NO1" and "COM1" Disconnect
 
Press "CH2" button,Relay "NO2" connected "COM2", Press again "NO2" and "COM2" Disconnect
 
Press "CH3" button,Relay "NO3" connected "COM3", Press again "NO3" and "COM3" Disconnect
 
Press "CH4" button,Relay "NO4" connected "COM4", Press again "NO4" and "COM4" Disconnect 
 
Press "POWER" button, 4 Relay Simultaneously open,Press again 4 Relay Simultaneously close 
Size : 65*45*20(MM)
 
Note : This IR receiver can only fit we offer IR remote control,the other IR remote control can not control this IR receiver
 
5 button Infrared Remote Controller:
Encoding IC : UPD6122
Frequency : 38K
Battery powered : CR2025(NOTE : Batteries not included)
Size : 86*40*6(MM)

Below item is powered by Canton-Power Ltd . 
 
Product Name:   5pcs 7W 2 in 1 Step-UP & Step-Down 3V 3.7V 5V 9V 15V 18V TO 12V DC-DC Converter Regulator Module for PTZ IP camera
  
Packing list:
 
 5PCS DD2412SA_12V 2-24V TO 12V DC DC Step-UP & Step-Down Converter Module
  
Description:
Input voltage DC 2-24V, output DC 12V±4%  (No-load voltage is 12-12.4V)
 
2 in 1 DC DC Boost-Buck Converter Module working frequency 1.2MHZ.efficiency 67% -89% .
 
Operating temperature range : -35~ 85 Degrees Celsius
 
Storage temperature range : -65~ 150 Degrees Celsius
 
2.54mm pin pitch,MCU Development Board Breadboard friendly.
 
Size : 21.4mm x 15.6mm x 5.8mm(Very small)
 
Weight : 2.2g(Very light) 
  
 
  
Applications
Battery powered equipment
Breadboard Power Supply
electrical tools
Small power motors
Camera, Video camera
PLC RS485 Modbus  Module
Toy car
 Wifi Router
IP camera
LED Lighting
Wireless communication equipment
Instruments multimeter
Smart Home
 
 
Attention :
 
This is a DC-DC voltage converter module,Must be noted when using:
1 Input voltage can not be greater than the maximum input range
2 Output power can not be greater than the maximum load for a long time
3 Input power must be greater than the output power, because the power consumption of the module itself
  
Q & A:
     
Q : Why output voltage is less than the nominal voltage
A : Input power supply power is too low.Test the input voltage with a multimeter,a t this time of the input voltage is very low
 
 
 
 
   
 
 
 
 

Typical applications:
ARDUIUO UNO MEGA2560 Pro mini DUE
breadboard PCB Universal board
raspberry pi ARM AVR PIC
DC 5V 9V 12V Home lighting system 
Smart Home / Home Automation
LED lighting
12V DC Motor,RS360
 5V DC Motor
 
There are a variety of installation,can for breadboard ,PCB, Universal board,UNO MEGA2560 raspberry pi
 
 
Wiring Diagram 1:
 5.5-12V DC operating voltage DC 5.5-12V devices
 
 
Wiring Diagram 2:
5.5-12V DC operating voltage ,DC 1-48V OR AC 85-265V devices
 
  
Wiring Diagram 3:
3 5V DC operating voltage ,DC 5 V devices
Wiring Diagram 4:
4 5V DC operating voltage ,DC 1-48V OR AC 85-265V devices
 
 
 
 
 
Product Name : DC 5V 12V 433M RC RF 4ch Wireless Decoder Relay board with 2x EV1527 Remote control for Arduiuo MEGA2560 raspberry pi breadboard
 
Packing list:
1 PCS MINI 433M DC 5V 9V 12V 4 Channel Wireless Controller 
2 PCS  433M 4 Button EV1527 Remote Control( USE 12V 27A battery,Batteries not included )
1 PCS Plastic shell
1 PCS 2.54MM straight pin
1 PCS 2.54MM curved pin
 

 
Features:
 
1 Operating voltage: Power 1: DC  5V , 9V, 12V (range 5 -15V) ; Power 2: DC 4.2-5V
 
2 Operating current: Standby Current(12V 8MA, 5V 8MA); each relay operating current 40MA
 
3 Wireless frequency: 433M(315M version can be customized)
 
4 Receiver sensitivity: -108dBm
 
5 Decode: learning code, can be adapted EV1527 / PT2262 and compatible remote control, you can store up to 6 remote control
 
6 work mode: Non-locking (Momentary is defult),Self-locking (Toggle),Inter-locking (Latch)
 
7 Relay load voltage: DC 1-48V; AC 85-265V
 
8 Relay load current: <= 2A
 
9 Size: 49mmx25.5mmx14mm (Very small)
 
10 Weight: 16g(Very light)
  
Normally, we would adapter remote control and receiver.
If the item you received has not been adapted Or you need to add accessories, Please follow the instructions below
 
study method:
Clean code: Hold down the learn button down, LED stays on for 4-5 seconds and then turns off
Learning: Hold down the learn button, LED light after release; immediately press the remote control button, LED flashes three times, learning success
 
Use more details, please click here!
 
 
Work mode:
There are three Work modes, Non-locking (Momentary is defult),Self-locking (Toggle),Inter-locking (Latch)
two pads of T1  connected is Inter-locking (Latch) mode,two pads of T2  connected is Self-locking (Toggle),
All disconnect is Non-locking (Momentary is defult)
  
Mode Description:
Momentary : Press the Transmitter button A, the receiver Channel 1 is Open, release button A, the receiver Channel 1 is Close, the same as B ,Every Channel is Independent ;
Toggle     : Press transmitter button A for 1 time , the receiver Channel 1 is Open, press button A again, the receiver Channel 1 is Close, the same as BCD. Every Channel is Independent ;
Latch      : Press transmitter button A, the receiver Channel 1 is Open, the Channel 2/3/4 is Close.Press transmitter button B, the receiver Channel 2 is Open, the Channel 1/3/4 is Close.
 
 
 
 
433M 4 Button EV1527 Remote Control:
 
Power supply : 12V 27A battery  replacable .(This remote doesnot have a battery , Please buy in your local market )
Operating current:  ≤ 12mA ;
Oscillation mode:  SAW resonator ;
Oscillation resistor : 330K
Modulation mode: ASK OOK ;
Operating frequency: 433.92MHz  ;
Frequency dev iation: ±0.2MHz ;
Encoding format: Million  Group Code (  EV1527 ) ;
Transmit power: 10 mW.
Data Rate : 50~60KHZ;
  
 
 
 

 
Product Name: 5A DC 6-24V 8I8O Multifunction Modbus RTU MOSFET Module Support 03 06 16 Function Code RS485 Switch Control Board DIN35 Rail Box
 
 
 
Package inlcuded:
  1PCS DC 9V 12V 15V 24V 8I8O RS485 5A MOSFET Module
 
 
Description:
 
1: Working voltage: DC12V/24V (Range 6-25V)
2: Working current: 8-10MA(12V)
3 8 photoelectric isolation Input ports (NPN low level active ), the input and output relationship can be set to associated (default) and non-associated through commands.
4: 8 photoelectric isolated output ports,''open'' ''close'' ''Momentary'' ''Self-locking'' ''Interlock'' ''Delay'' 6 Commands
5: MODBUS RTU command, Support 03 06 16 function code
6: Under the ''Delay'' command ,the maximum delay is 255 seconds;
7 MODBUS commands can be made serial HyperTerminal (serial assistant) OR ''Modbus Poll'' Enter;
8 Under the MODBUS command mode, it can support up to 64 devices in parallel
9 The default baud rate is 9600BPS. The baud rate can be selected through jumpers: 2400 4800 9600 19200BPS
10 Size: 136 * 72 * 18mm(Only PCB Board);140 * 88* 40mm(with Din Rail Box)
11 Weight:75g(Only PCB Board);175g(with Din Rail Box)
12 MOSFET load: 3.5-5V is 2A; 5-9V is 4A; 9-30V is 5A
For more information, please contact me
The MOSFET model is 20N06, and each output channel is an independent control unit, which does not interfere with each other. If one MOSFET is burnt out and it does not affect the work of other channels, just replace the MOSFET with a new one.
The advantages and disadvantages relative to the relay board:
Advantages: 1 small working current, 8-10MA (12V); 2 no sound when switching states; 3 light weight
Disadvantages: 1 load current is small, within 5A; 2 can only control DC 3.5-30V voltage
V1(V2-V8): Load input positive
GO1 (GO2-GO8): load output negative
G1 (G2-G8): load input negative
Note: The output indicator(CH1/2...8 LEDs) is only valid when there is load power
Application
 
PLC IO expansion board
Smart Home,Home Automation ,Wiser Home;
PTZ CCTV Camera
Security Monitoring
Identification system;
Motor FW & BW
Automatic curtain control
LED lighting system
DIN rail Box parameters:
Product model: UM72
Color: green
Width: suitable for PCB board width UM72(72mm)
Insulation grade: flame-retardant VO grade
Backplane length: suitable for 136 mm PCB boards
Net weight: 99g
Installation: DIN35 and C45 rail
 
 
 
 
 
Typical applications:
 
MODBUS RTU command mode (HEX), you can control a variety of ways: Serial Hyper Terminal Control (need to manually add the CRC), Modbus Poll software control (software automatically add the CRC), PLC or MCU process control
 
 
 
Wiring Diagram:
The power supply is DC 6-25V, the load is DC 3.5-30V circuit, the wiring is as shown in the figure below. The load ''LOAD'' can be high-power relays, LED lights, fans, motors, cameras and other DC 3.5-30V equipment
 
 
 
 
 
 
Test Software(We offer a demo video):
Serial HyperTerminal:
 
Modbus Poll
 
 
 
 

 
Product Name: 5A DC 6-24V 8I8O Multifunction Modbus RTU MOSFET Module Support 03 06 16 Function Code RS485 Switch Control Board DIN35 Rail Box
 
 
 
Package inlcuded:
  1PCS DC 9V 12V 15V 24V 8I8O RS485 5A MOSFET Module
 
 
Description:
 
1: Working voltage: DC12V/24V (Range 6-25V)
2: Working current: 8-10MA(12V)
3 8 photoelectric isolation Input ports (NPN low level active ), the input and output relationship can be set to associated (default) and non-associated through commands.
4: 8 photoelectric isolated output ports,''open'' ''close'' ''Momentary'' ''Self-locking'' ''Interlock'' ''Delay'' 6 Commands
5: MODBUS RTU command, Support 03 06 16 function code
6: Under the ''Delay'' command ,the maximum delay is 255 seconds;
7 MODBUS commands can be made serial HyperTerminal (serial assistant) OR ''Modbus Poll'' Enter;
8 Under the MODBUS command mode, it can support up to 64 devices in parallel
9 The default baud rate is 9600BPS. The baud rate can be selected through jumpers: 2400 4800 9600 19200BPS
10 Size: 136 * 72 * 18mm(Only PCB Board);140 * 88* 40mm(with Din Rail Box)
11 Weight:75g(Only PCB Board);175g(with Din Rail Box)
12 MOSFET load: 3.5-5V is 2A; 5-9V is 4A; 9-30V is 5A
For more information, please contact me
The MOSFET model is 20N06, and each output channel is an independent control unit, which does not interfere with each other. If one MOSFET is burnt out and it does not affect the work of other channels, just replace the MOSFET with a new one.
The advantages and disadvantages relative to the relay board:
Advantages: 1 small working current, 8-10MA (12V); 2 no sound when switching states; 3 light weight
Disadvantages: 1 load current is small, within 5A; 2 can only control DC 3.5-30V voltage
V1(V2-V8): Load input positive
GO1 (GO2-GO8): load output negative
G1 (G2-G8): load input negative
Note: The output indicator(CH1/2...8 LEDs) is only valid when there is load power
Application
 
PLC IO expansion board
Smart Home,Home Automation ,Wiser Home;
PTZ CCTV Camera
Security Monitoring
Identification system;
Motor FW & BW
Automatic curtain control
LED lighting system
DIN rail Box parameters:
Product model: UM72
Color: green
Width: suitable for PCB board width UM72(72mm)
Insulation grade: flame-retardant VO grade
Backplane length: suitable for 136 mm PCB boards
Net weight: 99g
Installation: DIN35 and C45 rail
 
 
 
 
 
Typical applications:
 
MODBUS RTU command mode (HEX), you can control a variety of ways: Serial Hyper Terminal Control (need to manually add the CRC), Modbus Poll software control (software automatically add the CRC), PLC or MCU process control
 
 
 
Wiring Diagram:
The power supply is DC 6-25V, the load is DC 3.5-30V circuit, the wiring is as shown in the figure below. The load ''LOAD'' can be high-power relays, LED lights, fans, motors, cameras and other DC 3.5-30V equipment
 
 
 
 
 
 
Test Software(We offer a demo video):
Serial HyperTerminal:
 
Modbus Poll
 
 
 
 

Below item is powered by Canton-Power Ltd . 
 
Product Name:  10pcs 1A DD0606SB_3V3 DC DC Converter Input 1.2V 1.5V 1.8V 2.5V Output 3.3V Step Up Boost Module for MCU Development Board
  
Packing list:
 
10 PCS DD0606SB_3V3 0.9V-3.3V TO 3.3V Step-up Boost Module
 
  
Description:
Input voltage DC 0.9 ~ 3.3V, output DC 3.3V( -5% )
 
DC DC Boost Converter Module working frequency 1MHZ.efficiency 65% -88% .
 
Operating temperature range : -25~ 85 Degrees Celsius
 
Storage temperature range : -45~ 125 Degrees Celsius
 
2.54mm pin pitch,MCU Development Board Breadboard friendly.
 
Size : 21.3mm x 12.5mm x 5.7mm(Very small)
 
Weight : 1.66g(Very light) 
 
 
 Applications
Battery powered equipment
Breadboard Power Supply
ARM STM32 FPGA CPLD Board
Wireless Module,  esp8266 nrf24l01 rtl8710 GSM etc
3.3V Small power motors
Camera, Video camera
3.3V Toy car
PDA
LED Lighting
Wireless communication equipment
Audio equipment 
 
 
Attention :
This is a DC-DC voltage converter module,Must be noted when using:
1 Input voltage can not be greater than the maximum input range
2 Output power can not be greater than the maximum load for a long time
3 Input power must be greater than the output power, because the power consumption of the module itself
 
Q & A:
     
Q : Why output voltage is less than the nominal voltage
A : Input power supply power is too low.Test the input voltage with a multimeter,a t this time of the input voltage is very low
 
 
 
   
 
 
 

  
 
Applications:
 
Solar charger 
Smart Home / Home Automation 
Monitor Power 
CCTV Power
PLC Power
LED Driver Power
Motor Driver Power
 
 
Product Name: 2pcs 5A DC-DC Converter 3.7V 5V 9V to 12V Step Up Voltage Converter 
 
 
 
Packing list:
2 pcs 5A DC-DC Converter Step Up 1.5V-12V to 12V;
2 pcs   PC  material shell
 
 
 
 
Description:
Module Properties: DC DC Converter  step-up BOOST module
DC-DC Boost module working frequency 300KHZ.efficiency 57% -92% .
Operating ambient temperature : -20~ 85 Degrees Celsius
 
 
Voltage ModuleSize 33mm x 33mm x 14mm
Shell Size : 41mm x 40mm x 20mm 
 
Maximum withstand voltage : 16V(When >12V,Output >12V)
Maximum input current : 5A(Instantaneous maximum value)
 
Input voltage DC 1.5 ~ 12V, output DC 12V( -5% )
Maximum output current: 3.4A
 
 
 
 
 
This is a DC-DC voltage converter module,Must be noted when using:
1 Input voltage can not be greater than the maximum input range
2 Output power can not be greater than the maximum load for a long time
3 Input power must be greater than the output power, because the power consumption of the module itself
 
Q & A:
Q : Why output voltage is less than the nominal voltage
A : Input power supply power is too low.Test the input voltage with a multimeter, a t this time of the input voltage is very low
 
   
 
 
 

 
 
Product Name:  DC 12V 8 Ch RS485 Relay Board Modbus RTU UART Remote Control Switch DIN35 Rail Box for PLC Automation control
 
 
 
Package inlcuded:
  1PCS DC 12V 8Ch Din35 Rail RS485 Modbus RTU Relay Module
 
 
Description: 
 
1: DC 12V power supply(Range 10-13V) 
 
2: Standby current (all relays closed) 12MA, 1 relay open 40MA, 2 relays open 68MA, 3 relays open 94MA,4 relays open 122MA,5 relays open 148MA,6 relays open 174MA, 7 relays open 198MA,8 relays open 224MA
 
3: ''open'' ''close''  ''Momentary'' ''Self-locking'' ''Interlock'' ''Delay'' 6 Commands
 
4: Two instruction-control mode : MODBUS RTU command and AT command
 
5: Under the ''Delay'' command ,the maximum delay is 255 seconds;
  Under the AT command ,the maximum delay is 9999 seconds
 
6 MODBUS commands can be made serial HyperTerminal (serial assistant)  OR ''Modbus Poll'' Enter; AT commands can be made serial HyperTerminal (serial assistant) Enter;
 
7 Under the MODBUS command mode, it can support up to 64 devices in parallel
 
8 The default baud rate is 9600BPS. The baud rate can be selected through jumpers: 2400 4800 9600 19200BPS
 
9  Size: 100 * 72 * 20mm(Only PCB Board);120 * 88* 42mm(with Din Rail Box)
10 Weight: 120g(Only PCB Board);198g(with Din Rail Box)
 
11 Maximum load: 10A / 250VAC, 10A / 125VAC, 10A / 30VDC, 10A / 28VDC, 10A / 12VDC
For more information, please contact me
DIN rail Box parameters:
Product model: UM72
Color: green
Width: suitable for PCB board width UM72(72mm PCB)
Insulation grade: flame-retardant VO grade
Backplane length: suitable for 100 mm PCB boards
Net weight: 72g
Installation: DIN35 and C45 rail
  
 
 
 
Application
   
Automated industry PLC
Smart Home,Home Automation ,Wiser Home;  
CCTV PTZ Camera
Security Monitoring
Identification system;
Motor FW & BW
Automatic curtain control
Automatic door control
 
Typical applications:
1 When controlling a module, you can use the MODUBS RTU instruction or the AT instruction. In AT command mode, the dial switch (slave address) is invalid and can only control one module at a time.
 
 
MODBUS RTU command mode (HEX), you can control a variety of ways: Serial Hyper Terminal Control (need to manually add the CRC), Modbus Poll software control (software automatically add the CRC), PLC or MCU process control
 
 
 
  
Wiring Diagram:
  
1 DC 12V control circuit,Wiring diagram below. ''LOAD'' may be camera,LED lights, fans, motors and other DC 12V equipment
 
 
 
  
2 DC 1-110V OR AC 85-265V control circuit,Wiring diagram below(Note:If not DC 12V load, need another DC 12V power supply). ''LOAD'' may be LED lights, fans, motors Lights, fluorescent lights, solar water heaters and other DC AC equipmen
 
 
 
Test Software(We offer a demo video):
Serial HyperTerminal:
  
Modbus Poll
 
 
 
 
 
 
 
 

 
 
Product Name:  DC 12V 8 Ch RS485 Relay Board Modbus RTU UART Remote Control Switch DIN35 Rail Box for PLC Automation control
 
 
 
Package inlcuded:
  1PCS DC 12V 8Ch Din35 Rail RS485 Modbus RTU Relay Module
 
 
Description: 
 
1: DC 12V power supply(Range 10-13V) 
 
2: Standby current (all relays closed) 12MA, 1 relay open 40MA, 2 relays open 68MA, 3 relays open 94MA,4 relays open 122MA,5 relays open 148MA,6 relays open 174MA, 7 relays open 198MA,8 relays open 224MA
 
3: ''open'' ''close''  ''Momentary'' ''Self-locking'' ''Interlock'' ''Delay'' 6 Commands
 
4: Two instruction-control mode : MODBUS RTU command and AT command
 
5: Under the ''Delay'' command ,the maximum delay is 255 seconds;
  Under the AT command ,the maximum delay is 9999 seconds
 
6 MODBUS commands can be made serial HyperTerminal (serial assistant)  OR ''Modbus Poll'' Enter; AT commands can be made serial HyperTerminal (serial assistant) Enter;
 
7 Under the MODBUS command mode, it can support up to 64 devices in parallel
 
8 The default baud rate is 9600BPS. The baud rate can be selected through jumpers: 2400 4800 9600 19200BPS
 
9  Size: 100 * 72 * 20mm(Only PCB Board);120 * 88* 42mm(with Din Rail Box)
10 Weight: 120g(Only PCB Board);198g(with Din Rail Box)
 
11 Maximum load: 10A / 250VAC, 10A / 125VAC, 10A / 30VDC, 10A / 28VDC, 10A / 12VDC
For more information, please contact me
DIN rail Box parameters:
Product model: UM72
Color: green
Width: suitable for PCB board width UM72(72mm PCB)
Insulation grade: flame-retardant VO grade
Backplane length: suitable for 100 mm PCB boards
Net weight: 72g
Installation: DIN35 and C45 rail
  
 
 
 
Application
   
Automated industry PLC
Smart Home,Home Automation ,Wiser Home;  
CCTV PTZ Camera
Security Monitoring
Identification system;
Motor FW & BW
Automatic curtain control
Automatic door control
 
Typical applications:
1 When controlling a module, you can use the MODUBS RTU instruction or the AT instruction. In AT command mode, the dial switch (slave address) is invalid and can only control one module at a time.
 
 
MODBUS RTU command mode (HEX), you can control a variety of ways: Serial Hyper Terminal Control (need to manually add the CRC), Modbus Poll software control (software automatically add the CRC), PLC or MCU process control
 
 
 
  
Wiring Diagram:
  
1 DC 12V control circuit,Wiring diagram below. ''LOAD'' may be camera,LED lights, fans, motors and other DC 12V equipment
 
 
 
  
2 DC 1-110V OR AC 85-265V control circuit,Wiring diagram below(Note:If not DC 12V load, need another DC 12V power supply). ''LOAD'' may be LED lights, fans, motors Lights, fluorescent lights, solar water heaters and other DC AC equipmen
 
 
 
Test Software(We offer a demo video):
Serial HyperTerminal:
  
Modbus Poll
 
 
 
 
 
 
 
 

Kit No. : RT407
 
 
Qty : 1 pcs PT2262 transmitter module and 2 pcs 4 channels relay switch ;
 
 
Transmitter :
 
 
 
Features / Specifications :
1. 8 buttons;
2. High stability, SMT chip, frequency stabilization SAW, ultra-high-frequency transistor;
3: Large power;
 
Technical Data :
Transmitter Module No.: TB423;
Power supply : 12V 23A battery (not included ) ,
 
 
Operating current: 28-33mA;
Oscillation mode: SAW resonator;
Modulation mode:ASK/OOK;
Operating frequency:433.92MHZ ;
Encoding format:  EV1527  fixed code ; 
Transmit power : 200mW ;
 
 
Relay receiver :
 
Typical applications:
DC 12V Home lighting system
Remote control switch
Smart Home / Home Automation
LED lighting
Fluorescent lamp
DC 12 DC Motor,RS360
Wiring Diagram 1:
DC 12V control circuit,Wiring diagram below. "LOAD" may be LED lights, fans, motors and other DC 12V
 
 
Wiring Diagram 2:
DC 1-110V OR AC 85-265V control circuit,Wiring diagram below(Note:If not DC 12V load, need another DC 12V power supply). "LOAD" may be LED lights, fans, motors and other DC AC equipment
 
 
Wiring Diagram 3:
All kinds of motor reversing control: DC 1-110V or AC 85-265V DC/AC Motor
 
 
 
Product Name : DC 12V 4CH 433MHz Delay RF Wireless Relay Controller For PT2262 EV1527 Encoder
 
Module No.: CE-RF22A04
Packing list:
1 PCS 433M DC 12V 4 Channel Multifunction Wireless Controller
Features:
1 Operating voltage : DC 12V
2 Operating Current: Standby current (all relays closed) 15MA, 1 relay open 42MA, 2 relays open 62MA, 3 relays open 94MA, 4 relays open 121MA
3 Operating frequency: 433.92M;
 
4 Receiver sensitivity : -108dBm
 
5 Decode : learning code, can be adapted EV1527 / PT2262(Click here)and compatible remote control, you can store up to 8 remote control
 
6 Work mode : Non-locking (Momentary is defult),Self-locking (Toggle),Inter-locking (Latch), Delay; Delay adjustable from 0.1 to 100 seconds, 0.1 seconds Resolution.
7 Size(Including housing)75*54*28mm
8 Weight: 77g
9 Relay Maximum load(Recommended<5A):10A/250VAC,10A/125VAC,10A/30VDC, 10A/28VDC ,10A/12VDC
Advantage :
1: Receiver Mother board have a learning key , if the remote is lost , must buy EV1527 OR Pt2262 remotes to re-learn;
 
 
Work mode
Delay mode user guide :
 
1 In delay mode(Mode 3),with a suitable screwdriver and gently rotating adjustable resistance;Clockwise, increasing delay,Counter-clockwise, the delay is reduced
 
2 Delay adjustable from 0.1 to 100 seconds, 0.1 seconds Resolution.
Glossary:
NO : Relay normally open contact
COM : Relay common contact
NC : Relay normally closed contact
Open : NO connection COM, NC disconnect COM
Close : NO disconnect COM, NC connection COM
Momentary : Press the Transmitter button A, the receiver Channel 1 is Open, release button A; the receiver Channel 1 is Close, the same as B ,Every Channel is Independent ;
Toggle : Press transmitter button A for 1 time , the receiver Channel 1 is Open, press button A again, the receiver Channel 1 is Close, the same as B. Every Channel is Independent ;
Latched : Press transmitter button A, the receiver Channel 1 is Open, the Channel 2 is Close.
Press transmitter button B, the receiver Channel 2 is Open, the Channel 1 is Close.
Delay : Press the Transmitter button A, the receiver Channel 1 is Open,After a set time delay, the receiver Channel 1 is Close, the same as B ,Every Channel is Independent;
If during the delay, press the button of Transmitter, delay start again; if the delay period, press and hold the button of Transmitter 3-4 seconds, the receiver controller stops the delay, the relay Close
 
Adapter remote control (learning remote control):
Under normal operating mode, LED will be lit, when receives a valid remote control (EV1527 / PT2262) button values, LED flashes
 
 
Clean code: press the button and held down, LED off, LED will light about 8 seconds later, clean code is completed (Note: After performing clean code previously stored remote control value does not exist)
 
 
Step 1 (into the learning mode): Press the button (about 1 second), LED off;
 
Step 2 (adapter channel 1): Then press the first button on the remote control, LED flashes four times off, then learning the first button value
 
Step 3 (Adaptation Channel 2): Then press the second button on the remote control, LED flashes four times brighter, then learned two key values
 
Step 4 (Adaptation Channel 3): Then press the third button on the remote control, LED flashes four times brighter, then learned two key values
 
Step 5 (Adaptation Channel 4): Then press the fourth button on the remote control, LED flashes four times brighter, then learned two key values
 

 
Product Name : 4pcs tiny DC 5V DPDT Relay Board Module HK19F PCB Board for Stereo video PLC Motor 18650 3d printer
 
Packing list:
    
4 PCS DR21A01 1 Channel DC 5V DPDT Relay Module
 
  
 
Description:
  
DR21A01 5VDC 1 Channel DPDT Relay Board
 
Operating Voltage : DC 5V
Operating Current(Relay ON): 35MA
Standby Current(Relay OFF) : <1MA
 
Input control signal voltage: 
                     0V - 0.6V Low stage (relay is OFF),
                     0.6V – 2.4V (unknown state).
                     2.4V - 24V High state (relay is ON).
Input control signal high state current:
                     2.4V: 0.15mA
                     5V: 0.4mA
                     12V: 1.2mA
                     20V: 2mA
 
Relay Load : 1A 125VAC;2A 30VDC
 
 
Size   : 22.86x18x14
Weight :7g
 
 
 
Schematic:
 
Connection with UNO:
 
   
Typical applications:
Automotive electronics
Audio and video equipment
UNO MEGA2560 DUE AVR MCU raspberry pi 
Small power Motor
LED
Smart Home
Emergency lighting
 
   
Arduiuo uno/mega2560 Code 
//******************************************************//
 
const int DPDT_control = 2;     // the number of the DPDT_control pin
 
void setup() {
 
  // initialize the DPDT_control pin as an output:
  pinMode(DPDT_control, OUTPUT);
}
 
void loop() {
 
    digitalWrite(DPDT_control, HIGH);//DTDT relay activation
    
    delay(1000);
 
    digitalWrite(DPDT_control, LOW);//DTDT relay inactive
    
    delay(1000);
  
}
//******************************************************//

 
Typical applications:
DC 12V Home lighting system 
Remote control switch
Smart Home / Home Automation
Garage Door
Fluorescent lamp Illumination
Motorcycle Electromobile
Remote controlled gates
Security Monitoring
LED lighting
Fluorescent lamp
DC 12 DC Motor,RS360
 
 
Wiring Diagram 1:
DC 12V control circuit,Wiring diagram below. "LOAD" may be LED lamp, fans, motors and other DC 12V Electrical equipment
 
 
 
 
Wiring Diagram 2:
DC 1-48V OR AC 85-265V control circuit,Wiring diagram below(Note:If not DC 12V load, need another DC 12V power supply). "LOAD" may be LED lamp, fans, motors and other DC AC equipment
 
  
Product Name : 315M DC 12V 1-5000S adjustable delay timer Wireless Relay Remote Switch
 
Packing list:
1 PCS 315M DC 12V one Channel Delay Switch
1 PCS 315 M   Large Power 2 Button EV1527  Remote Control (USE 12V 27A battery,Batteries not included)

 
receiver Features:
 
1 Operating voltage:  DC 12V;
 
2 Operating Current: relays close, about 9MA; relay open,about 42MA;
 
3 Operating frequency: 315M               
 
4 Receiver sensitivity : -108dBm
 
5 Decode  : learning code, can be adapted EV1527 / PT2262 and compatible remote control, you can store up to 32 remote control
 
6 Work mode : Non-locking (Momentary is defult),Self-locking (Toggle),Inter-locking (Latch),Delay; 1-5000 seconds adjustable delay time, minimum step 0.1 seconds
 
7 Size(Including housing)50*35*22mm
 
8 Weight(including housing) 30g
 
9 Relay Maximum load(Recommended<5A):10A/250VAC,10A/125VAC,10A/30VDC, 10A/28VDC,10A/12VDC
 
 
Work mode
NO          : Relay normally open contact
COM       : Relay common contact
NC          : Relay normally closed contact
Open       : NO connection COM, NC disconnect COM
Close      : NO disconnect COM, NC connection COM
Momentary  : Press the Transmitter button , the receiver relay is Open, release button;the relay  is Close;
Toggle        : Press transmitter button for 1 time , the receiver relay is Open, press button again, the relay  is Close;
Latched       : Press transmitter button A, the receiver relay is Open  Press transmitter button B, the receiver relay is Close.
Delay           : Press the Transmitter button, the receiver relay Open,After a set time delay, the receiver relay  is Close;
 
If during the delay, press the button of Transmitter, delay start again; if the delay period, press and hold  the button of Transmitter 3-4 seconds, the receiver controller stops the delay, the relay Close
 
Adapter remote control (learning remote control):
Under normal operating mode, LED will be lit, when receives a valid remote control (EV1527 / PT2262) button values, LED flashes
 
Clean code: press the key and held down, LED off, LED will light about 8 seconds later, clean code is completed (Note: After performing clean code previously stored remote control value does not exist)
 
Step 1 (into the learning mode): Press the key (about 1 second), LED off;
Step 2 (adapter button): Then press the utton on the remote control, LED flashes four times on, then learning the button value
 
Note: 
Only the Non-locking (Momentary is defult),Self-locking (Toggle),Inter-locking (Latch) mode to a "clear code" and " learning " action
 In the "delay" mode can only set the delay time
 
 
Delay setting:
Step 1, the mode is set to "delay" mode (jumper cap on the M1 into two rows of pins)
Step 2, press the key until the LED is off
Step 3. Click the key again, LED flashes
Step 4. Click the key again after a period of time, LED light
LED blinking time is the delay time.
 
 
 Power supply : 12V 27A battery   replacable  . (This remote doesnot have a battery , Please buy in your local market )
Operating current:  ≤ 12mA ;
Oscillation mode:  SAW resonator ;
Oscillation resistor : 330K
Modulation mode: ASK OOK ;
Operating frequency:315 MHz  ;
Frequency dev iation: ±0.2MHz ;
Encoding format: Million  Group Code (  EV1527 ) ;
Transmit power: 10 mW.
Data Rate : 50~60KHZ;
  
 
 

 
 Below item is powered by Canton-electronics Ltd .
 
​Note: Adjustable resistors (potentiometers) are components that are easily damaged. Use a suitable screwdriver to slowly rotate. Click here to buy a screwdriver.
 
Kit No: RT391 433MHz
pakcing list :  1 pcs receiver 1 pcs transmitter 
 
 Receiver :
 
Module No.: RF11A04
 
Description:
Model No.: RF11A04 OR CE-RF11A-045V
1. Features:
Operating voltage: DC 3-5V
Operating current: less 11mA (DC 5V)
Working priceple: super heterodyne
modulation Mode: OOK / ASK
Operating Frequency : 433.92MHZ
Receiving sensitivity: -108dBm
Output level: 5V TTL level, low standby, the maximum current 20MA (to add a current-limiting resistor)
Decode: learning code, adapted EV1527 / PT2262 and a compatible remote control, you can store up to eight remote control
Working modes: Non-locking (Momentary ), self-locking (Toggle), Inter-locking; 0.1-500000 seconds adjustable delay time
Size: 30x12.1x12.5mm
Weight: 4 grams or less
 
 
2. Pin Description
G: GND pin, DC 3-5V power supply negative
V: VCC pin, DC 3-5V positive power supply
D0: channel 1 output, active high
D1: channel 2 output, active high
D2: Channel 3 output, active high
D3: Channel 4 output, active high
VT: channel output valid signal, the microcontroller can be used as an interrupt signal
 
3. the working mode
 
You can select different modes of operation with"M4 M3 M2 M1 M0" pad in the delay mode to adjust the delay time through an adjustable resistor.
In delay mode, the rotary variable resistor can adjust the delay time. Increase the time counterclockwise rotation, and clockwise rotation to shorten the time. Adjustable resistor is a precision resistor, adjust the time with a Phillips screwdriver to gently rotate (do not use excessive force)
Working Mode Description:
Non-locking: Press the remote control button, the IO port outputs high. Release the remote control button, IO port outputs low.
Self-locking: Press the remote control button, the IO port outputs high. Press the remote control button again, IO port outputs low.
Interlock: Press the remote control button D0, D0 IO port outputs high, other IO ports outputs low; remote control button is pressed D1, D1 IO port outputs high, other IO ports output low and so on.
Delay: Under Delay mode, there is a delay 0/1/2/3/4 five sub-patterns, by adjusting the variable resistor IO port high duration
4, the adapter remote control (learning remote control)
In normal operation mode, LED (D1) will be lit, when receiving a valid remote control (EV1527 / PT2262) key value, LED will flash.
Clean code: hold the button to press.LED offs, keep pressing about 8 seconds until LED lights. At that time, clean code completion (Note: After the implementation of clean code, previous remote controls do not exist.
Adaptation (learning):
Step 1 (into the learning mode):trigger the key button, LED offs;
Step 2 (adapter channel 1): press the first button of remote control and then, LED offs after flashes for four times. This time means that it had learned the value of the first button
Step 3 (Adaptation Channel 2): Press the second remote control, LED offs after flashes 4 times, This time means that it had learned the value of the second button
Step 4 (adapter Channel 3): Then press the remote's third button, LED offs after flashes 4 times, This time means that it had learned the value of the third button
Step 5 (Adaptation Channel 4): Then press the remote control's fourth button, LED lights after flashes 4 times, This time means that it had learned the value of the fourth button.
NOTE: The process must be completed within 15 seconds
 
Adaptation Video,Click here!
 
5. Wiring Diagram :
Control LED indicator: see "RF11A04_LED demo"
Control 12V Relay: See "RF11A04_4Relay demo"
Click here for more help!
 
 
 
Connect with ardiuno :
 
 
 
 
 
 
Transmitter remotes:
 
 
Model No.
TB416 Encoder Transmitter
Function discription
Encoder Transmitter modules
Operating voltage
9V DC
Work current
>100mA
Operating frequency
433MHz
modulation Mode
ASK/OOK
SAW Frequency stability
±150kHz(max)
Transmitter power
>55mW
Data rate
≤10Kbps
Antenns length

24 cm (315 MHz), 18 cm (433.92 MHz)
Dimension
49*31*8mm
Encodeing format SC2262 fixing code (same as PT2264 PT2262 )   ,Work with PT2272 decoder IC
Transmitter distance 1000Meter (open area)
 
 
 
 
 
 
 

Below item is powered by Canton-Power Ltd . 
 
Product Name:   5pcs High Efficiency 1.2MHz 2A Step Up Converter DC 3V 3.3V 3.7V to 5V Boost Voltage Regulator Module Board
  
Packing list:
 
5 PCS 8W DD2424SA_5V 2V-5V TO 5V DC DC Boost Converter Module
 
  
Description:
 
Input voltage DC 2 ~ 5V,output DC 5V±4% (No-load voltage is 5-5.4V)
 
Internal 4A Switch Current Limit.
 
DC DC Boost Converter Module working frequency 1.2MHZ.
 
up to 96% Efficiency (usually is 70% -94% )
  
Operating temperature range : -40~ 85 Degrees Celsius
 
Storage temperature range : -65~ 150 Degrees Celsius
 
2.54mm pin pitch,for MCU Development Board Breadboard friendly.
 
Size : 22mm x 15.2mm x 6.2mm
 
Weight : 2g
 
 
   
Applications
 
Battery powered equipment
Breadboard Power Supply
ARM STM32 Arduiuo UNO MEGA2560 FPGA CPLD Board
Small power motors
Camera, Video camera
Toy car
power bank 
Phone PDA
LED Lighting
Wireless communication equipment
 
 
Attention :
 
This is a DC-DC voltage converter module,Must be noted when using:
1 Input voltage can not be greater than the maximum input range
2 Output power can not be greater than the maximum load for a long time
3 Input power must be greater than the output power, because the power consumption of the module itself
  
Q & A:
     
Q : Why output voltage is less than the nominal voltage
A : Input power supply power is too low.Test the input voltage with a multimeter,a t this time of the input voltage is very low
 
 
 
   
 
 
 
 

Typical applications:
ARDUIUO UNO MEGA2560 DUE
breadboard PCB Universal board
raspberry pi ARM 
DC 5V 9V 12V Home lighting system 
Smart Home / Home Automation
LED lighting
12V DC Motor,RS360
 5V DC Motor
 
There are a variety of installation,can for breadboard ,PCB, Universal board,UNO MEGA2560 raspberry pi
 
 
Wiring Diagram 1:
 5.5-12V DC operating voltage DC 5.5-12V devices
 
 
Wiring Diagram 2:
5.5-12V DC operating voltage ,DC 1-48V OR AC 85-265V devices
 
  
Wiring Diagram 3:
3 5V DC operating voltage ,DC 5 V devices
Wiring Diagram 4:
4 5V DC operating voltage ,DC 1-48V OR AC 85-265V devices
 
 
 
 
 
Product Name : Ultra-mini DC 5V 9V 12V 4CH RF Wireless Controller Relay Switch Kit for Arduiuo UNO MEGA2560 raspberry pi breadboard
 
Packing list:
1 PCS MINI 433M DC 5V 9V 12V 4 Channel Wireless Controller 
1 PCS  433M 4 Button EV1527 Remote Control( USE 12V 27A battery,Batteries not included )
1 PCS Plastic shell
1 PCS 2.54MM straight pin
1 PCS 2.54MM curved pin

 
 
Features:
 
1 Operating voltage: Power 1: DC  5V , 9V, 12V (range 5 -15V) ; Power 2: DC 4.2-5V
 
2 Operating current: Standby Current(12V 8MA, 5V 8MA); each relay operating current 40MA
 
3 Wireless frequency: 433M(315M version can be customized)
 
4 Receiver sensitivity: -108dBm
 
5 Decode: learning code, can be adapted EV1527 / PT2262 and compatible remote control, you can store up to 6 remote control
 
6 work mode: Non-locking (Momentary is defult),Self-locking (Toggle),Inter-locking (Latch)
 
7 Relay load voltage: DC 1-48V; AC 85-265V
 
8 Relay load current: <= 2A
 
9 Size: 49mmx25.5mmx14mm (Very small)
 
10 Weight: 16g(Very light)
  
Normally, we would adapter remote control and receiver.
If the item you received has not been adapted Or you need to add accessories, Please follow the instructions below
 
study method:
Clean code: Hold down the learn button down, LED stays on for 4-5 seconds and then turns off
Learning: Hold down the learn button, LED light after release; immediately press the remote control button, LED flashes three times, learning success
 
Use more details, please click here!
 
 
Work mode:
There are three Work modes, Non-locking (Momentary is defult),Self-locking (Toggle),Inter-locking (Latch)
two pads of T1  connected is Inter-locking (Latch) mode,two pads of T2  connected is Self-locking (Toggle),
All disconnect is Non-locking (Momentary is defult)
  
Mode Description:
Momentary : Press the Transmitter button A, the receiver Channel 1 is Open, release button A, the receiver Channel 1 is Close, the same as B ,Every Channel is Independent ;
Toggle     : Press transmitter button A for 1 time , the receiver Channel 1 is Open, press button A again, the receiver Channel 1 is Close, the same as BCD. Every Channel is Independent ;
Latch      : Press transmitter button A, the receiver Channel 1 is Open, the Channel 2/3/4 is Close.Press transmitter button B, the receiver Channel 2 is Open, the Channel 1/3/4 is Close.
 
 
 
 
433M 4 Button EV1527 Remote Control:
 
Power supply : 12V 27A battery  replacable .(This remote doesnot have a battery , Please buy in your local market )
Operating current:  ≤ 12mA ;
Oscillation mode:  SAW resonator ;
Oscillation resistor : 330K
Modulation mode: ASK OOK ;
Operating frequency: 433.92MHz  ;
Frequency dev iation: ±0.2MHz ;
Encoding format: Million  Group Code (  EV1527 ) ;
Transmit power: 10 mW.
Data Rate : 50~60KHZ;
  
 
 
 

 
Product Name :   10pcs 5W 7-40V to 5V DC DC Buck Converter Module Step-Down Voltage regulator Board          
    
 Packing list(Does not include L7805):
 
10 PCS DD4012SA_5V 6.5V-40V to 5V 1A DC DC Buck Converter Module 
    
 
Description: 
 
Input voltage 6.5~40V,output 5V
 
Maximum output current 1A
 
DC-DC Step-Down Converter module working frequency 550KHz. efficiency is 76-90% .
 
Quiescent current: about 1.5MA
 
Overtemperature shutdown, input under-voltage protection, BS-voltage protection, and short circuit protection.
 
2.54mm pin pitch,Can directly replace the L78XX LM78XX TO-220 IC
 
This is a DC-DC voltage converter module,Must be noted when using: 
 
1 Input voltage can not be greater than the maximum input range
2 Output power can not be greater than the maximum load for a long time
3 Input power must be greater than the output power, because the power consumption of the module itself
 
Applications:
   
5V MCU ARM STM32 CPU FPGA/CPLD 
5V Motor
CCTV camera
Wireless Module:Nrf24l01 CC1101 CC2500 CC2530 Zigbee
Smart home / home automation
Distributed Power Systems
Battery Charger
Pre-Regulator for Linear Regulators
​replace AMS1117-5.0 LM7805 LDO 
​  

Below item is powered by Canton-electronics Ltd .
 
Kit No: RT383 315MHz
 
 Receiver :
 
 
 
 
Demo :
 
 
 
Connect with ardiuno :
 
 
 
 
 
Model No.

TB417
Operating voltage

5.0VDC ±0.5V
 Working priceple

 Super Heterodyne receiver with decoder , learning type . decoding PT2262, PT2260, PT2240, EV1527 and other learning codeto chip or compatible chips, can learn and store 20 pcs different coded remote control. Intelligently distinguish shock resistance between fixed code and learning code , such as PT2262 and EV1527.
Static current

≤7 mA (DC 5V)
Operating frequency

315kHZ
modulation Mode

ASK/OOK
Receiving sensitivity

over -110 dBm (50 Ω)
Speed

< 5 K bps (at 315 MHz, -95 dBm)
Operating temp.

-10 °C ~ 60 °C
Max rate 1 KHZ
Antenns length

20 cm (315 MHz), 18 cm (433.92 MHz)
Dimension

30*13mm
Output signal

TTL level , Momentary, Latch, Toggle ,user can set it  by welding, Latch is defult.
Band width

2MHz(315MHz, Sensitivity go down 3dBm test )
 
Output
A.Momentary ----all disconnect (defult) ;
B. Toggle ---- connect T ;
C.Latch ---- connect L  ;
 
1: This is a simple wireless remote control module, no additional instructions.
2 : VT output high (5V TTL level) when signal received;
3: D1 D2 D3 D4 four data pins corresponding to four buttons on the remote control, for example: when the A button on the remote control is pressed, D1 high output, etc.
4: VT and D1-4 pins are 5V TTL pin 10MA maximum energy output current can drive the MCU port or LED lights .
 
Inter-locking (Latch): 4-way relay each other to switch, when relay A  is working and locked  ,  relay B C D corresponding to switch off; when B is working and locked , corresponding relay A C D swith off ; Only 1 relay is on among 4 relays A B C D;
 
Non-locking  type (Momentary): Press A and hold it , then A is on.Same as Relay B C D ;
 
Self-lock type (Toggle): 4 chanels opens and closes independently, 4 chanels can work together ,they don’t affect each other . press A button, A relay of work and locked, press again then  disconnected; Same as B C D .
 
User guide :
1: Learing ID : Press learning button , LED is on and beginning to learn ;after learning , LED will flash for a while .Then LED will keep being on to learn the next remote. If perss the learned remoter controller , auto-quit learning within 10 seconds;
2: Delete ID : Keep pressing learning button for 5 seconds , LED will be on and enter deleting . LED off means finishing deleting;
3: Antenna with a soft wire or other hard metals (such as whip antenna), try to straighten. Do not go near metal objects;
4: Power supply voltage requires stable and low ripple factor, multi-level filtering (such as adding beads, inductors, capacitors, etc.);
 
Transmitter remotes:
 
Model No.
TB416 Encoder Transmitter
Function discription
Encoder Transmitter modules
Operating voltage
9V DC
Work current
>100mA
Operating frequency
433MHz
modulation Mode
ASK/OOK
SAW Frequency stability
±150kHz(max)
Transmitter power
>55mW
Data rate
≤10Kbps
Antenns length

24 cm (315 MHz), 18 cm (433.92 MHz)
Dimension
49*31*8mm
Encodeing format SC2262 fixing code (same as PT2264 PT2262) , Work with PT2272 decoder IC
Transmitter distance 1000Meter (open area)
 
Connect to MCU or Ardiuno :
 
Connect to Switch:
 
 
 
 

 
 
 

Note: Adjustable resistors (potentiometers) are components that are easily damaged. Use a suitable screwdriver to slowly rotate. Click here to buy a screwdriver.
 
Product Name:5x 1Mhz Step-up Current Mode PWM Conveter USB 3.7V 4.2V 5V  to DC 6V 7V 8V 9V 10V 11V 12V 13V 14V 15V Output Power supply module
 
Packing list 
5 pcs USB 5V to 6-15.5V DC DC Converter (input DC 3-6V , output DC 6-15.5V) ;
 
Description: 
 
Input voltage 3~6V, output 6-15.5V
Maximum input current :  1.4A
Long-term work Current : 1A
Conversion efficiency : 78-91%
  
Input   :  USB  Male  Interface, DC 3-6V;  
 
Ouput :  2 PIN  XH2.54,  DC 6-15.5V; 
If input dc 5v,output 6-15.5V Adjustable
 
Power :  Maximum 7W;
  
DC-DC Boost module working frequency 1.0MHZ. 
Operating ambient temperature : -40~ 85 Degrees Celsius .
Size 47.5mm x 16mm
Weight : about 4.5g(light)
  
Applications:
 
6V 8V 9V 12V 15V Low Power Motor
6-15V LED Lighting
Hard drive power supply
9V 12V 15V Routers and network equipment
Wireless communication equipment
315M 433M Wireless remote controller
 
  
Attention :
  
This is a DC-DC voltage converter module,Must be noted when using:
1 Input voltage can not be greater than the maximum input range
2 Output power can not be greater than the maximum load for a long time
3 Input power must be greater than the output power, because the power consumption of the module itself
 
Q & A:
Q : Why output voltage is less than the nominal voltage
A : Input power supply power is too low.Test the input voltage with a multimeter,a t this time of the input voltage is very low
 
    
Modify Parameter Description:   
 
1.4A current limiting resistor,Remove the resistance, the maximum input current can reach 2A.
But IC have "Over Temperature Protection" Function.It will turn off the power MOSFET automatically when the internal junction temperature is over 150 Degrees Celsius. The power MOSFET wake up when the junction emperature drops 30 Degrees Celsius under the OTP threshold temperature
The master chip is FP6291(Made in Taiwan)
 
 
Application :

   
 
Typical applications:
 
 
 
Home lighting system
 
Remote control switch
 
Remote locking
 
Garage door remote control
 
Smart Home / Home Automation
 
DC 12V LED lighting
 
Fluorescent lamp
 
AC DC Motor
 
Fluorescent lamp
 
Automotive electronics
 
Industrial automation and control
 
Access Control System
 
Security Monitoring
 
 
 
 
 
 
1 DC 12V control circuit,Wiring diagram below. ''LOAD'' may be LED lights, fans, motors and
other DC 12V equipment
 
 
 
 
 
 
2 DC 1-110V OR AC 85-265V control circuit,Wiring diagram below. ''LOAD'' may be LED lights, fans, motors and other DC AC equipment
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Product Name:
DC 12V 8 Channel Android Phone Bluetooth Control Relay Module for Smart Home LED Lighting system
 
 
 
 
 
 
 
Package inlcuded:
 
 
 
1 pcs DC 12V 8 Channel  Android
 
 
Bluetooth Relay Module
 
 
 
 
 
Description:
 
 
 
1 Operating voltage: DC 12V
 
 
2 Operating Current: Standby current (all relays closed) 15MA, 1 relay open 41MA, 2 relays open 69MA, 3 relays open 96MA, 4 relays open 123MA,5 relays open 150MA,6 relays open 177MA,
 
7 relays open 203MA,8 relays open 229MA.
 
 
3: send commands via Android Bluetooth APP control relay turned on and off (we provide Bluetooth APP, you can also use your own APP to control relays, sending commands to control)
 
 
 
4 ''Momentary'' ''Self-locking'' ''Interlock'' ''open'' ''close'' 5 Commands
 
 
 
5
You can modify the Bluetooth name and PIN(Access Password) use ''
UST to TTL232'',
 
For details, see file '' Bluetooth parameter modification''
 
 
 
6 size 96*68*19mm
 
 
 
7 Weight : 117g
 
 
 
NOTE:
 
Only for Android OS, does not support the Apple OS
 
 
 
 
 
 
 
For more information, please contact me
 
 
 
 
 
 
 
 
 
 
 
 
 

 
Product Name: 5pcs 9V 12V 15V 24V Buck Charger Module with 6.5V-40V to 5V DC DC step down Converter
 
 
Packing list:
5 PCS  DD40CRTA  DC 6.5-40V to 4.2V 5V Buck Charging board 
 

  
 
Description: 
   
DC 6.5-40V  Lithium Battery Charger Module - Linear charging.
  
Input voltage 6.5-40V
Output 1 : DC 4.2V/0-1A, as battery Charger
Output 2 : DC 5V/0-1A,   as 40-6.5V to 5V Step down module    
Maximum charging current : 1000MA 
Full charge voltage : 4.2V -2% .
Led indicator : ''OK'' LED is fully charged OR battery failure status indicator;
                       ''CR'' LED is charge status indicator
Operating ambient temperature :  -40° to 85°
Storage temperature :  -65° to 125°
 
Size   : 32x16x5.8mm
Weight : 2.3g
 
  
Can be used DC 6.5V-40V power supply charger(Such as Solar panels)Charging module comes with charge-management functions, will not overcharge or over discharge
     
Comes with rechargeable function,Will enter standby mode when fully charged.When the battery capacity is below 80% , the charging start.
 
  
Applications:
Battery powered equipment
Lithium Battery 18650 
Mobile phone
Solar charging
MP3/MP4 player
Audio equipment
Portable Devices
Bluetooth Applications
Wifi Applications
 

 
 
 

 
Typical applications:
DC 12V Home lighting system 
Garage Door
Elevators
Motor reversing control
Remote control switch
Smart Home / Home Automation
LED lighting
Fluorescent lamp
DC 12 DC Motor,RS360
 
 
Wiring Diagram 1:
DC 12V control circuit,Wiring diagram below. "LOAD" may be LED lights, fans, motors and other DC 12V
 
 
 
 
Wiring Diagram 2:
DC 1-110V OR AC 85-265V control circuit,Wiring diagram below(Note:If not DC 12V load, need another DC 12V power supply). "LOAD" may be LED lights, fans, motors and other DC AC equipment
 
 
 
Wiring Diagram 3:
 All kinds of motor reversing control: DC 1-110V or AC 85-265V DC/AC Motor
 
Product Name : 433.92M DC 12V 4Ch Multifunction Wireless Controller Timer Delay Relay RF Switch & EV1527 ASK OOK Remote control
 
Packing list:
1 PCS 433M DC 12V 4 Channel Multifunction Wireless Controller 
1 PCS  433M   Large Power 4 Button EV1527  Remote Control (USE 12V 27A battery,Batteries not included)
 

 
 
Technical indicators:
1 Operating voltage : DC 12V
 
2 Operating Current: Standby current (all relays closed) 15MA, 1 relay open 42MA, 2 relays open 62MA, 3 relays open 94MA, 4 relays open 121MA
 
3 Operating frequency: 433.92M;                
    
4 Receiver sensitivity : -108dBm
  
5 Decode  : learning code, can be adapted EV1527 / PT2262(Click here)and compatible remote control, you can store up to 8 remote control
   
6 Work mode : Non-locking (Momentary is defult),Self-locking (Toggle),Inter-locking (Latch), Delay; Delay adjustable from 0.1 to 100 seconds, 0.1 seconds Resolution.
 
7 Size(Including housing)75*54*28mm
 
8 Weight: 77g
 
9 Relay Maximum load(Recommended<5A):10A/250VAC,10A/125VAC,10A/30VDC, 10A/28VDC ,10A/12VDC
 
  
Normally, we would adapter remote control and receiver.
If the item you received has not been adapted Or you need to add accessories, Please follow the instructions below
Learning method and steps:
Under normal operating mode, LED will be lit, when receives a valid remote control (EV1527 / PT2262) button values, LED flashes
 
Clean code: press the button and held down, LED off, LED will light about 8 seconds later, clean code is completed (Note: After performing clean code previously stored remote control value does not exist)
 
Step 1 (into the learning mode): Press the button (about 1 second), LED off;
Step 2 (adapter channel 1): Then press the first button on the remote control, LED flashes four times off, then learning the first button value
Step 3 (Adaptation Channel 2): Then press the second button on the remote control, LED flashes four times brighter, then learned two key values
Step 4 (Adaptation Channel 3): Then press the third button on the remote control, LED flashes four times brighter, then learned two key values
Step 5 (Adaptation Channel 4): Then press the fourth  button on the remote control, LED flashes four times brighter, then learned two key values
 
Use more details, please click here!
 
 
 
 
433M 4 Button EV1527 Remote Control:
 
Power supply : 12V 27A battery  replacable .(This remote doesnot have a battery , Please buy in your local market )
Operating current:  ≤ 12mA ;
Oscillation mode:  SAW resonator ;
Oscillation resistor : 330K
Modulation mode: ASK OOK ;
Operating frequency: 433.92MHz  ;
Frequency dev iation: ±0.2MHz ;
Encoding format: Million  Group Code (  EV1527 ) ;
Transmit power: 10 mW.
Data Rate : 50~60KHZ;
 
 

Work mode
   
 
 
Typical applications:
DC 12V Home lighting system 
Garage Door
Elevators
Motor reversing control
Remote control switch
Smart Home / Home Automation
LED lighting
Fluorescent lamp
DC 12 DC Motor,RS360
 
 
Wiring Diagram 1:
DC 12V control circuit,Wiring diagram below. "LOAD" may be LED lights, fans, motors and other DC 12V
 
 
 
 
Wiring Diagram 2:
DC 1-48V OR AC 85-265V control circuit,Wiring diagram below(Note:If not DC 12V load, need another DC 12V power supply). "LOAD" may be LED lights, fans, motors and other DC AC equipment
  
Product Name : 2x EV1527 Keyfob & DC 12V 2Ch RF Timer Delay Relay Remote Switch for Smart Home Motor LED 433M 
 
Packing list:
1 PCS 433M DC 12V 2 Channel Multifunction Wireless Controller 
2 PCS  433M   Large Power 2 Button SC 2262 Remote Control (USE 12V 27A battery,Batteries not included)

 
 
 
Technical indicators:
Operating voltage : DC 9-13V (recommended DC 12V);5V version can be customized
Operating Current : All relays close,about 14MA; one relay open,about 43MA;two relay  open,about 71MA
Operating frequency : 433.92M; 315M version can be customized
Receiver sensitivity  : -108dB;
Work mode       : Non-locking (Momentary is defult),Self-locking (Toggle),Inter-locking (Latch),  Delay;Each channel independently set the Work mode; 500,000 seconds maximum delay
 
Size(Including housing)  : 75*54*28mm
Learning function (can works with EV1527 and PT2262 remote, can store 16 pcs different code remote );
Max load : 500W;
  
Normally, we would adapter remote control and receiver.
If the item you received has not been adapted Or you need to add accessories, Please follow the instructions below
Learning method and steps:
Under normal operating mode, LED will be lit, when receives a valid remote control (EV1527 / PT2262) button values, LED flashes
   
Clean code: press the button and held down, LED off, LED will light about 8 seconds later, clean code is completed (Note: After performing clean code previously stored remote control value does not exist)
     
Step 1 (into the learning mode): Press the button (about 1 second), LED off;
Step 2 (adapter channel 1): Then press the first button on the remote control, LED flashes four times off, then learning the first button value
Step 3 (Adaptation Channel 2): Then press the second button on the remote control, LED flashes four times brighter, then learned two key values
 
Use more details, please click here!
 
 

 
 
433M 2 Button EV1527 Remote Control:
 
Power supply : 12V 27A battery  replacable .(This remote doesnot have a battery , Please buy in your local market )
Operating current:  ≤ 12mA ;
Oscillation mode:  SAW resonator ;
Oscillation resistor : 330K
Modulation mode: ASK OOK ;
Operating frequency: 433.92MHz  ;
Frequency dev iation: ±0.2MHz ;
Encoding format: Million  Group Code (  EV1527 ) ;
Transmit power: 10 mW.
Data Rate : 50~60KHZ;
  
 
 
 

 
 
Product Name:433M 20dB Serial Port RF Wireless Transmission Module Wireless pass-through UART RS232 Board replace GPRS GSM WIFI Bluetooth DTU
 
 
 
Recommendation: buy 2 pcs
 
 
 
 
Qty :
 
1 pcs 433M RS232 Data transparent transmission module#with Plastic shell#;
 
1 pcs 433M SMA Antenna
 
1 pcs DC5#5mm to DC3#5mm Power cable
 
 
 
 
 
Overview:
HY-RS232 series is a low cost, high performance transparent FSK transceiver with operating at 433/470/868/915 MHz. It features small size, high output power, high sensitivity,long transmission distance and high communication data rate with auto set up for communication change and data receiving and transmission control. There is UART interface, it is easy to realize the wireless data transmission with only providing the UART data. It is flexible for the users to set the UART baud rate, frequency,output power, data rate, frequency deviation, receiving bandwidth etc parameters. It is your ideal choice for designing wireless data transmission products which can be widely used on wireless data transmission field.
 
 
 
Features
 
Baud Rate : 1200-115200bps#Default: 9600#;
 
Work voltage: DC 5V #Range:4.5~8V#;
 
FSK modulation, 2-way half -duplex communication, strong anti-interfere;
Maximal output power100mW#20dBm#,output power adjustable between 1-20dBm;
Sensitivity -117dBm;
Supply current for Tx 100mA@20dBm, 40mA@14dBm;
Supply current for Rx 25mA;
Low current sleep mode 1uA;
Standard RS232 DB9 COM interface;
Operation frequency can be configured, acceptable for several modules working in different frequency with no disturbance on each other;
Optional for frequency deviation and receiving ISM bandwidth, users can be modulated by software;
Easily use, auto exchange on communication & transceiver;
Communication speed 1.2kbps -115.2kbps,can be modulated through software;
Afford ENABLE control signal,user self control work duty cycle;
RSSI function;
With LED indication;
Longer transmission distance,over 1Km in open air;
Small size 43.7*34X1.2MM,9 PIN DIP & 9 PIN SMD package,easy for assembly;
Tuning free;
Accord FCC,ETSI standard;
 
 
 
Application
Remote control, remote measurement system;
Wireless meter;
 
Smart Home,Home Automation ,Wiser Home;
Access control ;
Identification system;
Data collection;
IT household appliance;
Intelligence household appliance ;
Baby monitoring system;
 
 
 

Below item is powered by Canton-Power Ltd.
 
Product Name:  10PCS FP6291 1.4A Step-Up Current Mode PWM Converter Voltage Regulator Module DC 2.6-6V to 3-15v Adjustable Output Power supply
  
Packing list:
 
10 PCS 2.6V-6V TO 3-15V adjustable Step-up Boost Module
 
Description:
 
Input voltage 2.6~6V,output 3~15V adjustable
Maximum input current :  1.4A
Long-term work Current : 1.2A
Conversion efficiency : 79-90%
   
DC-DC Boost module working frequency 1.0MHZ. 
Operating ambient temperature : -40~ 85 Degrees Celsius
2.54mm pin pitch,Arduiuo UNO MEGA2560 DUE Breadboard XILINX ALTERA LATTICE FPGA/CPLD AVR  Development Board friendly.
 
Excluding Pin Size 20mm x 10.16mm x 5.6mm(Very small)
Weight : about 1.3g(Very light)
 
Note: Adjustable resistors (potentiometers) are components that are easily damaged. Use a suitable screwdriver to slowly rotate. Click here to buy a screwdriver.
 
 
Start Voltage 2.6V, Output Current 10MA
Input  Voltage

Input  Current

Output  Voltage

Output  Curren
2.8V

0.94A

3V

0.7A
2.8V

1.05A

3.3V

0.7A
3V

0.93A

3.26V

0.7A
2.8V

1A

3.72V

0.63A
3V

1.16A

3.7V

0.77A
3.3V

1A

3.7V

0.74A
2.8V

1A

4.5V

0.52A
3V

1.15A

4.52V

0.62A
3.3V

1.2A

4.5V

0.72A
3.7V

1.2A

4.49V

0.83A
2.8V

1A

5.07V

0.46A
3V

1.13A

5.06V

0.55A
3.3V

1.2A

5.04V

0.66A
3.7V

1.23A

5.02V

0.76A
4.5V

1A

5V

0.79A
 
     
2.8V

1A

6.09V

0.38A
3V

1.12A

6.10V

0.46A
3.3V

1.22A

6.08V

0.54A
3.7V

1.22A

6.06V

0.63A
4.5V

1.2A

6.03V

0.78A
5V

1.3A

6.00V

0.95A
2.8V

0.64A

9.11V

0.17A
3V

0.78A

9.12V

0.22A
3.3V

0.98A

9.14V

0.3A
3.7V

1.20A

9.15V

0.41A
4.5V

1.32A

9.16V

0.56A
5V

1.3A

9.15V

0.63A
6V

1.2A

9.11V

0.71A
3V

0.15A

12.15V

0.03A
3.3V

0.51A

12.18V

0.12A
3.7V

0.87A

12.23V

0.23A
4.5V

1.33A

12.16V

0.42A
5V

1.4A

12.16V

0.5A
6V

1.2A

12.17V

0.53A
 
 
Applications
 
MCU Development Board,FPGA/CPLD UNO MEGA2560 DUE 8051 AVR C8051 etc
PLC  RS485 Modbus RTU
Network equipment/Router
Temperature and humidity sensor
LED Lighting
Instruments and meters
5V 6V 9V 12V Relay board
Wireless communication equipment
315M 433M Wireless remote controller
 
Attention :
  
This is a DC-DC voltage converter module,Must be noted when using:
1 Input voltage can not be greater than the maximum input range
2 Output power can not be greater than the maximum load for a long time
3 Input power must be greater than the output power, because the power consumption of the module itself
 
Q & A:
 
Q : Why output voltage is less than the nominal voltage
A : Input power supply power is too low.Test the input voltage with a multimeter,a t this time of the input voltage is very low
 
 
how to use:
With a suitable screwdriver, slowly rotating adjustable resistance
 
 
 

 
 
 
Typical applications:
DC 12V Home lighting system 
Remote control switch
Smart Home / Home Automation
LED lighting
Fluorescent lamp
DC 12 DC Motor,RS360
 
 
Wiring Diagram 1:
DC 12V control circuit,Wiring diagram below. "LOAD" may be LED lights, fans, motors and other DC 12V
 
 
 
 
Wiring Diagram 2:
DC 1-48V OR AC 85-265V control circuit,Wiring diagram below(Note:If not DC 12V load, need another DC 12V power supply). "LOAD" may be LED lights, fans, motors and other DC AC equipment
 
Product Name : DC 12V Multifunction Wireless Controller Timer Delay Relay Learning code for EV1527 PT2262 ASK OOK Remote control
 
Packing list:
1 PCS 315M DC 12V 2 Channel Multifunction Wireless Controller 
 

 
Features:
1 Operating voltage: DC 9-13V (recommended DC 12V);5V version can be customized
2 Operating Current: All relays close,about 14MA; one relay open,about 43MA;two relay  open,about 71MA
3 Operating frequency: 315M; 433M version can be customized            
4 Receiver sensitivity : -108dBm
5 Decode  : learning code, can be adapted EV1527 / PT2262 and compatible remote control, you can store up to 16 remote control
6 Work mode : Non-locking (Momentary is defult),Self-locking (Toggle),Inter-locking (Latch),  Delay;Each channel independently set the Work mode; 500,000 seconds maximum delay
7 Size(Including housing)75*54*28mm
8 Relay Maximum load(Recommended<5A):10A/250VAC,10A/125VAC,10A/30VDC, 10A/28VDC ,10A/12VDC
 
Advantage :
1: Receiver Mother board have a learning key , if the remote is lost , must buy EV1527 OR Pt2262 remotes to re-learn;
 
 
Work mode
   
 
Working mode user guide :
 
1: Each Channel have 4 working mode :  Delay time , Toggle mode (singnal Self-locking), Momentary Mode ( singnal None-locking) , Latch mode (singnal Inter-locking) .
 
2: working mode of each channel need to be set individually ,  2 channels can have 10 different working mode combinenatoin ,
Detail :
one channel is Momentary , the other channel is Latch ;
one channel is Momentary , the other channel is Momentary ;
one channel is Momentary , the other channel is Toggle ;
oone channel is Momentary , the other channel is Delay time  ;
one channel is Toogle , the other channel is Delay Time  ;
one channel is Toogle , the other channel is Latch  ;
one channel is Toogle , the other channel is Toggle  ;
one channel is Latch , the other channel is Delay Time  ;
one channel is Latch  , the other channel is Latch  ;
one channel is Delay time  , the other channel is Delay Time  ;
 
3:  Time of each delay mode  is proportionally increased. For example, you want to channel 1 to delay 50 seconds , 500seconds and 5000 seconds, you can first seting channel 1 is set to "delay 1 (Delay Mode 3), turn around (CH1_adj) adjustable resistance, so that channel 1 delay 50 seconds; if the mode is set to "delay 2 (mode 4), the delay time becomes 500 seconds, if the mode is set to" delay 3 (mode 5), the delay time becomes 5000 seconds
 
4 With a suitable screwdriver and gently rotating adjustable resistance;Clockwise, increasing delay,Counter-clockwise, the delay is reduced
Glossary:
NO         : Relay normally open contact
COM       : Relay common contact
NC         : Relay normally closed contact
Open      : NO connection COM, NC disconnect COM
Close      : NO disconnect COM, NC connection COM
Momentary : Press the Transmitter button A, the receiver Channel 1 is Open, release button A; the receiver Channel 1 is Close, the same as B ,Every Channel is Independent ;
Toggle  : Press transmitter button A for 1 time , the receiver Channel 1 is Open, press button A again, the receiver Channel 1 is Close, the same as B. Every Channel is Independent ;
Latched : Press transmitter button A, the receiver Channel 1 is Open, the Channel 2 is Close.
        Press transmitter button B, the receiver Channel 2 is Open, the Channel 1 is Close.
Delay : Press the Transmitter button A, the receiver Channel 1 is Open,After a set time delay, the receiver Channel 1 is Close, the same as B ,Every Channel is Independent;
If during the delay, press the button of Transmitter, delay start again; if the delay period, press and hold  the button of Transmitter 3-4 seconds, the receiver controller stops the delay, the relay Close
 
 
 
Adapter remote control (learning remote control):
 
Under normal operating mode, LED will be lit, when receives a valid remote control (EV1527 / PT2262) button values, LED flashes
 
Clean code: press the button and held down, LED off, LED will light about 8 seconds later, clean code is completed (Note: After performing clean code previously stored remote control value does not exist)
 
Step 1 (into the learning mode): Press the button (about 1 second), LED off;
Step 2 (adapter channel 1): Then press the first button on the remote control, LED flashes four times off, then learning the first button value
Step 3 (Adaptation Channel 2): Then press the second button on the remote control, LED flashes four times brighter, then learned two key values
 
 

 
Typical applications:
DC 5V 9V 12V Home lighting system 
Garage Door
Elevators
Motor reversing control
Remote control switch
Smart Home / Home Automation
LED lighting
Fluorescent lamp
DC 12 DC Motor,RS360
 
 
Wiring Diagram 1:
 5.5-12V DC operating voltage DC 5.5-12V devices
 
 
Wiring Diagram 2:
5.5-12V DC operating voltage ,DC 1-48V OR AC 85-265V devices
 
  
Wiring Diagram 3:
3 5V DC operating voltage ,DC 5 V devices
Wiring Diagram 4:
4 5V DC operating voltage ,DC 1-48V OR AC 85-265V devices
 
 
 
 
 
Product Name : Super Mini DC 5V 9V 12V 433.92M 4CH RF Wireless remote control Relay Switch for PT2262 EV1527 Fixed Learning code 
 
Packing list:
1 PCS MINI 433M DC 5V 9V 12V 4 Channel Wireless Controller 
1 PCS Plastic shell
1 PCS 2.54MM straight pin
1 PCS 2.54MM curved pin
 

Compatiable PT2262 EV1527 transmitter , this board can only work with EV1527 encoder or PT2262 encoder.
 
Features:
 
1 Operating voltage: Power 1: DC 12V, 9V (range 5.5-15V) ; Power 2: DC 5V
 
2 Operating current: Standby Current(12V 8MA, 5V 8MA); each relay operating current 40MA
 
3 Wireless frequency: 433M(315M version can be customized)
 
4 Receiver sensitivity: -108dBm
 
5 Decode: learning code, can be adapted EV1527 / PT2262 and compatible remote control, you can store up to 6 remote control
 
6 work mode: Non-locking (Momentary is defult),Self-locking (Toggle),Inter-locking (Latch)
 
7 Relay load voltage: DC 1-48V; AC 85-265V
 
8 Relay load current: <= 2A
 
9 Size: 49mmx25.5mmx14mm (Very small)
 
10 Weight: 16g(Very light)
Pin Description:
Vin: Power supply 1 input positive (voltage range: 5.5-15V, recommend 9V 12V)
5V : Power supply 2 Input positive , DC 5V input (Note: power supply 2 can not reverse, otherwise it will burn circuit boards)
gnd: Power supply 1/2 power input ground-
NC1: Channel 1 normally closed contact
CM1: Channel 1 common contact
NO1: Channel 1 normally open contact
NC2: Channel 2 normally closed contact
CM2: Channel 2 common contact
NO2: Channel 2 normally open contact
NC3: Channel 3 normally closed contact
CM3: Channel 3 common contact
NO3: Channel 3 normally open contact
NC4: Channel 4 normally closed contact
CM4: Channel 4 common contact
NO4: Channel 4 normally open contact
Work mode:
There are three Work modes, Non-locking (Momentary is defult),Self-locking (Toggle),Inter-locking (Latch)
two pads of T1  connected is Inter-locking (Latch) mode,two pads of T2  connected is Self-locking (Toggle),
All disconnect is Non-locking (Momentary is defult)
  
Mode Description:
Momentary : Press the Transmitter button A, the receiver Channel 1 is Open, release button A;     the receiver Channel 1 is Close, the same as B ,Every Channel is Independent ;
Toggle     : Press transmitter button A for 1 time , the receiver Channel 1 is Open, press button A again, the receiver Channel 1 is Close, the same as BCD. Every Channel is Independent ;
Latch      : Press transmitter button A, the receiver Channel 1 is Open, the Channel 2/3/4 is Close.Press transmitter button B, the receiver Channel 2 is Open, the Channel 1/3/4 is Close.
study method:
Clean code: Hold down the learn button down, LED stays on for 4-5 seconds and then turns off
Learning: Hold down the learn button, LED light after release; immediately press the remote control button, LED flashes three times, learning success
Note: The remote control means: EV1527 / PT2262 and compatible remote control
 
The module is equipped with housing, straight pin and curved needle. You can have a variety of installation
 
 

Below item is powered by Canton-electronics Ltd .
 
Qty :  1 pcs 8Button Fixed code remote ;
 
 
 
 
Features / Specifications :
 
1. 8 buttons;
2. High stability, SMT chip, frequency stabilization SAW, ultra-high-frequency transistor;
3: Large power;
 
Technical Data :
Transmitter Module No.: TB428;
Power supply : DC9V 6F22 battery (not included )  ,
Oscillation mode: SAW resonator;
Modulation mode:ASK/OOK AM ;
Operating frequency:433.92MHZ ;
Encoding format: EV1527 ;
RC  Resistance : 330K; 
Standby current: 0mA
Working current:> 80mA
Transfer rate: <10Kbps
Operating temperature: -10  ~   70 
Size: 136 * 42.2 * 25mm
power switch: the remote control can be turned off when not in use for power saving.
 
Remote distance
We are talking about remote control distance transmitter / receiver module to work alone, and are connected with one quarter of the wavelength of the metal antenna, and in a vertical state operation at rated conditions in open ground straight line measured maximum distance decoding, general , a high-power transmitter module straight road in the city a distance of 1 kilometer. Since the work within the UHF band electromagnetic wave propagation along a straight line, an obstacle will be a drastic attenuation, remote control distance shortened significantly, it should be used to avoid obstacles, or try to stand tall antenna.
 
 

Product Name: 8ch DC 5V 12V Multi-function VS1838 IR infrared control Delay Relay Module Flip-Flop Latch Bistable Self-locking Interlock Latch Switch Board
 
  
Package inlcuded:
1 PCS  8 Channel IR remote control
1 PCS  8 Channel IR Relay Control
Description: 
  
Product Specifications:
1 Operating Voltage : DC 12V/5V
2 Operating Current(DC 12V) : Standby current 8-9MA, 1 relay open 37MA, 2 relays open 66MA, 3 relays open 94MA, 4 relays open 122MA, 5 relays open 150MA, 6 relays open 178MA, 7 relays open 205MA, 8 relays open 231MA
3  ''Momentary'' ''Self-locking'' ''Interlock'' ''Delay'' Four functional modes
4 Infrared receiver: VS1838(Or compatible IC)
5 Infrared remote control: NEC coding
6 Working distance: 8-15 meters (receiver sensitivity ≥0.5mW / m2)
7 Input control pins 8 ,5V TTL level ,NPN trigger, 0.2-2 second low pulse
8 Size: 99 x 62 x 20 mm
9 Weight : 118g
10 Relay maximum load capacity: DC 1-110V/5A; AC 85-265V/6A
   
Product Features:
8 channel Multi-function infrared controller, each channel independently triggered independent delay, do not interfere with each other. 
4 kinds of Functional mode: Non-locking (Momentary );Delay(2/10/60/600/3600seconds); Self-locking (Toggle); Inter-locking (Latch), The function mode and delay time are selected by the Solder pad.
Low pulse trigger(Connect to the power supply GND via the trigger button or low level control via the MCU IO port) 
 
  
Glossary:
NO         : Relay normally open contact
COM       : Relay common contact
NC         : Relay normally closed contact
Relay open: COM connect NO.
Relay close: COM disconnect NO.
Momentary  : Press the remote control button (or trigger input port), Relay open, return to Close  after 0.5 second;
Self-locking : Press the remote control button (or trigger input port), Relay open, Press again, port Relay close, and so on;
Latched     : Enter the Channel 1 Latched command, port 1 Relay open, port 2-8 Relay close. Enter the Channel 2 Latched command , port 2 Relay open, port 1/3-8 Relay close
Delay     : Enter the Delay command, Relay open, delay of 2/10/60/600/3600 seconds)after, Relay close;
 
Function mode selection by shorting three pads M2 1 0
  
Infrared remote control Technical Parameters
 
Transmission / coding: NEC coding
IRED: Infrared
Wavelength: 950nm
Power supply: DC 3V
Working voltage: 2.2-3.4V
Working current: ≥10mA
Static current: ≥1uA
Transmit power: 90 mW / sr typ.
Working distance: 8-15 meters (receiver sensitivity ≥0.5mW / m2)
Frequency: 38 kHz
Battery: CR2025(Not included)
Operating temperature: 55 ~ -45 or specific specifications
Storage temperature: -25 ~ 55 or specific specifications
Size : 85 x 40 x 7mm
Weight : 11g